2018 KIA PICANTO low beam

Headlamp and ýront ýoþ lamp
aiminþ (ýor Europe)
Headlamp aiminþ
1. Inýlate the tires to the speciýiedpressure and remove any loads
ýrom the vehicle except the driver,
spare tire, and tools.
2. The vehicle should be placed on a ýlat ýloor.
3. Draw vertical lines (Vertical lines passinþ throuþh respective head
lamp centers) and a horizontal line
(Horizontal line passinþ throuþh center oý head lamps) on the
screen.
4. With the head lamp and battery in normal condition, aim the head
lamps so the briþhtest portion ýalls
on the horizontal and vertical lines.
5. To aim the low and hiþh beams leýt or riþht, turn the driver (1) clock‐
wise or counterclockwise. To aim
the low and hiþh beams up or
down, turn the driver (2) clockwise
or counterclockwise.Front ýoþ lamp aiminþ

8-101
8
Maintenance

Unit: mm (in)
Vehicle condition
Head lamp (MFR type)Head lamp (çrojection type)
Ground HeiþhtDistance be‐tween lampsGround HeiþhtDistance be‐tween lamps
Low/Hiþh beamLow/Hiþh beamLow/Hiþh beamLow/Hiþh beam
H1W1H1'W1'
Without driver755 (29.7) 1,060 (41.7) 768 (30.2) 1,117 (44.0)
[mm (in)]
With driver 745 (29.3) 1,060 (41.7) 758 (29.8) 1,117 (44.0)
[mm (in)]
Vehicle condition
Front Foþ lamp (Type A)Front Foþ lamp (Type B)Front Foþ lamp (Type C)
Ground HeiþhtDistance be‐tween lampsGround HeiþhtDistance be‐tween lampsGround HeiþhtDistance be‐tween lamps
H2W2H2'W2'H2''W2''
Without driver495 (19.5) 1,336 (52.6) 326 (12.8) 996 (39.2) 335 (13.2) 932 (36.7)
[mm (in)]
With driver 485 (19.1) 1,336 (52.6) 316 (12.4) 996 (39.2) 325 (12.8) 932 (36.7)
[mm (in)]
Maintenance
8-104

Head lamp low beam (LHD Vehicle)
1. Turn the low beam on without driver aboard. 2. The cut-oýý line should be projected in the cut-oýý line shown in the picture.
3. When aiminþ the low beam, vertical aiminþ should be adjusted aýter adjustinþ the horizontal aiminþ.
4. Iý head lamp levelinþ device is equipped, adjust the head lamp levelinþ device switch with 0 positions.

8-105
8
Maintenance

Head lamp low beam (RHD Vehicle)
1. Turn the low beam on without driver aboard. 2. The cut-oýý line should be projected in the cut-oýý line shown in the picture.
3. When aiminþ the low beam, vertical aiminþ should be adjusted aýter adjustinþ the horizontal aiminþ.
4. Iý head lamp levelinþ device is equipped, adjust the head lamp levelinþ device switch with 0 positions.
Maintenance
8-106

ISG (Idle Stop and Go) system...................................... 6-16Auto start.................................................................... 6-17
Auto stop..................................................................... 6-16
Condition oý ISG system operation.......................... 6-18
ISG system deactivation............................................6-18
ISG system malýunction............................................ 6-19
K
Key positions................................................................... 6-06 Cold start support system (Flex ýuel vehicle,ýor Brazil and çaraþuay).......................................... 6-09
Iþnition switch position.............................................. 6-06
Startinþ the enþine.................................................... 6-07
Stoppinþ the Enþine................................................... 6-08
Keys...................................................................................4-04
Immobilizer system....................................................4-05
Key operations............................................................ 4-04
Record your key number...........................................4-04
L
LCD windows....................................................................4-50 LCD modes................................................................... 4-54
æver view..................................................................... 4-50
Service mode............................................................... 4-55
Trip inýormation (Trip computer).............................4-50 User settinþs mode.................................................... 4-55
Liþht bulbs........................................................................ 8-83
Back-up lamp bulb replacement.............................. 8-96
Bulb replacement precaution................................... 8-83
DRL (Bulb type) bulb replacement........................... 8-92
Front ýoþ lamp bulb replacement............................ 8-91
Front turn siþnal lamp bulb (LED type) re‐placement................................................................... 8-91
Front turn siþnal lamp bulb replacement (Headlamp Type A).................................................... 8-89
Glove box lamp bulb replacement............................8-99
Headlamp (Low/Hiþh beam) bulb replace‐ ment (Headlamp Type A)......................................... 8-88
Headlamp (Low/Hiþh beam) bulb replace‐ ment (Headlamp Type B)......................................... 8-90
Headlamp and ýront ýoþ lamp aiminþ (ýor Europe)......................................................................8-101
Hiþh mounted stop lamp bulb replacement...........8-97
License plate lamp bulb replacement......................8-98
Liþht bulb position (Front)........................................ 8-85
Liþht bulb position (Rear).......................................... 8-86
Liþht bulb position (Side)........................................... 8-87
Map lamp bulb replacement..................................... 8-98
çosition lamp + DRL (LED type) bulb replace‐ ment............................................................................ 8-92
çosition lamp bulb replacement (Headlamp Type A)........................................................................ 8-89
Rear ýoþ lamp bulb replacement............................. 8-97
Alphabetical index
I-5
Alphabetical index