2018 Lexus LC500 USB

194
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
2Check that a confirmation screen is
displayed when the operation is
complete.
■For PBAP incompatible but OPP
compatible Bluetooth® phones
1 Select the desired item.
Select to transfer the contacts from
the connected cellular phone.
Follow the steps in “Transfer con-
tacts from device” from step 2.
( P.207)
Select to add a new contact manu-
ally.
Follow the steps in “Registering a
new contact to the contacts list”
from step 2. (P.209)
Select to cancel transferring.
●If your cellular phone is neither PBAP nor OPP compatible, the contacts cannot be
transferred using Bluetooth®. But the contacts can be transferred from USB device. ( P.208)
●Depending on the type of Bluetooth® phone:
• It may be necessary to perform additional steps on the phone when transferring contact data.
• The registered image in the contact list may not transfer depending on the type
of Bluetooth® phone connected.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “Keypad” on the sub
menu and enter the phone number.
4 Select or press the switch
on the steering wheel.
5 Check that the call screen is dis-
played.
●Depending on the type of Bluetooth® phone being connected, it may be neces-
sary to perform additional steps on the phone.
■112 emergency call support
This feature is used to make a 112
emergency call. This function is not
available when the hands-free system
is not connected.
The call has to be placed from a coun-
try where 112 is available.
●The SOS function uses a different system than the ERA-GLONASS system (if equipped).
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “Keypad” on the sub
menu and select “SOS”.
4 Select “112”.
A
B
C
By keypad
SOS

208
-$@-$I@/BWJ@0.&@ &&

7-2. Setup
3Select “Replace contacts” or “Add
contact”.
“Replace contacts”: Select to transfer the contact from the connected cellular phone
and replace the current one.
“Add contact”: Select to transfer the
desired contact data from the connected cellular phone to add to the current one.
4 Transfer the contact data to the sys-
tem using a Bluetooth® phone.
 This operation may be unnecessary
depending on the type of cellular
phone.
 To cancel this function, select “Can-
cel”.
5 Check that a confirmation screen is
displayed when the operation is
complete.
 This function is only for OPP com-
patible Bluetooth® phone.
■Updating the contacts (From the
“History” screen)*
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “History” on the sub
menu and select a contact not yet
registered in the contact list.
4 Select “Update contact”.
5 Select the desired contact.
6 Select a phone type for the phone
number.
*: For PBAP compatible Bluetooth®
phones, this function is available when
“Automatic transfer” is set to off.
( P.206)
Backed-up contact data (“vCard” for-
matted) can be transferred from USB
device or Bluetooth® phone to this
system.
1 Slide the armrest as far back while
pressing the button.
2 Lift the armrest while pulling the
knob.
3 Open the cover and connect a
device or Bluetooth® phone.
From USB

209
7
-$@-$I@/BWJ@0.&@ &&

7-2. Setup
Phone
Turn on the power of the USB
device if it is not turned on.
4 Select “Transfer contacts from
device”.
5 Select “From USB”.
6 Select “USB 1” or “USB 2” when
the multiple USB devices are con-
nected. If a USB device is con-
nected, skip this procedure.
7 Select “Replace contacts” or “Add
contact”. If the contact is not regis-
tered, skip this procedure.
“Replace contacts”: Select to transfer the
contact from the connected USB device or
Bluetooth® phone and replace the current
one.
“Add contact”: Select to transfer the
desired contact data from the connected
USB device or Bluetooth® phone to add
to the current one.
8 Select a desired file from vCard file
list.
9 Check that a confirmation screen is
displayed when the operation is
complete.
●Depending on the type of phone used
and number of files, it may take time to download contacts.
●Downloading may not complete cor-rectly in the following cases:• If the engine switch is
turned off during downloading.
• If the USB device or Bluetooth® phone is
removed before downloading is com- plete.
New contact data can be registered.
Up to 4 numbers per person can be
registered.
1 Select “New contact”.
2 Enter the name and select “OK”.
3 Enter the phone number and select
“OK”.
4 Select the phone type for the
phone number.
5 To add another number to this con-
tact, select “Yes”.
■Registering a new contact in a dif-
ferent way (From the “History”
screen)
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “History” on the sub
menu and select a contact not yet
registered in the contact list.
4 Select “Add to contacts”.
5 Follow the steps in “Registering a
new contact to the contacts list”
from step 2. (P.209)
1 Select “Edit contact”.
2 Select the desired contact.
3 Select next to the name or
desired number.
4 Enter the name or the phone num-
ber and select “OK”.
Registering a new contact to the
contacts list
Editing the contact data

219
8
-$@-$I@/BWJ@0.&@ &&

8-1. Connected services
Connected services
System
The results are displayed.
*: For details about Lexus portal site, refer to www.my.lexus.eu.
Importing favourites and routes: Downloading via the internet
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
Name/operation
Your personal computer and Lexus portal site*
Access Lexus portal site and search POIs and routes.
Lexus portal site*
The POIs and routes are saved on Lexus portal site.
System
Via the internet, the POIs are downloaded to the system.
*: For details about Lexus portal site, refer to www.my.lexus.eu.
Importing favourites and routes : Downloading from a USB memory
Name/operation
Your personal computer and Lexus portal site*
Access Lexus portal site and search POIs and routes.
C
A
B
C
A

