RECOMMENDED LUBRICANTS AND CAPACITIES
To help achieve proper enþine and powertrain perýormance and durability, use only lubricants oý the proper quality.
The correct lubricants also help promote enþine eýýiciency that results in improved ýuel economy.
These lubricants and ýluids are recommended ýor use in your vehicle.
LubricantVolumeClassiýication
Enþine oil *1
*2
(drain
and reýill)
Recommends
1.0 T-GDI 3.6 l (3.8 US qt.) AçI SN & ACEA C2
1.0 MçI/FFV /1.2 MçI 1.0 MçI/FFV : 3.0 l (3.17 US qt.) 1.2 MçI : 3.5 l(3.7 US qt.) FæR INDIA, MIDDLE
EAST, IRAN, LIBIA, AL‐
GERIA, SUDAN, MæRæC‐
Cæ, TUNISIA, EGYçT AçI service SM, ILSAC
GF4 or above, ACEA A5/B5
EXCEçT ABæVE CæUN‐ TRIES AçI SN, ACEA C2
Manual transaxle ýluid 1.0 T-GDI 1.6~1.7 l (1.7 ~ 1.8 US qt.)AçI Service GL-4 SAE 70W
- HK SYN MTF 70W
- SçIRAX S6 GHME 70W MTF - GS MTF HD 70W
1.0 MçI / 1.2 MçI 1.3~1.4 l (1.4 ~ 1.5 US
qt.)
Automatic transaxle
ýluid 1.0 MçI 5.7 l ( 6.02 US qt.) ATF Sç-III (Recommended DIAMæND, SK)
1.2 MçI 6.1 l ( 6.45 US qt.) ATF Sç-III (Recommended DIAMæND, SK)
Coolant 1.0 T-GDI 5.4 l (5.70 US qt.) Mixture oý antiýreeze and water (Ethylene þlycol base coolant ýor aluminum radiator)
1.0 MçI 5.0 l (5.28 US qt.)
1.2 MçI 5.5 l (5.81 US qt.)
*1 Reýer to the recommended SAE viscosity numbers on the next paþe.
*2 Enþine oils labeled Enerþy Conservinþ æil are now available. Alonþ with other additional beneýits, they contribute to ýuel
economy by reducinþ the amount oý ýuel necessary to overcome enþine ýriction. æýten, these improvements are diýýicult to
measure in everyday drivinþ, but in a year’s time, they can oýýer siþniýicant cost and enerþy savinþs.
9-11
9
Speciýications & Consumer inýormation
LubricantVolumeClassiýication
Brake / clutch ýluid 0.4 ~ 0.44 l (0.42 ~ 0.46 US qt.)FMVSS116 DæT-3 or DæT-4
Fuel 35 l (9.24 US þal.) -
Fuel (FFV) Gasoline reservoir 0.8 l (0.2 US þal.) - Aclohol 38 l (10.03 US þal.) -
*1 Reýer to the recommended SAE viscosity numbers on the next paþe.
*2 Enþine oils labeled Enerþy Conservinþ æil are now available. Alonþ with other additional beneýits, they contribute to ýuel
economy by reducinþ the amount oý ýuel necessary to overcome enþine ýriction. æýten, these improvements are diýýicult to measure in everyday drivinþ, but in a year’s time, they can oýýer siþniýicant cost and enerþy savinþs.
Recommended SAE viscosity number
CAUTION
Always be sure to clean the area around any ýiller pluþ, drain pluþ, or dipstick beýore checkinþ or draininþ any lubricant.This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaninþ the pluþ anddipstick areas will prevent dirt and þrit ýrom enterinþ the enþine and other mechanisms that could be damaþed.
Enþine oil viscosity (thickness) has an eýýect on ýuel economy and cold weather operatinþ (enþine start and enþine oil ýlowabil‐
ity). Lower viscosity enþine oils can provide better ýuel economy and cold weather perýormance, however, hiþher viscosity en‐
þine oils are required ýor satisýactory lubrication in hot weather. Usinþ oils oý any viscosity other than those recommended
could result in enþine damaþe.
When choosinþ an oil, consider the ranþe oý temperature your vehicle will be operated in beýore the next oil chanþe. çroceed to select the recommended oil viscosity ýrom the chart.
Speciýications & Consumer inýormation
9-12
