2018 Lexus LC500 ignition

141
4
-$@-$I@/BWJ@0.&@ &&

4-3. Media operation
Audio/visual system
SORY or IGNITION ON mode , the system automatically recon-nects the portable player.
●If the Bluetooth® device is disconnected
on purpose, such as it was turned off, this does not happen. Reconnect the porta-ble player manually.
●Bluetooth® device information is regis-
tered when the Bluetooth® device is
connected to the Bluetooth® audio sys-
tem. When selling or disposing of the
vehicle, remove the Bluetooth® audio
information from the system. ( P.59)
●In some situations, sound output via the
Bluetooth® audio system may be out of sync with the connected device or output intermittently.
To use the Bluetooth® audio system, it
is necessary to register a Bluetooth®
device with the system.
Registering an additional device
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Add New Device”.
5 For more information: P.44
Selecting a registered device
1 Select “Connect” on the sub menu.
2 Select the device to be connected.
WARNING
●Do not operate the player’s controls or
connect to the Bluetooth® audio sys-
tem while driving.
●Your audio unit is fitted with
Bluetooth® antennas. People with
implantable cardiac pacemakers, car- diac resynchronization therapy-pace-makers or implantable cardioverter
defibrillators should maintain a reason- able distance between themselves and
the Bluetooth® antennas. The radio waves may affect the operation of such devices.
●Before using Bluetooth® devices, users of any electrical medical device other than implantable cardiac pace-
makers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should con-
sult the manufacturer of the device for information about its operation under the influence of radio waves. Radio
waves could have unexpected effects on the operation of such medical devices.
NOTICE
●Do not leave your portable player in the vehicle. In particular, high tempera-tures inside the vehicle may damage
the portable player.
Connecting a Bluetooth®
device

169
5
-$@-$I@/BWJ@0.&@ &&

5-1. Speech command system operation
Speech command system
• The command is incorrect or unclear. Note that certain words, accents or speech patterns may be difficult for the
system to recognize. • There is excessive background noise, such as wind noise.
●This system may not operate immediately after the engine switch is
in ACCESSORY or IGNITION ON mode .
1 Press the talk switch.
 The speech command system is
activated.
 Pressing the talk switch while a
voice prompt is playing, will stop the
voice recognition prompt and
immediately play the start listening
tone.
 While in voice recognition mode,
pressing and holding the talk switch
for 1 or more seconds cancels voice
recognition mode.
2 After a beep sounds, say the
desired command or select the
desired command.
■Displaying the command list
screen
1 Say “More commands” or select
“More commands” on the speech
command main menu screen.
2 Say the desired command or select
the desired command.
3 Say the desired command or select
the desired command.
NOTICE
●Do not touch and put a sharp object to the microphone.It may cause failure.
Speech command system opera-
tion

177
6
-$@-$I@/BWJ@0.&@ &&

6-1. Lexus parking assist monitor
Peripheral monitoring system
The parking assist monitor screen will
be displayed if the shift position is
shifted to the “R” while the engine
switch is in IGNITION
ON mode .
Display mode switch screen button
Switches the guide line display mode.
Lexus parking assist-sensor
If an obstacle is detected while the Lexus
parking assist-sensor is on, a display is
shown in the top right corner of the screen.
Rear Crossing Traffic Alert*
When the rear radar detects vehicles or
obstacles approaching from the rear, a dis-
play is shown in the top right corner of the
screen.
●The display mode switch icon displayed on the screen indicates the next display mode if the switch were pushed. The icon
does not indicate the current mode.
*: If equipped
The parking assist monitor is canceled
when the shift position is shifted into
any position other than the “R”.
Use any of the following modes.
Estimated course line display mode
( P.178)
Estimated course lines are displayed
which move in accordance with the
operation of the steering wheel.
Parking assist guide line display
mode ( P.180)
The steering wheel return points (park-
ing assist guide lines) are displayed.
Screen display
Canceling Lexus parking assist
monitor
A
B
C
Using the system

214
-$@-$I@/BWJ@0.&@ &&

7-3. What to do if...
■Automatic Bluetooth® connec-
tion on this system is set to off.
Set automatic Bluetooth® connection
on this system to on when the engine
switch is in ACCES-
SORY or IGNITION ON mode mode>. ( P.49)
■Preferred device settings function
on this system is set to on.
Set preferred device settings function
on this system to off. ( P.49)
Set the desired cellular phone to the
highest automatic connection priority.
( P.50)
■Your vehicle is in a area.
Move to where no longer appears
on the display.
■The profile version of the con-
nected cellular phone may not be
compatible with transferring
phonebook data.
For a list of specific devices which
operation has been confirmed on this
system, check with your Lexus retailer
or Lexus authorized repairer, or any
reliable repairer.
■Automatic contact transfer func-
tion on this system is set to off.
Set automatic contact transfer function
on this system to on. ( P.206)
■Passcode has not been entered on
the cellular phone.
Enter the passcode on the cellular
phone if requested (default passcode:
1234).
■Transfer operation on the cellular
phone has not completed.
Complete transfer operation on the
cellular phone (approve transfer oper-
ation on the phone).
■Automatic contact transfer func-
tion on this system is set to on.
Set automatic contact transfer function
on this system to off. ( P.206)
■Message transfer is not enabled on
the cellular phone.
Enable message transfer on the cellu-
lar phone (approve message transfer
on the phone).
■Automatic transfer function on this
system is set to off.
Set automatic transfer function on this
When making/receiving a call
A call cannot be made/received.
When using the phonebook
Phonebook data cannot be trans-
ferred manually/automatically.
Phonebook data cannot be edited.
When using the Bluetooth® mes-
sage function
Messages cannot be viewed.

215
7
-$@-$I@/BWJ@0.&@ &&

7-3. What to do if...
Phone
system to on. (P.206)
■Notification of SMS/MMS/E-mail
reception on this system is set to
off.
Set notification of SMS/MMS/E-mail
reception on this system to on.
( P.205)
■Automatic message transfer func-
tion is not enabled on the cellular
phone.
Enable automatic transfer function on
the cellular phone.
■Connection confirmation display
on this system is set to on.
To turn off the display, set connection
confirmation display on this system to
off. ( P.50)
*: The engine switch is in
ACCESSORY or IGNITION ON
mode .
■The cellular phone is not close
enough to this system.
Bring the cellular phone closer to this
system.
■Radio interference has occurred.
Turn off Wi-Fi® devices or other
devices that may emit radio waves.
■The cellular phone is the most likely
cause of the symptom.
Turn the cellular phone off, remove and
reinstall the battery pack, and then
restart the cellular phone.
Enable the cellular phone’s Bluetooth®
connection.
Disable the Wi-Fi® connection of the
cellular phone.
Stop the cellular phone’s security soft-
ware and close all applications.
Before using an application installed on
the cellular phone, carefully check its
source and how its operation might
affect this system.
●For details, refer to the owner’s manual that came with the cellular phone.
New message notifications are not
displayed.
In other situations
The Bluetooth® connection status is
displayed at the top of the screen
each time the system is activated.*
Even though all conceivable mea-
sures have been taken, the symptom
status does not change.