220
-$@-$I@/BWJ@0.&@ &&

8-1. Connected services
Lexus portal site*
The POIs and routes are saved on Lexus portal site.
USB memory
The POIs and routes are saved to the USB memory.
System
Via the USB memory, the POIs and routes are downloaded to the system.
*: For details about Lexus portal site, refer to www.my.lexus.eu.
Observe the following precaution:
 Before using this service, it is neces-
sary to access Lexus portal site and
create an account. It needs to make
new account before using con-
nected service.
There are 2 methods to make new
account. ( P.221)
• Obtaining an account via Lexus Portal
site. ( P.221)
• Obtaining an account via the system.
( P.221)
When using a cellular phone to con-
nect to the internet, observe the follow-
ing precautions:
 In order to use this service, a
Bluetooth® PAN compatible cellu-
lar phone with sufficient network
coverage and a SIM card with a
contract that allows access to the
internet are required.
 When using the connected ser-
vices, depending on your phone
subscription, some related fees
might apply.
 When a cellular phone is used in a
roaming situation (when outside the
geographical coverage area of
mobile network provider) connec-
tion fees may apply.
B
C
D
Before using connected services

222
-$@-$I@/BWJ@0.&@ &&

8-1. Connected services
To access Lexus portal site via the
internet, the cellular phone or Wi-Fi®
must already be registered with the
system. ( P.221)
Online search
New establishments or establish-
ments that are not registered in the
system can be set as a destination.
In order to perform an online
search, the system must already be
connected to the internet.
The followings are the online
search related functions.
 Search box P.79
 POI search P.85
 POI details P.87
Importing favourites and
stored routes
POIs and routes searched on Lexus
portal site can be downloaded to
the system and saved as favourites.
There are 2 methods to download
POIs and routes to the system:
(a) After saving the POIs and
routes on Lexus portal site, they can
be downloaded via the internet.
(b) After saving the POIs and
routes on Lexus portal site, down-
load them to a USB memory.
The POIs and routes can then be
downloaded via the USB memory.
When downloading POIs and
routes to the system, both proce-
dures are performed in the vehicle.
For details about POI and route
searches on Lexus portal site and
downloading POIs and routes to a
USB memory, refer to
www.my.lexus.eu.
Registering an external point as
a favourite and routes from the
internet

223
8
-$@-$I@/BWJ@0.&@ &&

8-1. Connected services
Connected services
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Online” on the sub menu.
4 Select “Lexus Online”.
5 Select “Lexus web account”.
6 Select “Load POIs and routes from
server”.
7 Check that a confirmation screen is
displayed when the operation is
complete.
 To edit favourites and routes:
 P.103
●Setting “Auto download” to “on” will auto- matically download external points.
( P.229)
●Even if there is same name of favourite, it
will be displayed on the list without over- write.
1 Slide the armrest as far back while
pressing the button.
2 Lift the armrest while pulling the
knob.
3 Open the cover and connect a
device.
 Turn on the power of the USB mem-
ory if it is not turned on.
Procedure for downloading
favourites and routes from a
USB memory

224
-$@-$I@/BWJ@0.&@ &&

8-1. Connected services
4Insert USB device.
5 Select “Yes” on the popup which
tells “Your USB device contains
POIs and/or routes. Would you like
to add these to the navigation
favourites?”
6 Waiting the process.
7 Complete screen will be displayed.
 All routes and favourites are copied.
8 Waiting until finish copy.
 To cancel this function, select “Can-
cel”.
9 Check that a confirmation screen is
displayed when the operation is
complete.
●Favourites that are located outside of the map’s data range cannot be registered.
●A maximum of 200 favourites can be registered.
●In some cases, favourites and routes may not be able to be imported. If this occurs,
an error message with more details will be displayed.
Street View can be activated whenever
the Street View icon is visible.
For example:
1 A short while later after the “MAP”
button is pressed, the display auto-
matically switches to map screen.
( P.69)
2 Select a point on the map.
3 Press the button on the Remote
touch.
4 Select “Street View”.
5 Check that the picture is displayed.
“<”, “>”: Select to change pictures. Up to 6 pictures per location can be displayed.
●The Street View function can also be
selected from the following screens: • Entire route map screen ( P.90) • Online POI details screen (except traffic
messages) ( P.75)
NOTICE
●Depending on the size and shape of
the device that is connected to the sys- tem, the console box may not close fully. In this case, do not forcibly close
the console box as this may damage the device or the terminal, etc.
Street View
The Street View of the desired loca-
tion can be viewed, provided the
system is connected to the internet.
( P.221)
Displaying the Street View