2018 Lexus LC500 bluetooth

40
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
included with the Bluetooth® phone
or portable device for more details.
7 Register the Bluetooth® device
using your Bluetooth® device.
 A PIN code is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth® devices. Depending on
the type of Bluetooth® device being
connected, a message confirming
registration may be displayed on the
Bluetooth® device’s screen.
Respond and operate the
Bluetooth® device according to the
confirmation message.
8 Check that the following screen is
displayed, indicating pairing was
successful.
 The system is connecting to the reg-
istered device.
 At this stage, the Bluetooth® func-
tions are not yet available.
9 Check that “Connected” is dis-
played and registration is complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
●If a cellular phone does not operate prop-
erly after being connected, turn the cellu- lar phone off and on and then connect it again.
■Registering from phone
When registering from the navigation
system is failed, or the phone name
doesn’t appear on the registering
screen, you need to connect the
Bluetooth® phone manually.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Yes” to register the new
phone.
5 Press the button on the Remote
Touch to select “If you cannot find…”
on the bottom of the screen.

41
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
6Select “Register from phone”.
7 Register the Bluetooth® device
using your Bluetooth® device.
 A PIN code is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth® devices. Depending on
the type of Bluetooth® device being
connected, a message confirming
registration may be displayed on the
Bluetooth® device’s screen.
Respond and operate the
Bluetooth® device according to the
confirmation message.
8 Check that the following screen is
displayed, indicating pairing was
successful.
 The system is connecting to the reg-
istered device.
 At this stage, the Bluetooth® func-
tions are not yet available.
9 Check that “Connected” is dis-
played and registration is complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
●If a cellular phone does not operate prop-
erly after being connected, turn the cellu- lar phone off and on and then connect it again.
To use the Bluetooth® Audio, it is nec-
essary to register an audio player with
the system.
Once the player has been registered, it
is possible to use the Bluetooth®
Audio.
This operation cannot be performed
while driving.
For details about registering a
Bluetooth® device: P.44
1 Turn the Bluetooth® connection
setting of your audio player on.
 This function is not available when
the Bluetooth® connection setting
of your audio player is set to off.
Registering a Bluetooth® audio
player for th e first time

42
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
2Press the “MENU” button on the
Remote Touch.
3 Select “Media”.
4 Select “Source” on the sub menu.
5 Select “Bluetooth*”.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
6 Select “Yes” to register a audio
player.
7 Follow the steps in “Registering a
Bluetooth® phone for the first time”
from step 5. (P.39)
■Bluetooth® Core Specification
 Ver. 2.0 (Recommended: Ver. 4.1
+EDR)
■Profiles:
 HFP (Hands Free Profile) Ver. 1.0
(Recommended: Ver. 1.7)
• This is a profile to allow hands-free
phone calls using a cellular phone or
head set. It has outgoing and incoming
call functions.
 OPP (Object Push Profile) Ver. 1.1
(Recommended: Ver. 1.2)
• This is a profile to transfer contacts data.
 PBAP (Phone Book Access Profile)
Ver. 1.0 (Recommended: Ver. 1.2)
• This is a profile to transfer phonebook
data.
 MAP (Message Access Profile)
Recommended: Ver. 1.2
• This is a profile to use phone message
functions.
 PAN (Personal Area Networking)
Recommended: Ver. 1.0
• This is a profile to use the “Connected
services” function.
 A2DP (Advanced Audio Distribu-
tion Profile) Ver. 1.0 (Recom-
mended: Ver. 1.3)
• This is a profile to transmit stereo audio
or high quality sound to the audio sys-
tem.
 AVRCP (Audio/Video Remote
Control Profile) Ver. 1.0 (Recom-
mended: Ver. 1.6)
Profiles

43
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
• This is a profile to allow remote control
the A/V equipment.
●If your cellular phone does not support
HFP, registering the Bluetooth® phone or using OPP, PBAP, MAP or PAN pro-files individually will not be possible.
●If the connected Bluetooth® device ver-sion is older than recommended or
incompatible, the Bluetooth® device function may not work properly.
●Certification
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by
Panasonic Corporation is under license.
Other trademarks and trade names are
those of their respective owners.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select the desired item to be set.
Connecting a Bluetooth® device
( P.45)
Registering a Bluetooth® device
Setting Bluetooth® details
Displaying the Bluetooth® setup
screen
Bluetooth® setup screen
A
B

