DRIVER'S PANEL
*IF EQUIPPED 11ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS .
Hill-Start Assist Control (HAC)
Autonomous Emergency Braking (AEB) / Forward Collision Warning (FCW)*
Power Liftgate Release Button*
HAC helps prevent the vehicle from rolling backward when accelerating from a
stop while on a steep incline .
The HAC automatically activates whether the ESC is OFF or ON but does NOT
activate when the ESC has malfunctioned .
REMINDER: The HAC does not operate when the gear shift is in the P (Park) or the N (Neutral) position .
The FCWS helps to alert the driver when rapidly approaching
a vehicle that is slowing down, braking or stopped . A warning
message will appear on the LCD screen and a chime will sound .
The FCWS will become active when the vehicle is traveling more
than 25 mph . The AEB will become active when the vehicle is
traveling more than 6 mph .
To turn the FCWS off, go to User Settings in the LCD Instrument Cluster modes .
REMINDERS:
•
The FCWS and AEB will be activated by default when vehicle power is cycled on, even when previous setting is off
•The FCWS will not operate when the vehicle is traveling more than approximately 50 mph
The Forward Collision Warning System (FCWS) and Autonomous Emergency Braking (AEB) are not substitutes for safe and proper driving. Always drive safely and use caution. FCWS may not always alert the driver when the vehicle is approaching another vehicle.
Press the A button for approximately one second to open
the liftgate .
A
(Buttons located on left of Steering Wheel)
•
•When HAC is active (e .g ., during initial acceleration from a stop on an incline), you may notice that the brakes will momentarily remain engaged after you depress the accelerator – this is normal operation .
•HAC provides a 2-second delay before the vehicle may start rolling backward
QUICK TIPS
