2018 Lexus LC500 service

348
-$@-$I@0.@0.&@ &&

6-3. Do-it-yourself maintenance
5Remove the filter case.
6 Remove the air conditioning filter
from the filter case and replace it
with a new one.
The “ UP” marks shown on the filter and
the filter case should be pointing up.
■Checking interval
Inspect and replace the air conditioning fil- ter according to the maintenance schedule. In dusty areas or areas with heavy traffic
flow, early replacement may be required. (For scheduled maintenance information, please refer to the “Lexus Service Booklet”
or “Lexus Warranty Booklet”.)
■If air flow from the vents decreases dra- matically
The filter may be clogged. Check the filter and replace if necessary.
■Air conditioning filter with deodorizing function
When fragrances are placed in your vehi- cle, the deodorizing effect may become
significantly weakened in a short period.
When an air conditioning odor comes out continuously, replace the air conditioning filter.
NOTICE
■When using the air conditioning sys-tem
Make sure that a filter is always installed. Using the air conditioning system without
a filter may cause damage to the system.
■To prevent damage to the filter cover
When moving the filter cover in the
direction of arrow to release the fitting, pay attention not to apply excessive force to the claws. Otherwise, the claws may
be damaged.

362
-$@-$I@0.@0.&@ &&

7-2. Steps to take in an emergency
7-2.Steps to take in an emergency
If your vehicle needs to be
towed
If towing is necessary, we recom-
mend having your vehicle towed by
any authorized Lexus retailer or
Lexus authorized repairer, or any
reliable repairer or commercial
towing service, using a wheel-lift
type truck or flatbed truck.
Use a safety chain system for all
towing, and abide by all state/pro-
vincial and local laws.
WARNING
Observe the following precautions. Failure to do so may result in death or
serious injury.
■When towing the vehicle
LC500: Be sure to transport the vehicle with all four wheels raised off the ground. If the vehicle is towed with the tires con-
tacting the ground, the drivetrain and related parts may be damaged or an accident may occur due to a change in
direction of the vehicle.
LC500h: Be sure to transport the vehi- cle with all four wheels raised off the
ground. If the vehicle is towed with the tires contacting the ground, the drive-train and related parts may be damaged,
an accident may occur due to a change in direction of the vehicle or electricity generated by the operation of the motor
may cause a fire to occur depending on the nature of the damage or malfunction.
■While towing
●When towing using cables or chains, avoid sudden starts, etc. which place excessive stress on the towing eyelets,
cables or chains. The towing eyelets, cables or chains may become dam-aged, broken debris may hit people,
and cause serious damage.
●Do not turn the engine switch off.This may lead to an accident as the
rear wheels will be locked by the park- ing lock. Also, there is a possibility that the steering wheel is locked and can-
not be operated.
■Installing towing eyelets to the vehi- cle
Make sure that towing eyelets are installed securely.
If not securely installed, towing eyelets may come loose during towing.

363
7
-$@-$I@0.@0.&@ &&

7-2. Steps to take in an emergency
When trouble arisesIn the following situations, it is not pos-
sible to be towed by another vehicle
using cables or chains, as the rear
wheels may be locked due to the park-
ing lock. Contact any authorized Lexus
retailer or Lexus authorized repairer,
or any reliable repairer or commercial
towing service.
 There is a malfunction in the shift
control system. ( P.166, 170, 381)
 There is a malfunction in the engine
immobilizer system system>. ( P.70)
 There is a malfunction in the smart
entry & start system. ( P.389)
 The 12-volt battery is discharged.
( P.392)
The following may indicate a problem
with your transmission. Contact any
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer or commercial towing service
before towing.
 LC500: The engine is running but
the vehicle does not move.
 LC500h: The hybrid system warn-
ing message is shown on the multi-
information display and the vehicle
does not move.
 The vehicle makes an abnormal
sound.
Do not tow with a sling-type truck to
prevent body damage.
NOTICE
■To prevent damage to the vehicle when towing using a wheel-lift type truck
●Do not tow the vehicle from the rear
when the engine switch is off. The steering lock mecha-nism is not strong enough to hold the
front wheels straight.
●When raising the vehicle, ensure ade- quate ground clearance for towing at the opposite end of the raised vehicle.
Without adequate clearance, the vehi- cle could be damaged while being towed.
■To prevent damage to the vehicle
when towing with a sling-type truck
Do not tow with a sling-type truck, either from the front or rear.
■To prevent damage to the vehicle during emergency towing
Do not secure cables or chains to the
suspension components.
Situations when it is not possible
to be towed by another vehicle
Situations when it is necessary to
contact dealers before towing
Towing with a sling-type truck

