2018 Lexus LC500 remote control

143
4
-$@-$I@/BWJ@0.&@ &&

4-3. Media operation
Audio/visual system
Using the Remote Touch
1 Press the “MENU” button on the
Remote Touch, then select “Media”.
 Connecting a Miracast™ device
( P.143)
Select to disconnect the Miracast™
device.
Select to change the screen size.
( P.124)
Select to display/hide the control
button.
Select to display the image quality
adjustment screen. ( P.125)
●The Miracast™ sound volume takes into account the sound volume of both the
navigation system and the connected device. Before using Miracast™, adjust the sound volume of the connected
device to an appropriate level.
●When a device that uses Bluetooth® audio is used with Miracast™, no sound may be output from Miracast™. If this
occurs, disabling the Bluetooth® audio may allow sound to be output from
Miracast™.
1 Display the audio source selection
screen.
2 Select “Miracast™”.
3 When a message is displayed,
select “Yes” to turn Wi-Fi® on.
4 Devices that support Miracast™
can now be connected.
 Refer to the instruction manual
included with the external device for
details on how to operate the
device.
 When a device cannot be found,
Control screen
A
B
C
D
WARNING
●Do not connect portable audio device or operate the controls while driving.
NOTICE
●Depending on the size and shape of the portable audio device that is con-
nected to the system, the console box may not close fully. In this case, do not forcibly close the console box as this
may damage the portable audio device or the terminal, etc.
●Do not leave portable audio device in the vehicle. The temperature inside the
vehicle may become high, resulting in damage to the player.
●Do not push down on or apply unnec-essary pressure to the portable audio
device while it is connected as this may damage the portable audio device or its terminal.
●Do not insert foreign objects into the
port as this may damage the portable audio device or its terminal.
Connecting a Miracast™ device

144
-$@-$I@/BWJ@0.&@ &&

4-3. Media operation
select “Search again”.
5 After checking the device name,
select “Yes”.
The Miracast™ screen displays the
same image that is sent from the exter-
nal device. If the external device screen
is vertically-oriented, the screen may
also display a vertical image.
The AUX control screen can be
reached by the following methods:
Using the audio control switch
1 Press the “MEDIA” button.
Using the Remote Touch
1 Press the “MENU” button on the
Re m ot e T ou ch , th e n se l ec t “M e d ia ”.
 Connecting a device to the AUX
port ( P.122)
Miracast™ screen display
AUX
Overview
Control screen
WARNING
●Do not connect portable audio device or operate the controls while driving.
NOTICE
●Depending on the size and shape of the portable audio device that is con-
nected to the system, the console box may not close fully. In this case, do not forcibly close the console box as this
may damage the portable audio device or the terminal, etc.

146
-$@-$I@/BWJ@0.&@ &&

4-4. Audio/visual remote controls
4-4.A udio/visual remote controls
Some parts of the audio/visual system
can be adjusted using the switches on
the steering wheel.
Volume control switch
“MODE” switch
“< >” switch
Steering switches
Steering switch operation
ModeOperation/function
All
Press: Volume up/down
Press and hold (0.8 sec. or
more): Volume up/down
continuously
ModeOperation/function
AM, FM,
DAB, AUX
Press: Change audio
modes
Press and hold (0.8 sec. or
more): Mute
A
B
CD,
MP3/WMA/
AAC disc,
DVD, USB,
iPod,
Bluetooth®
audio
Press: Change audio
modes
Press and hold (0.8 sec. or
more): Pause
Miracast™Press: Change audio mode
ModeOperation/function
AM, FM
Press: Preset station
up/down (Presets screen)
Station list up/down (Sta-
tion list screen)
Seek up/down (Manual
tuning screen)
Press and hold (0.8 sec. or
more): Seek up/down con-
tinuously while the switch is
being pressed (Manual
tuning screen)
DAB
Press: Preset service
up/down (Presets screen)
Service list up/down (Sta-
tion list screen)
Ensemble seek up/down
(Manual tuning screen)
Press and hold (0.8 sec. or
more): Ensemble seek
up/down continuously
while the switch is being
pressed (Manual tuning
screen)
ModeOperation/function
C

147
4
-$@-$I@/BWJ@0.&@ &&

4-4. Audio/visual remote controls
Audio/visual system
CD
Press: Track up/down
Press and hold (0.8 sec. or
more): Fast for-
ward/rewind
MP3/WMA/
AAC disc
Press: File up/down
Press and hold (0.8 sec. or
more): Fast for-
ward/rewind
DVD
Press: Chapter up/down
Press and hold (0.8 sec. or
more): Fast for-
ward/rewind
USB
Press: File/Track up/down
Press and hold (0.8 sec. or
more): Fast for-
ward/rewind
iPod
Press: Track/File up/down
Press and hold (0.8 sec. or
more): Fast for-
ward/rewind
Bluetooth®
audio
Press: Track up/down
Press and hold (0.8 sec. or
more): Fast for-
ward/rewind
ModeOperation/function

150
-$@-$I@/BWJ@0.&@ &&

4-5. Setup
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Audio” on the sub menu.
4 Select “DVD”.
5 Select the items to be set.
Select to change the audio lan-
guage. ( P.150)
Select to change the subtitle lan-
guage. ( P.150)
Select to change the language of
the DVD video menu. ( P.150)
Select to set the angle mark on/off.
Select to set the parental control
level. ( P.151)
Select to set the auto start playback
on/off.
Discs that are inserted while the
vehicle is in motion will automati-
cally start playing. Certain discs
may not play.
Select to set a dynamic range.
( P.151)
Select to initialize all menus.
1 Select “Audio language”.
2 Select the desired language to be
heard.
 If the desired language to be heard
cannot be found on this screen,
select “Other” and enter a language
code. ( P.151)
1 Select “Subtitle language”.
2 Select the desired language to be
read.
 If the desired language to be read
cannot be found on this screen,
select “Other” and enter a language
code. ( P.151)
1 Select “Menu language”.
2 Select the desired language to be
read.
 If the desired language to be read
cannot be found on this screen,
select “Other” and enter a language
code. ( P.151)
DVD settings
A
B
C
D
E
F
Audio language
Subtitle language
Menu language
G
H

