2018 KIA STONIC reset

(Continued)
•The fuel economy and distance to
empty may vary significantly
based on driving conditions, driving
habits, and condition of the vehi‐
cle.
Average Fuel Economy (2)
• The average fuel economy is calcula‐ ted by the total driving distance and
fuel consumption since the last aver‐ age fuel economy reset. - Fuel economy range: 0 ~ 99.9km/L, L/100 km or MPG
• The average fuel economy can be re‐ set both manually and automatically.
Manual reset
To clear the average fuel economy
manually, press the RESET (for Type A, B cluster), OK ( for Type C, D cluster)
(reset) on the steering wheel for more
than 1 second when the average fuel economy is displayed.
Automatic reset (for type C, D cluster)
To make the average fuel economy be
reset automatically whenever refueling,
select the L

- After Ignition : The average fueleconomy will reset automatically
whenever it has passed 4 hours after turning OFF the engine.
- After Refueling : The average fuel economy will reset automatically
when refueling.
•
Fuel Economy Unit
To select the fuel economy unit.
(km/L ↔ L/100km, UK gallon ↔ US
gallon)
•
Temperature Unit
To select the temperature unit. (°C, °F)
Language
Choose the language
Reset
You can reset the menus in the User
Settings Mode. All menus in the User Settings Mode are initialized, except
language and service interval.
Warning messages
Warning messages appear on the LCD
to warn the driver. It is located in the center of the instrument cluster.
The warning message may appear dif‐
ferently depending on the type of in‐
strument cluster and some may not show the warning message at all. The warning message is shown in ei‐
ther symbol, symbol and text, or text
type only.
Door, hood, tailgate open
• This warning is displayed indicating which door, or the hood, or the tail‐
gate is open.
Sunroof open(if equipped)
• This warning is displayed if you turn off the engine when the sunroof is
open.
Engine has overheated
• This warning message illuminates
when the engine coolant temperature
is above 120°C (248°F). This means
that the engine is overheated and may be damaged.
❈ If your vehicle is overheated, refer
to L

Temperature control
The temperature will increase to the
maximum (HI) by turning the knob to the right extremely.
The temperature will decrease to the
minimum (Lo) by turning the knob to
the left extremely.
When turning the knob, the tempera‐ ture will increase or decrease by 0.5°C/
1°F. When set to the lowest tempera‐
ture setting, the air conditioning will operate continuously.
Temperature conversion
You can switch the temperature mode
between Centigrade to Fahrenheit as
follows: While pressing the OFF button, press
the AUTO button for 4 seconds or
more.
The display will change from Centi‐
grade to Fahrenheit, or from Fahrenheitto Centigrade.
If the battery has been discharged or disconnected, the temperature mode
display will reset to Centigrade.
Air intake control
This is used to select the outside
(fresh) air position or recirculated air position.
To change the air intake control posi‐
tion, press the control button.
Recirculated air position
With the recirculated air position selected, airfrom the passenger
compartment will bedrawn through the heat‐ing system and heated
or cooled according tothe function selected.
Outside (fresh) air position
With the outside (fresh) air position selected, air
enters the vehicle fromoutside and is heated or
cooled according to thefunction selected.
NOTICE
Prolonged operation of the heater in
the recirculated air position (without
air conditioning selected) may cause
fogging of the windshield and side
windows and the air within the pas‐
(Continued)
Features of your vehicle
4-112

1. Turn the ignition switch to the ONposition.
2. Turn the mode selection knob to the defrost position (
).
3. Push the air intake control button at least 5 times within 3 seconds.
The indicator light in the air intake con‐
trol button will blink 3 times. It indi‐ cates that the defogging logic is can‐
celed or returned to the programmed
status.
If the battery has been discharged or disconnected, it resets to the defog
logic status.
Automatic climate control system
(if equipped)
1. Turn the ignition switch to the ON position.
2. Select the defrost position pressing defrost button (
).
3. While holding the air conditioning button (A/C) pressed, press the air
intake control button at least 5
times within 3 seconds.
The A/C display blinks 3 times. It indi‐ cates that the defogging logic is can‐
celed or returned to the programmed
status.
If the battery has been discharged or disconnected, it is reset to the defog
logic status.
Auto defogging system (Only for
automatic climate control system,
if equipped)
Auto defogging reduces the possibility
of fogging up the inside of the wind‐ shield by automatically sensing the
moisture of inside the windshield and
air flow toward the windshield can in‐ crease.
The auto defogging system operates
when the AUTO mode is on.
For Europe
If your vehicle is equipped with the auto
defogging system, it is automatically
activated when the conditions are met.
Features of your vehicle
4-120

