2018 Lexus LC500 fuse

195
7
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
Phone
5Check that the call screen is dis-
played.
 The current location of the vehicle is
displayed at bottom on the screen.
■Roadside assist
This feature is used to make a call to
Lexus roadside assist service.
The call has to be placed from a coun-
try where Lexus roadside assist service
is available.
To use this function, it is necessary to
register a country. ( P.212)
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “Favourites” on the sub
menu.
4 Select “Lexus Euro assistance 24”.
5 Select .
6 Check that the call screen is dis-
played.
 The current location of the vehicle is
displayed at bottom on the screen.
1 Select “Answer” or press the
switch on the steering wheel to talk
on the phone.
Main display
Side display
To refuse to receive the call: Select “Decline”.
To adjust the volume of a received call: Turn the “PWR·VOL” knob, or use the volume
control switch on the steering wheel.
●During international phone calls, the
other party’s name or number may not be
Receiving on the Bluetooth®
phone
When a call is received, this screen
is displayed with a sound.
This screen can also be displayed
on the side display.
Incoming calls

198
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
1Select “Transmit volume” on the sub
menu.
2 Select the desired level for the
transmit volume.
3 Press the button on the
Remote Touch to display previous
screen.
●The sound quality of the voice heard from the other party’s speaker may be nega-
tively impacted.
●“Transmit volume” is dimmed when mute
is on.
When a call is interrupted by a third
party while talking, the incoming
screen is displayed.
The incoming screen can also be dis-
played on the side display.
1 Select “Answer” or press the
switch on the steering wheel to
start talking with the other party.
 To refuse to receive the call: Select
“Decline”.
 Each time “Swap calls” is selected,
the party who is on hold will be
switched.
●This function may not be available
depending on the type of cellular phone.
●This screen can be displayed on the main
display or side display.
 When there are no calls on hold
during a call: “Hold” is displayed.
When selected, the current call is
placed on hold.
 When there is no current call, but
there is a call on hold: “Activate” is
displayed. When selected, the sys-
tem switches to the call that was on
hold.
 When there is another call on hold
during a call: “Swap calls” is dis-
played. When selected, the current
call is placed on hold, and the sys-
tem switches to the call that was on
hold.
●This function may not be available depending on the type of cellular phone.
●This screen can be di splayed on the main display or side display.
Transmit volume setting
Incoming call waiting
Switching calls whil e a call is in
progress

242
-$@-$I@/BWJ@0.&@ &&

Government End Users. If the Data is being acquired by or on behalf of the United
States government or any other entity seek ing or applying rights similar to those
customarily claimed by the United States government, this Data is a “commercial
item” as that term is defined at 48 C.F.R. (“FAR”) 2.101, is licensed in accordance
with these End-User Terms, and each copy of Data delivered or otherwise
furnished shall be marked and embedded as appropriate with the following
“Notice of Use,” and shall be treated in accordance with such Notice:
If the Contracting Officer, federal government agency, or any federal official
refuses to use the legend provided herein, the Contracting Officer, federal
government agency, or any federal official must notify HERE prior to seeking
additional or alternative rights in the Data.
NOTICE OF USE
CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME: HERE
CONTRACTOR (MANUFACTURER/SUPPLIER) ADDRESS:
425 West Randolph Street, Chicago, Illinois 60606
This Data is a commercial item as defined in FAR 2.101 and is subject to these End-User
Terms under which this Data was provided.
© 1987 - 2017 HERE – All rights reserved.