2018 Lexus GS450h high beam

3
1
8 7
6
5
4
3
2
GS450h_OM_OM30G62U_(U)
9
4-1. Before drivingDriving the vehicle ..................... 168
Cargo and luggage .................... 176
Vehicle load limits ....................... 179
Trailer towing ............................... 180
Dinghy towing ................................ 181
4-2. Driving procedures Power (ignition) switch............. 182
EV drive mode ..............................187
Hybrid transmission................... 189
Turn signal lever .......................... 195
Parking brake ................................196
Brake Hold .................................... 198
4-3. Operating the lights and wipers
Headlight switch ........................200
Automatic High Beam............. 203
Windshield wipers and washer ................................ 207 4-4. Refueling
Opening the fuel tank cap .......213
4-5. Using the driving support systems
Lexus Safety System+ ................ 217
PCS (Pre-Collision System) ......... 223
LKA (Lane-Keeping Assist) .......................................... 234
Dynamic radar cr uise control
with full-speed range............. 243
Cruise control ............................. 255
Driving mode select switch ... 258
BSM (Blind Spot Monitor) ............. 260
• The Blind Spot Monitor function .................................... 263
• The Rear Cross Traffic Alert function......................... 265
Driving assist systems .............. 268
4-6. Driving tips Hybrid vehicle driving tips ......274
Winter driving tips......................276
4Driving

18Pictorial index
GS450h_OM_OM30G62U_(U)
■Switches
VSC OFF switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 270
Heated steering wheel switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 302
Automatic High Beam switch
*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 203
Instrument panel light control swit ches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 91
Odometer/trip meter and trip meter reset button . . . . . . . . . . . . . . . . . . . P. 91
HUD (Head-up display) switches
*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 103
Brake hold switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 198
1
2
3
4
5
6
7

84
GS450h_OM_OM30G62U_(U)
2. Instrument cluster
*1: These lights turn on when the power switch is turned to ON mode to indicate that asystem check is being performed. They will turn off after the “READY” indicator turns
on. There may be a malfunction in a system if a light does not come on, or turn off.
Have the vehicle inspected by your Lexus dealer.
*2: These lights turn on when the power switch is turned to ON mode to indicate that a system check is being performe d. They will turn off after the hybrid system is on, or
after a few seconds. There ma y be a malfunction in a system if a light does not come
on, or turn off. Have the vehicl e inspected by your Lexus dealer.
*3:F SPORT models
*4: The light flashes or illuminate s to indicate a malfunction.
*5: The light flashes to indicate a malfunction.
The indicators inform the driver of the op erating state of the vehicle’s various sys-
tems.
(If equipped)
LKA warning light
( → P. 407)
Indicators
Turn signal indicator
(→ P. 195)*1
(If equipped)
Intuitive parking assist
indicator
(U.S.A.)
Headlight indicator
(→ P. 200)*2
(If equipped)
“AFS OFF” indicator
(→ P. 201)
(Canada)
Tail light indicator
(→ P. 200) *3, 4
Slip indicator ( →P. 270)
Headlight high beam
indicator ( →P. 200)
*2VSC OFF indicator
(→ P. 271)
(If equipped)
Automatic High Beam
indicator ( →P. 203)*2, 5
(If equipped)
PCS (Pre-Collision
System) warning light
(→ P. 226)
Cruise control indicator
( → P. 243, 255)
*6, 7
(If equipped)
BSM (Blind Spot Monitor)
outside rear view mirror
indicators ( →P. 260)

167
GS450h_OM_OM30G62U_(U)
4Driving
4-1. Before driving Driving the vehicle ...................... 168
Cargo and luggage .................... 176
Vehicle load limits ....................... 179
Trailer towing ................................180
Dinghy towing ............................... 181
4-2. Driving procedures Power (ignition) switch ............. 182
EV drive mode ............................. 187
Hybrid transmission ................... 189
Turn signal lever........................... 195
Parking brake ............................... 196
Brake Hold..................................... 198
4-3. Operating the lights and wipers
Headlight switch ........................ 200
Automatic High Beam ............ 203
Windshield wipers and washer.................................207 4-4. Refueling
Opening the fuel tank cap ...... 213
4-5. Using the driving support systems
Lexus Safety System+ ................ 217
PCS (Pre-Collision System) ......... 223
LKA (Lane-Keeping Assist) .......................................... 234
Dynamic radar cruise control with full-speed range ............. 243
Cruise control ............................. 255
Driving mode select switch ...258
BSM (Blind Spot Moni tor).............. 260
• The Blind Spot Monitor
function .................................... 263
• The Rear Cross Traffic Alert function ......................... 265
Driving assist systems .............. 268
4-6. Driving tips Hybrid vehicle driving tips ..... 274
Winter driving tips ..................... 276