384
-$@-$I@0.@0.&@ &&

7-2. Steps to take in an emergency
Take your vehicle to the nearest autho-
rized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer,
or authorized tire dealer as soon as
possible if any tire goes flat.
The vehicle can be driven for a maximum
of 160 km (100 miles) at a speed below 80
km/h (50 mph) after the tire pressure
warning light comes on. ( P.374)
A run-flat tire has a mark on the
side wall.
■In some condition (such as at high tem-
peratures)
You cannot continue driving for up to 160 km (100 miles).
■For the detailed information on run-flat tires
See the tire warranty booklet.
If you have a flat tire
Your vehicle is not equipped with a
spare tire, but instead you can con-
tinue driving the vehicle with run-
flat tires even if any tire goes flat.
In this case, slow down and drive
with extra caution.
Run-flat tires
NOTICE
■When replacing the tires
When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact any authorized
Lexus retailer or Lexus authorized repairer, or any reliable repairer as the tire pressure warning valve and transmit-
ter may be damaged if not handled cor- rectly.
■When driving over bumps
If a vehicle has a flat tire, the vehicle height will be lower than usual. Ensure
that nothing strikes the bottom of the vehicle.
■To avoid damaging the tire pressure warning valves and transmitters
When a tire is repaired with liquid seal-
ants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact any autho-
rized Lexus retailer or Lexus authorized repairer, or any reliable repairer or other qualified service shop as soon as possi-
ble. Make sure to replace the tire pres- sure warning valve and transmitter when replacing the tire. ( P.335)

401
7
-$@-$I@0.@0.&@ &&

7-2. Steps to take in an emergency
When trouble arises
radiator core (radiator) for any
leaks.
Radiator
Cooling fan
If a large amount of coolant leaks, immedi-
ately contact any authorized Lexus retailer
or Lexus authorized repairer, or any reli-
able repairer.
4 The coolant level is satisfactory if it
is between the “F” and “L” lines on
the reservoir.
Reservoir
“F” line
“L” line
Coolant inlet cap
5 Add coolant if necessary.
Water can be used in an emergency if
coolant is unavailable.
6 Start the engine and turn the air
conditioning system on to check
that the radiator cooling fan oper-
ates and to check for coolant leaks
from the radiator or hoses.
The fan operates when the air conditioning
system is turned on immediately after a cold start. Confirm that the fan is operating by checking the fan sound and air flow. If it
is difficult to check these, turn the air con- ditioning system on and off repeatedly. (The fan may not operate in freezing tem-
peratures.)
7 If the fan is not operating:
Stop the engine immediately and
contact any authorized Lexus
retailer or Lexus authorized
repairer, or any reliable repairer.
If the fan is operating:
Have the vehicle inspected at the
nearest authorized Lexus retailer
or Lexus authorized repairer, or any
reliable repairer.
■When adding coolant
Add coolant in accordance with the follow- ing procedure.
1 Remove the service cover.
A
B
A
B
C
D