44
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
(P.44)
Deleting a Bluetooth® device
( P.44)
Editing the Bluetooth® device
information and system settings
( P.49)
Up to 5 Bluetooth® devices can be
registered.
Bluetooth® compatible phones (HFP)
and audio players (AVP) can be regis-
tered simultaneously.
This operation cannot be performed
while driving.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Add new device”.
When another Bluetooth® device is
connected
 To disconnect the Bluetooth®
device, select “Yes”.
When 5 Bluetooth® devices have
already been registered
 A registered device needs to be
replaced. Select “Yes”, and select
the device to be replaced.
5 Follow the steps in “Registering a
Bluetooth® phone for the first time”
from step 6. (P.39)
This operation cannot be performed
while driving.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Remove device”.
5 Select the desired device.
6 Select “Yes” when the confirmation
screen appears.
7 Check that a confirmation screen is
displayed when the operation is
complete.
●When deleting a Bluetooth® phone, the contact data will be deleted at the same
time.
Registering a Bluetooth® device
C
D
Deleting a Bluetooth® device

45
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
Up to 5 Bluetooth® devices (Phones
(HFP) and audio players (AVP)) can be
registered.
If more than 1 Bluetooth® device has
been registered, select which device to
connect to.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Registered device”.
5 Select the device to be connected.
: Phone
: Audio player
 The profile icon for a currently con-
nected device will be displayed in
color.
 Selecting a profile icon which is not
currently connected will switch the
connection to the function.
 If the desired Bluetooth® device is
not on the list, select “Add new
device” to register the device.
( P.44)
6 Select the desired connection.
7 Check that a confirmation screen is
displayed when the connection is
complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
●It may take time if the device connection
is carried out during Bluetooth® audio
playback.
●Depending on the type of Bluetooth® device being connected, it may be neces-sary to perform additional steps on the
device.
●When disconnecting a Bluetooth®
device, it is recommended to disconnect using the system.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Phone” on the sub menu.
Connecting a Bluetooth®
device
Connecting a Bluetooth® device
in a different way (from phone
setup screen)

46
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
4Select “Connect phone”.
5 Select the device to be connected.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Phone” on the sub menu.
4 Select “Connect phone”.
5 Select the device to be connected.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Select device” on the sub
menu.
4 Select the device to be connected.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Media”.
3 Select “Source” on the sub menu.
4 Select “Bluetooth*”.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
5 Select “Connect”.
6 Select the device to be connected.
■Auto connection mode
To turn auto connection mode on, set
“Bluetooth* power” to on. ( P.49)
Leave the Bluetooth® device in a loca-
tion where the connection can be
established.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
 When the engine switch switch> is in ACCESSORY or
IGNITION ON mode ,
the system searches for a nearby
registered device.
 The system will connect with the
registered device that was last con-
nected, if it is nearby. When auto-
matic connection priority is set to on
and there is more than one regis-
tered Bluetooth® phone available,
the system will automatically con-
nect to the Bluetooth® phone with
the highest priority. ( P.49)
Connecting a Bluetooth® device
in a different way (from phone
setup screen)
Connecting a Bluetooth® device
in a different way (from phone top
screen)
Connecting a Bluetooth® device
in a different way (from
Bluetooth® audio top screen)

47
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
■Connecting manually
When the auto connection has failed
or “Bluetooth* power” is turned off, it is
necessary to connect Bluetooth®
manually.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Follow the steps in “Connecting a
Bluetooth® device” from step 4.
( P.45)
■Reconnecting the Bluetooth®
phone
If a Bluetooth® phone is disconnected
due to poor reception from the
Bluetooth® network when the engine
switch is in ACCES-
SORY or IGNITION ON mode mode>, the system automatically
reconnects the Bluetooth® phone.
The Bluetooth® device’s information
can be displayed on the screen. The
displayed information can be edited.
This operation cannot be performed
while driving.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Registered device”.
5 Select the desired device to be
edited.
6 Select “Device info”.
Editing the Bluetooth® device
information