2018 MAZDA MODEL CX-3 display

remote start open bonnet seat adjustment wheelbase ABS parking sensors

Page 28 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) 26 MAZDAUSA.COM Active Driving Display DI\fTAN\bE RE\bOGNITION \fUPPORT \fY\fTEM (IF EQUIPPED) DISTANCE RECOGNITION SUPPORT SYSTEM (DRSS) The DRSS measures the distance between your vehicle and a$

Page 29 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) m{zd{ c x-3 27 TRAFFI\b \fIGN RE\bOGNITION (IF EQUIPPED) TRAFFIC SIGN RECOGNITION (TSR) SYSTEM The TSR system helps prevent the driver from overlooking traffic signs and provides support for safe$

Page 30 of 50

MAZDA MODEL CX-3 2018 Smart Start Guide (in English) 28 MAZDAUSA.COM
BLIND SPOT MONITORING (BSM)
The BSM system is designed to assist the driver by monitoring blind spots on the left
and right sides of the vehicle in certain situations, such as lan

28 MAZDAUSA.COM
BLIND SPOT MONITORING (BSM)
The BSM system is designed to assist the driver by monitoring blind spots on the left
and right sides of the vehicle in certain situations, such as lane chan\Xges.
•
The B\fM detects vehicles approaching from the rear while traveling in
the forward direction at a speed \.of 6.3 mph or more and notifies the
driver by turning on the B\fM w\.arning indicator light and displaying the vehicle detection screen (vehicles with Active Driving Display).
•
If the turn signal lever is operated to signal a turn in the direction
in which the B\fM warning indicator light is illuminated while the
approaching vehicle is detected, the B\fM warns the driver by turning on the B\fM warning indicator light, and by activating the warning sound and
the warning screen indicator display
(vehicles with Active Driving Display).
•
The detection area on this system
covers the driving lane\.s on both sides
of the vehicle and from the rear part
of the front doors to about 164 ft behind the vehicle.
• B\fM sensors are located under the
left and right rear bumper areas.
The B\fM system may not operate properly if the rear bumper is dirty,
so keep the rear bumper area clean
and free of bumper stickers.
NOTE:
•
The B\fM can assist the driver in confirming the safety
of the surroundings, but is not a complete substitute.
•
The driver is responsible for ensuring safe lane changes
and other maneuvers.
•
Always pay attention to the direction in which th\.e vehicle
is traveling and the vehicle’s surroundings.
Turning BSM System Off:
Turning the B\fM system off will turn off both the light and sound indicators. To turn the B\fM system off, push the B\fM OFF \.switch on the dash.
The B\fM OFF indicator in the instrument cluster will turn on to indicate the B\fM system is off.
NOTE: Turning the B\fM system off will also turn off the Rear \bross Traffic Alert system.
BLIND \fPOT MONITORING \fY\fTEM
WARNING:
B\fM is only a
supplementary
system to help
aid in monitoring
blind spots;
however, B\fM
has limitations.
The system may
not detect all
vehicles, especially
a motorcycle. Do
not rely solely on
the B\fM. Relying
solely on the
B\fM may cause
an unexpected
accident resulting
in death or serious
injury. Make sure
to look over your
shoulder before
changing lanes.
Your
vehicle
Detection areas
ACTIVE DRIVING DISPLA\XY
WHITE Vehicle
Detected
AMBER Vehicle
Detected
with Turn
\fignal On
BSM switch
2940109_18b CX-3 SSG_060817.indd 286/8/17 2:39 PM

Page 36 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) 34 MAZDAUSA.COM AUDIO \bONTROL\f (IF EQUIPPED) AUDIO OPERATION The following icons are displayed on the screen: Sources: Displays the Audio menu to change the audio s\.ource (AM, FM, XM, Blu$

34 MAZDAUSA.COM
AUDIO \bONTROL\f
(IF EQUIPPED)
AUDIO OPERATION
The following icons are displayed on the screen:
Sources: Displays the Audio menu to change the audio s\.ource (AM, FM, XM, Bluetooth
®, Aha, Pandora, \ftitcher,
U\fB, AUX).

Auto Memory: Displays a list of the
10 strongest radio stations. Because
station strength changes as you drive,
select the Update \ftation List icon to re-scan for strong stations.

Favorites: Displays a list of your
favorite AM, FM, and XM radio stations.

HD Radio: \fwitches HD radio on/off.

Scan: \fcans radio stations or songs
(scanning stops at each one for five seconds). \felect again to stop.

Tuner: Displays manual radio tuner.

Tag: \faves artist and title and sends
them to your Apple device (for Apple
devices with U\fB use only).

Seek Previous/Next: \felects previous
or next receivable radio station or song. Push and hold \.to change the radio station continually.

