2018 LINCOLN CONTINENTAL cruise control

[x] Cancel search: cruise control

Page 115 of 615

LINCOLN CONTINENTAL 2018  Owners Manual Direction Indicator
Illuminates when the left or rightturn signal or the hazard warningflasher is turned on. If theindicators stay on or flash faster, check for aburned out bulb.  See Changing a Bulb(

Page 120 of 615

LINCOLN CONTINENTAL 2018  Owners Manual Settings
Settings
See Display OptionsInfo/Trip/Fuel
Gauges
Traction Control
Select Your SettingHandling in DDrive Control
Handling in S
Performance inS
BlindspotDriver Assistance
Cross Traffic Alert
S

Page 127 of 615

LINCOLN CONTINENTAL 2018  Owners Manual Active Park
ActionMessage
The system requires service due to a malfunction. Have the system checked by an authorizeddealer.Active Park Fault
Adaptive Cruise Control
ActionMessage
A radar malfunction i

Page 145 of 615

LINCOLN CONTINENTAL 2018  Owners Manual ActionMessage
Displays when the brake pedal needs to be depressed to enable the transmission to shift frompark.Depress Brake to Shift from Park
Displays when neutral hold is active. See Automatic Tran

Page 147 of 615

LINCOLN CONTINENTAL 2018  Owners Manual Head-Up Display (HUD)
Turns the HUD on and off.HUD On
Follow onscreen directions to confirm or modify your settings.Brightness
Follow onscreen directions to confirm ormodify your settings.Vertical Pos

Page 240 of 615

LINCOLN CONTINENTAL 2018  Owners Manual PRINCIPLE OF OPERATION
Cruise control lets you maintain a set speedwithout keeping your foot on the acceleratorpedal. You can use cruise control when yourvehicle speed is greater than 20 mph(30 km/h).

Page 241 of 615

LINCOLN CONTINENTAL 2018  Owners Manual Resuming the Set Speed
Press RES.
Switching Cruise Control Off
Note:You erase the set speed when youswitch the system off.
Press OFF when the system is in standbymode, or switch the ignition off.
USIN

Page 242 of 615

LINCOLN CONTINENTAL 2018  Owners Manual The adaptive cruise controls are on thesteering wheel.
Switching Adaptive Cruise Control On
Press ON.
The indicator, current gap settingand set speed appear in theinformation display.
Setting the Adap
Page:   < prev 1-8 9-16 17-24 25-32 next >