195
7
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
Phone
5Check that the call screen is dis-
played.
 The current location of the vehicle is
displayed at bottom on the screen.
■Roadside assist
This feature is used to make a call to
Lexus roadside assist service.
The call has to be placed from a coun-
try where Lexus roadside assist service
is available.
To use this function, it is necessary to
register a country. ( P.212)
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “Favourites” on the sub
menu.
4 Select “Lexus Euro assistance 24”.
5 Select .
6 Check that the call screen is dis-
played.
 The current location of the vehicle is
displayed at bottom on the screen.
1 Select “Answer” or press the
switch on the steering wheel to talk
on the phone.
Main display
Side display
To refuse to receive the call: Select “Decline”.
To adjust the volume of a received call: Turn the “PWR·VOL” knob, or use the volume
control switch on the steering wheel.
●During international phone calls, the
other party’s name or number may not be
Receiving on the Bluetooth®
phone
When a call is received, this screen
is displayed with a sound.
This screen can also be displayed
on the side display.
Incoming calls

200
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
be set to “Full screen” on “Incoming SMS/MMS display” and “Incoming E-mail display”. ( P.205) Default setting is
“Drop-down”.
●Depending on the cellular phone used
for receiving messages, or its registration status with the system, some information may not be displayed.
●The pop up screen is separately available for incoming e-mail and SMS/MMS
messages under the following conditions:
E-mail:
• “E-mail notification pop-up” is set to on.
( P.205)
SMS/MMS:
• “SMS/MMS notification pop-up” is set to
on. ( P.205)
1Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Message” on the sub menu.
4 Select a desired account name that
is displayed on the left side of
screen.
5 Select the desired message from
the list.
6 Check that the message is dis-
played.
Select “Mark unread” or “Mark
read” to mark e-mail unread or
read on the message screen.
This function is available when
“Update message read status on
phone” is set to on. ( P.211)
When the text message type is
SMS, it is not displayed.
Select to reply to the message.
( P.201)
Select to display the previous or
next message.
Select to have messages read out.
To cancel this function, select .
When “Automatic message read-
out” is set to on, messages will be
automatically read out. ( P.211)
Select to make a call to the sender.
●Depending on the type of Bluetooth® phone being connected, it may be neces-sary to perform additional steps on the
phone.
●Messages are displayed in the appropri-
ate connected Bluetooth® phone’s regis- tered mail address folder. Select the desired folder name to be displayed.
●Turn the “PWR·VOL” knob, or use the volume control switch on the steering
wheel to adjust the message read out vol- ume.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Message” on the sub menu.
Checking received messages
A
Checking sent messages
B
C
D
E

234
-$@-$I@/BWJ@0.&@ &&

Alphabetical index
Alphabetical index
A
AM/FM/DAB radio .................................... 126
Overview .........................................................126
Presetting a station......................................126
RDS (Radio data system) ........................ 127
Sub menu......................................................... 127
“Apps” button (Menu screen) .................... 16
Audio/visual remote controls.................. 146
“Audio” button (“Setup” screen).... 20, 148
Audio settings................................................. 148
Audio settings screen............................... 148
Displaying the audio settings screen 148
AUX ................................................................... 144
Overview .........................................................144
Sub menu........................................................ 145
B
Back button (Remote Touch) .............14, 28
Basic function .................................................... 12
Basic information before operation ........28
Basic operation ......................................64, 120
“Bluetooth*” button (“Setup” screen)
.................................................................... 20, 43
Bluetooth® audio.......................................... 139
Connecting a Bluetooth® device........ 141
Overview .........................................................139
Sub menu......................................................... 142
Bluetooth® phone message function... 199
Calling the message sender ................ 202
Checking received messages ........... 200
Checking sent messages ..................... 200
Displaying the message inbox screen
.......................................................................... 199
Receiving a message ................................ 199
Replying to a message (Create new
message) ..................................................... 201
Replying to a message (Quick reply)201
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
C
Calling on the Bluetooth® phone .......... 192
By call history ................................................ 192
By contacts list.............................................. 193
By favorites list.............................................. 193
By keypad ....................................................... 194
Calling methods on the Bluetooth®
phone............................................................. 192
SOS ................................................................... 194
CD.......................................................................130
Overview ........................................................ 130
Sub menu .......................................................... 131
“Climate” button (Menu screen) ............... 16
Command list ................................................. 170
Command list overview .......................... 170
Command list ............................................... 170
Connected services..................................... 218
Connected service settings .....................229
Connected service settings screen .. 229
Displaying the connected service set-
tings screen................................................ 229
Connected services overview................. 218
Before using connected services ......220
Names and Operations of each part218
Connecting to internet via Wi-Fi®........... 51
Displaying the Wi-Fi® settings screen 51
Wi-Fi® function operating hints............54
Wi-Fi® settings screen .............................. 52
D
“Destination” button (Menu screen) 16, 64
Destination search.......................................... 79
Display and operation switches ................. 12
Names of each part....................................... 12
DVD ................................................................... 132
Overview .........................................................132
Sub menu ........................................................ 133