405
7
-$@-$I@0.@0.&@ &&

7-2. Steps to take in an emergency
When trouble arises
“F”/“FULL” line
“L”/“LOW” line
5 Add coolant if necessary.
Water can be used in an emergency if
power control unit coolant is unavailable.
6 After stopping the hybrid system
and waiting for 5 minutes or more,
start the hybrid system again and
check if “Hybrid System Over-
heated Reduced Output Power” is
shown on the multi-information dis-
play.
If the message does not disappear:
Stop the hybrid system and contact any authorized Lexus retailer or Lexus autho-rized repairer, or any reliable repairer.
If the message is not displayed:
The hybrid system temperature has dropped and the vehicle may be driven normally.
However, if the message appears again fre-
quently, contact any authorized Lexus retailer or Lexus authorized repairer, or any reliable repairer.
■When adding engine coolant
Add coolant in accordance with the follow- ing procedure.
1 Remove the service cover.
2 Remove the engine cover.
3 Remove caps and .
4 Add coolant through the inlet of the cap
up to the “F” line , and then
replace the cap .
5 Add coolant through the inlet of cap
until it is full, and then replace the
cap .
B
C
AB
AC
A
B
B

414
-$@-$I@0.@0.&@ &&

8-1. Specifications
higher value) may be better suited if
the vehicle is operated at high
speeds, or under extreme load con-
ditions.
How to read oil container labels:
Either or both API registered marks
are added to some oil containers to
help you select the oil you should use.
API Service Symbol
Top portion: “API SERVICE SN” means the
oil quality designation by American Petro-
leum Institute (API).
Center portion: “SAE 5W-30” means the
SAE viscosity grade.
Lower portion: “Resource-Conserving”
means that the oil has fuel-saving and envi-
ronmental protection capabilities.
ILSAC Certification Mark
The International Lubr icant Specification
Advisory Committee (ILSAC) Certifica-
tion Mark is displayed on the front of the
container.
LC500h
■Oil capacity (Drain and refill [Ref-
erence*])
*: The engine oil capacity is a reference
quantity to be used when changing the
engine oil. Warm up the engine and turn
off the hybrid system, wait more than 5
minutes, and check the oil level on the
dipstick.
■Engine oil selection
“Toyota Genuine Motor Oil” is used in
your Lexus vehicle. Lexus recom-
mends the use of approved “Toyota
Genuine Motor Oil”. Another motor
oil of matching quality can also be
used.
Oil grade:
0W-20, 5W-30 and 10W-30:
API grade SL “Energy-Conserving”,
SM “Energy-Conserving” or SN
“Resource-Conserving”; or ILSAC
multigrade engine oil
15W-40:
API grade SL, SM or SN multigrade
engine oil
Recommended viscosity (SAE):
SAE 0W-20 is filled into your Lexus
vehicle at manufacturing, and the best
choice for good fuel economy and
good starting in cold weather.
If SAE 0W-20 oil is not available, SAE
5W-30 oil may be used. However, it
should be replaced with SAE 0W-20
at the next oil change.
If you use SAE 10W-30 or a higher vis-
cosity engine oil in extremely low tem-
peratures, the engine may become
difficult to start, so SAE 0W-20 or
5W-30 engine oil is recommended.With filter5.7 L (6.0 qt., 5.0 Imp.qt.)
Without filter5.5 L (5.8 qt., 4.8 Imp.qt.)
A
B

415
8
-$@-$I@0.@0.&@ &&

8-1. Specifications
Vehicle specifications
Temperature range anticipated
before next oil change.
Preferred
Oil viscosity (0W-20 is explained here
as an example):
• The 0W in 0W-20 indicates the
characteristic of the oil which allows
cold startability. Oils with a lower
value before the W allow for easier
starting of the engine in cold
weather.
• The 20 in 0W-20 indicates the vis-
cosity characteristic of the oil when
the oil is at high temperature. An oil
with a higher viscosity (one with a
higher value) may be better suited if
the vehicle is operated at high
speeds, or under extreme load con-
ditions.
How to read oil container labels:
Either or both API registered marks
are added to some oil containers to
help you select the oil you should use.
API Service Symbol
Top portion: “API SERVICE SN” means the
oil quality designation by American Petro-
leum Institute (API).
Center portion: “SAE 0W-20” means the
SAE viscosity grade.
Lower portion: “Resource-Conserving”
means that the oil has fuel-saving and envi-
ronmental protection capabilities.
ILSAC Certification Mark
The International Lubricant Specification
Advisory Committee (ILSAC) Certifica-
tion Mark is displayed on the front of the
container.
A
B
A
B