2018 Lexus ES300h maintenance

483
ES300h_OM_OM33D45U_(U)7-3. Do-it-yourself maintenance
7
Maintenance and care
Light bulbs
Check the wattage of the light bulb to be replaced. (
→P. 546)
→ P. 448
■Front
Front side marker light
Headlight high beam (halogen bulb)
Front turn signal light
You may replace the following bulbs by yo urself. The difficulty level of replace-
ment varies depending on the bulb. If necessary bulb replacement seems diffi-
cult to perform, contact your Lexus dealer.
For more information about replacing other light bulbs, contact your Lexus
dealer.
Preparing for light bulb replacement
Removing the engine compartment cover
Bulb locations
1
2
3

484
ES300h_OM_OM33D45U_(U)7-3. Do-it-yourself maintenance
■Rear
Back-up light
Rear turn signal light12

ES300h_OM_OM33D45U_(U)
4857-3. Do-it-yourself maintenance
7
Maintenance and care
■Headlight high beam (halogen bulb)Turn the cover counterclockwise
and remove it.
Unplug the connector while pull-
ing the lock release.
Turn the bulb base counterclock-
wise.
Replacing light bulbs
1
2
3

486
ES300h_OM_OM33D45U_(U)7-3. Do-it-yourself maintenance
Set the new light bulb.
Align the 3 tabs on the light bulb with
the mounting, and insert.
Turn it clockwise to set.
Set the connector.
Shake the bulb base gently to check
that it is not loose, turn the headlight
high beams on once and visually
confirm that no light is leaking
through the mounting.
Install the cover and turn it clock-
wise.
Align the
▲ of the cover to the posi-
tioning mark of the lamp body and
insert and turn it.
4
5
6

ES300h_OM_OM33D45U_(U)
4877-3. Do-it-yourself maintenance
7
Maintenance and care
■Front turn signal lightsTo allow enough working space,
turn the steering wheel to the
opposite side of the bulb to be
replaced.
Remove the 3 fender liner clips
and 1 screw.
While holding the clamp open,
pull and remove the tabs and
open the fender liner.
1
2

488
ES300h_OM_OM33D45U_(U)7-3. Do-it-yourself maintenance
Turn the bulb base counterclock-
wise.
Remove the light bulb.
When installing, reverse the steps
listed.
After installing the bulb base, reinstall
the fender liner and install the clips
and screw.
3
4
5

ES300h_OM_OM33D45U_(U)
4897-3. Do-it-yourself maintenance
7
Maintenance and care
■Front side marker lightsPartly remove the fender liner.
Perform the procedure for “Front turn signal lights” from step 1 to 2.
(→ P. 487)
Turn the bulb base counterclock-
wise.
Remove the light bulb.
When installing, reverse the steps
listed.
After installing the bulb base, reinstall
the fender liner and install the clips
and screw.
1
2
3
4

490
ES300h_OM_OM33D45U_(U)7-3. Do-it-yourself maintenance
■Rear turn signal lights
Open the trunk lid and remove
the cover.
Turn the bulb base counterclock-
wise.
Remove the light bulb.
When installing, reverse the steps listed.
1
2
3
4