200
GS450h_OM_OM30G62U_(U)
4-3. Operating the lights and wipers
Headlight switch
Turning the end of the lever turns on the lights as follows:With the headlights on, push the
lever away from you to turn on the
high beams.
Pull the lever toward you to the center
position to turn the high beams off.
Pull the lever toward you and release
it to flash the high beams once.
You can flash the high beams with the
headlights on or off.
The headlights can be operated manually or automatically.
Operating instructions
U.S.A. Canada
The side marker, parking, tail,
license plate, instrument panel
lights, and daytime running
lights (→P. 201) turn on.
The headlights and all lights
listed above (except daytime
running lights) turn on.
The headlights, daytime run-
ning lights (→ P. 201) and all
the lights listed above turn on
and off automatically.
(When the power switch is in
ON mode.)
Off
The daytime running lights
turn on. ( →P. 201)1
2
3
4
(U.S.A.)
(Canada)
Turning on the high beam headlights
1
2

203
GS450h_OM_OM30G62U_(U)4-3. Operating the lights and wipers
4
Driving
Automatic High Beam∗
Push the lever away from you with
the headlight switch in the or position.
Press the Automatic High Beam
switch.
The Automatic High Beam indicator will
come on when the headlights are turned
on automatically to indicate that the sys-
tem is active.
∗: If equipped
The Automatic High Beam uses an in-vehicle camera sensor to assess the
brightness of streetlights, the lights of vehicles ahead, etc., and automatically
turns the high beam on or off as necessary.
WARNING
■Limitations of the Automatic High Beam
Do not rely on the Automatic High Beam. Al ways drive safely, taking care to observe
your surroundings and turning the high be am on or off manually if necessary.
■To prevent incorrect operation of the Automatic High Beam system
Do not overload the vehicle.
Activating the Automatic High Beam system
1
2

204
GS450h_OM_OM30G62U_(U)
4-3. Operating the lights and wipers
■Switching to low beam
Pull the lever to the original position.
The Automatic High Beam indicator
will turn off.
Push the lever away from you to acti-
vate the Automatic High Beam sys-
tem again.
■Switching to high beam
Press the Automatic High Beam
switch.
The Automatic High Beam indicator
will turn off and the high beam indi-
cator will turn on.
Press the switch to activate the Auto-
matic High Beam system again.
Turning the high beam on/off manually

GS450h_OM_OM30G62U_(U)
2054-3. Operating the lights and wipers
4
Driving
■High beam automatic turning on or off conditions
●When all of the following conditions are fulfilled, the high beam will be automatically
turned on:
• Vehicle speed is above appr oximately 21 mph (34 km/h).
• The area ahead of the vehicle is dark.
• There are no vehicles ahead with headlights or tail lights turned on.
• There are few streetlights on the road ahead.
●If any of the following conditions are fulfilled , the high beam will be automatically turned
off:
• Vehicle speed drops below approximately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• Vehicles ahead have headlights or tail lights turned on.
• There are many streetlights on the road ahead.
■Camera sensor detection information
●The high beam may not be automatically turned off in the following situations:
• When oncoming vehicles suddenly appear from a curve
• When the vehicle is cut in front of by another vehicle
• When vehicles ahead are hidden from sight due to repeated curves, road dividers or roadside trees
• When vehicles ahead appear from the faraway lane on wide road
• When vehicles ahead have no lights
●The high beam may be turned off if a vehicle ahead that is using fog lights without using
the headlights is detected.
●House lights, street lights, red traffic sign als, and illuminated billboards or signs may
cause the high beam to switch to the low beams, or the low beams to remain on.
●The following factors may affect the amount of time taken to turn the high beam on or
off:
• The brightness of headlights, fog lights, and tail lights of vehicles ahead
• The movement and direction of vehicles ahead
• When vehicle ahead only has op erational lights on one side
• When vehicle ahead is a two-wheeled vehicle
• The condition of the road (gradient, cu rve, condition of the road surface etc.)
• The number of passengers and amount of luggage
●The high beam may be turned on or off when the driver does not expect it.
●Bicycles or similar objects may not be detected.