Settings: Adjusts the audio qualit\.y
level (bass, treble, etc.).
The following icons are displayed on the USB and \XBT music screens only:
Track List: Displays the track list.

Repeat: Repeats the current song.
\felect again to stop.

Shuffle: Plays the songs in random
order. \felect again to stop.

Play/Pause: Plays and pauses
the song.

New Mazda vehicles equipped with \fir\.iusXM® \fatellite Radio will receive an introductory four-
month trial subscription that starts on the day the vehicle is sold. Enjoy over 150 channels including commercial-free music, plus sports, comedy, entertainment, news and much more.
To start listening to \firiusXM, select XM from audio sources, then push channe\.l up and down to listen to over 150 channels. If you do not hear audio, please activate service to your radio with a simple\. refresh process.
1
\fcroll to XM Radio, go to channel 1 and pu\.sh “previous” to channel 0 to find your radio ID.
2
Go to siriusxm.com/refresh and enter radio ID or call 1\f855\fMYREFRESH (1-855-697-3373).
HD RADIO
HD radio has a special receiver which allows it to receive digital broadcasts (where available) in addition to the analog broadcasts it already receives. Digital broadcasts have better
sound quality than analog broadcasts as digital broadcasts provide free, crystal clear audio.
When the HD radio button is ON (red), there could be a noticeable difference in sound
quality and volume when a chang\.e from digital to analog signals o\.ccurs. If the sound
quality and volume become noticeably diminished or\. cut off, select the HD button to turn HD radio OFF (not red).
2940109_18b CX-3 SSG_060817.indd 346/8/17 2:40 PM

Page 37 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) m{zd{ c x-3 35 AUDIO \bONTROL\f (IF EQUIPPED) AUDIO OPERATION USING VOICE Audio operation and media selection can be done using v\.oice recognition. Push the TALK button on the steering wheel,$

Page 42 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) 40 MAZDAUSA.COM GLOSSARY OF WARNING AND INDICATOR LIGHTS Lane Departure Warning System (LDW\f) On (Amber)/ Lane Detected (Green) (p. 24) Lane Departure Warning System (LDW\f) OFF$

Page 43 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) m{zd{ c x-3 41 IN\fTRUMENT \bLU\fTER \fee your Owner’s Manual for more details and explanations. 1 Rotate the knob to adjust the brightness of the instrument cluster and other dashboard illumina$

m{zd{ c x-3 41
IN\fTRUMENT \bLU\fTER
\fee your Owner’s Manual for more details and explanations. 1 Rotate the knob to adjust the brightness of the instrument cluster and other dashboard illuminations.
2 Push to toggle between trip meter (A & B). When a trip meter is selected, push and hold \.to reset to zero.
Push the knob for 1.5 seconds or more to change the speed\. units between mph.
ENGINE COOLANT TEMPERATURE LIGHTS
Since this vehicle does not use an engine coolant temperature gauge, red and blue
engine coolant temperature lights are used to indicate high and low coolant temperature.
Red Coolant Temperature
FLA\fHING: Engine is starting to run hot.
Drive slowly to reduce engine load.
ON: Engine is overheating. \fafely pull
over to the side of the road and turn the
engine off. Refer to the Owner’s Manual for more information. Blue Coolant Temperature
ON: Engine coolant is cold and no warm air is available for heater/defroster.
OFF: Engine coolant is warm and warm air is available for heater/defroster. The light
may stay on for a few minutes after start- up when the engine\. is cold, but the vehicle
can be driven with the light on or off.
TRIP COMPUTER
The following information can be selected by pushing the or of the INFO button on
the steering wheel.
• Approximate distance you can travel on the available fuel (RANGE)
•
Average fuel economy •
\burrent fuel economy • Average vehicle speed

To reset, push and hold th\.e INFO button for more than 1.5 seconds.
OUTSIDE TEMPERATURE DISPLAY
The outside temperature unit can be switched between °\b and °F using\. \fystem \fettings
in the Infotainment \fystem.
IMPORTANT: When your MAZDA \bONNE\bT display setting is set on “AUTO”, the
instrument cluster and display may become dimmer when th\.e headlights are on. If the
display and instrument cluster become too dim or too bright when the headlights are on, simply rotate the dimmer knob \.located on your instrument cluster to adjust the brightness.
TPMS NOTE: Low ambient temperature and/or high altitude may cause tire pressures to
change and turn the TPM\f warning light on. If the warning light comes on, see p. 6.
2940109_18b CX-3 SSG_060817.indd 416/8/17 2:40 PM

Page 48 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) VEHICLE PRESENTATION: Refer to the \fmart \ftart Guide during presentation. ESSENTIAL INFORMATION Driver\bs View • Location of \fwitches and \bontrols Advanced Keyless Entry System* •$

Page: < prev 1-8 9-16 17-24