2018 KIA STONIC height adjustment

To reinstall the headrest:1. Put the headrest poles (2) into the holes while pressing the release
button (1).
2. Recline the seatback (4) with the recline lever (3).
3. Adjust the headrest to the appro‐ priate height.
WARNING
Always make sure the headrestlocks into position after reinstallingand adjusting it properly.
Forward and backward adjustment
(if equipped)
The headrest may be adjusted forward
to 4 different positions by pulling the headrest forward to the desired de‐
tent. To adjust the headrest to it’s fur‐
thest backwards position, pull it fully forward to the farthest position and
release it. Adjust the headrest so that
it properly supports the head and neck.
WARNING
A gap between the seat and theheadrest release button may appearwhen seating on the seat or whenyou push or pull the seat. Be carefulnot to get your finger, etc. caught inthe gap.
Seatback pocket (if equipped)
The seatback pocket is provided on the
back of the front passenger’s seatback.
Safety features of your vehicle
3-08

WARNING
nSeatback pockets
Do not put heavy or sharp objects inthe seatback pockets. In an accidentthey could come loose from thepocket and injure vehicle occupants.
Rear seat adjustment
Headrest (if equipped)
The rear seat is equipped with headr‐
ests for the occupant's safety and comfort. The headrest not only provides comfort
for passengers, but also helps to pro‐
tect the head and neck in the event of
a collision.
WARNING
•For maximum effectiveness incase of an accident, the headrestshould be adjusted so the middleof the headrest is at the sameheight as the center of gravity ofan occupant's head. Generally, thecenter of gravity of most people'shead is similar with the height ofthe top of their eyes. Also adjustthe headrest as close to your headas possible. For this reason, theuse of a cushion that holds thebody away from the seatback isnot recommended.
•Do not operate the vehicle withthe headrests removed. Severe in‐jury to an occupant may occur inthe event of an accident. Headr‐ests may provide protectionagainst severe neck injuries whenproperly adjusted.
Adjusting the height up and down (ifequipped)
To raise the headrest, pull it up to the
desired position (1). To lower the head‐ rest, push and hold the release button
(2) on the headrest support and lower
the headrest to the desired position (3).

3-09
3
Safety features of your vehicle

Lap/shoulder belt
Height adjustment (front seat, if equip‐ped)
'SPOU
TFBU
You can adjust the height of the shoul‐
der belt anchor to one of the 3 posi‐ tions for maximum comfort and safety.
The height of the adjusting seat belt
should not be too close to your neck.
The shoulder portion should be adjus‐ ted so that it lies across your chest and
midway over your shoulder near the
door and not your neck.
To adjust the height of the seat belt anchor, lower or raise the height ad‐
juster into an appropriate position. To raise the height adjuster, pull it up
(1). To lower it, push it down (3) while pressing the height adjuster button (2).
Release the button to lock the anchor
into position. Try sliding the height ad‐
juster to make sure that it has locked into position.
WARNING
•Verify the shoulder belt anchor islocked into position at the appro‐priate height. Never position theshoulder belt across your neck orface. Improperly positioned seatbelts can cause serious injuries inan accident.
•Failure to replace seat belts afteran accident could leave you withdamaged seat belts that will notprovide protection in the event ofanother collision leading to person‐al injury or death. Replace yourseat belts after being in an acci‐dent as soon as possible.
To fasten your seat belt:
To fasten your seat belt, pull it out of
the retractor and insert the metal tab (1) into the buckle (2). There will be an
audible "click" when the tab locks into
the buckle.
The seat belt automatically adjusts to the proper length only after the lap
belt portion is adjusted manually so
that it fits snugly around your hips. If you lean forward in a slow, easy mo‐
tion, the belt will extend and let you
move around. If there is a sudden stop or impact, however, the belt will lock in‐
to position. It will also lock if you try to
lean forward too quickly.
Safety features of your vehicle
3-16