The Lane Departure Warning (LDW) System
does not operate when:....................................................... 6-64
The Lane Departure Warning (LDW) System
may not warn you even if the vehicle leaves the
lane, or may warn you even if the vehicle does
not leave the lane when:......................................................6-64
Driver Attention Warning (DAW) system (if equipped) ..... 6-66
System setting and activation............................................6-66
Resetting the system.......................................................... 6-67
System standby.................................................................... 6-67
System malfunction............................................................. 6-68
Blind-Spot Collision Warning (BCW) ...................................... 6-70 BCW (Blind-Spot Collision Warning) / LCA (Lane
Change Assist)....................................................................... 6-71
Rear Cross-Traffic Collision Warning................................. 6-73
Driver's attention.................................................................. 6-75
Economical operation............................................................... 6-76
Special driving conditions......................................................... 6-78 Hazardous driving conditions.............................................. 6-78
Rocking the vehicle............................................................... 6-78
Smooth cornering................................................................. 6-79
Driving at night...................................................................... 6-79
Driving in the rain.................................................................. 6-80
Driving in flooded areas....................................................... 6-80
Driving off-road.................................................................... 6-81
Highway driving..................................................................... 6-81
Winter driving............................................................................ 6-82 Snowy or icy conditions....................................................... 6-82
Use high quality ethylene glycol coolant...........................6-84
Check battery and cables.................................................... 6-84 Change to "winter weight" oil if necessary...................... 6-84
Check spark plugs and ignition system............................. 6-84
To keep locks from freezing................................................ 6-85
Use approved window washer anti-freeze in system.... 6-85
Don't let your parking brake freeze...................................6-85
Don't let ice and snow accumulate underneath.............. 6-85
Carry emergency equipment.............................................. 6-85
Trailer towing (for Europe)...................................................... 6-86 Hitches.................................................................................... 6-87
Safety chains......................................................................... 6-87
Trailer brakes......................................................................... 6-88
Driving with a trailer............................................................. 6-88
Maintenance when trailer towing...................................... 6-91
If you do decide to pull a trailer.......................................... 6-91
Vehicle weight............................................................................ 6-94 Base curb weight.................................................................. 6-94
Vehicle curb weight...............................................................6-94
Cargo weight.......................................................................... 6-94
GAW (Gross axle weight)..................................................... 6-94
GAWR (Gross axle weight rating)....................................... 6-94
GVW (Gross vehicle weight)................................................ 6-94
GVWR (Gross vehicle weight rating).................................. 6-94
Overloading............................................................................ 6-94


6

¥
5ZQF
$
• Depress the brake pedal.
• Depress the clutch pedal if equippedwith a manual transaxle.
• Shift into N (Neutral) if equipped with an automatic transaxle.
• Press the O/CANCEL switch located on the steering wheel.
• Decrease the vehicle speed lower than the memory speed by 20 km/h
(12 mph).
• Decrease the vehicle speed to less than approximately 30 km/h (20
mph).
Each of these actions will cancel cruise
control operation (the cruise set indica‐tor light will go off), but it will not turn the system off. If you wish to resume cruise control operation, move up thelever (to RES+) located on your steering wheel. You will return to your previous‐ly preset speed.To resume cruising speed at
more than approximately 30
km/h (20 mph):
¥
5ZQF
"
¥
5ZQF
#
Driving your vehicle
6-48

SPEED LIMIT CONTROL SYSTEM (IF EQUIPPED)
You can set the speed limit when you
do not want to drive over a specific
speed.
If you drive over the preset speed limit, the warning system operates (set
speed limit will blink and chime will
sound) until the vehicle speed returns within the speed limit.
NOTICE
While speed limit control is in opera‐
tion, the cruise control system can‐
not be activated.
Speed limit control switch
O: Cancels set speed limit.
: Turns speed limit control sys‐ tem on or off.
RES+ : Resumes or increases speed
limit control speed.
SET- : Sets or decreases speed limit
control speed.
To set speed limit:
1. Press the speed limit button
twice on the steering wheel, to
turn the system on.
The speed limit indicator light will
illuminate.
2. Move the lever down (to SET-).
Driving your vehicle
6-50

3. Move the lever up (to RES+) ordown (to SET-), and release it at
the desired speed. Move the lever
up (to RES+) or down (to SET-) and
hold it. The speed will increase or
decrease by 5 km/h (3 mph).
The set speed limit will be displayed.
To drive over the preset speed limit you
must depress hard on the accelerator pedal (more than approximately 80%)
until the kick down mechanism works
with a clicking noise. Then the set speed limit will blink and chime will
sound until you return the vehicle
speed within the speed limit.
NOTICE
•Depressing the accelerator pedal
less than approximately 50%, the
vehicle will not speed over the pre‐
set speed limit but maintain the
vehicle speed within the speed lim‐
it.
•A clicking noise heard from the
kick down mechanism by depress‐
ing the accelerator pedal fully is a
normal condition.
To turn off the speed limit
control, do one of the following:

6-51
6
Driving your vehicle