2018 INFINITI QX60 steering

WARNING
The parking guide may not function prop-
erly under the below operations and
environments:– Sudden acceleration, sudden braking, sudden turn of the steering wheel or
sudden shift of the shift lever
– On non-level, paved surfaces such as hills or bumpy or stepped roads
– When the vehicle slips, such as on a snowy road
– When tire chains are equipped
– When the image and the actual road differ
– When vehicle is continuously moving at an extremely low speed
– When the wheels are misaligned
When the vehicle deviates from the parking
frame while following the parking procedure,
check that the surroundings are safe and ad-
just the position. The parking guide terminates under the fol-
lowing conditions:
∙ When the vehicle speed is above 10 km/h (6 mph).
∙ When the parking procedure is not fol- lowed according to the guide
∙ When “End” is selected
4-12Monitor, climate, audio, phone and voice recognition systems

Parking guidance screen
1Starting position frame for backing
up/position switch frame
Indicates the starting position for back-
ing up. Starting position frame will
change color when steering wheel is
turned. Position switch frame is shown in
green.
2Target parking frame (blue)
Indicates the target parking position.
3Target predicted course lines (green)
Indicates the predicted course needed to
park into the target parking position.
4Clearance guidelines (red)
Indicates the approximate clearance re-
quired for parking.
5“End” key
Terminates the parking guidance.
6“View Change” key
Toggles the left side of the screen be-
tween the bird’s-eye view, front-side
view, front-wide view and rear-wide
view.
7“Replay” key
Replays the voice guidance.
8Direction indicator icon
Indicates the direction of the view on the
driver’s side part of the screen.
: Rear-view is displayed.
: Front-view is displayed.
9Predicted course lines (orange)
Indicates the predicted course when op-
erating the vehicle.
10“Hint” key
When this key is selected several screens
will be available to aid in the operation of
the Park Guidance System.
LHA4346
Monitor, climate, audio, phone and voice recognition systems4-13

7. While the vehicle is stationary, turn thesteering wheel until the starting position
frame turns green and then begin to
move forward into the starting position
frame
2.
8. Keep the steering wheel in its current position and move the vehicle slowly
forward. A chime will sound when the
vehicle fits into the frame.
9. Stop the vehicle and place the shift leverin the R (Reverse) position. 10. Predicted course lines (orange)
1and
target predicted course lines (green)
2
will be displayed on the screen. While the
vehicle is stationary, turn the steering
wheel until the predicted course lines
(orange) and target predicted course
lines (green) are overlapping. A chime
will sound when the two lines overlap.
LHA4333LHA4334
Monitor, climate, audio, phone and voice recognition systems4-15

11. Keep the steering wheel in its currentposition and move the vehicle slowly
backward toward the orange frame. A
chime will sound when the vehicle fits
into the frame. You can adjust the target
parking frame by turning the steering
wheel left or right during backing up.
12. Align the steering wheel and move the vehicle slowly backward toward the tar-
get parking frame.
13. Stop the vehicle.Example of parallel parking
(left side)
Stop the vehicle at approximately1mtothe
side of the target parking position and begin
the parking procedure. 1. Press the CAMERA button to display the bird’s-eye view.
2. Select “Park Guide”.
3. Select "Parallel (L)”. 4. The parking position adjustment screen
will be displayed, showing the clearance
guidelines in red1and the target park-
ing frame in blue
2.
5. Adjust the target parking frame (blue) so that the clearance guidelines (red) do not
overlap with obstacles and set the park-
ing position. Use the up, down, left and
right keys on the screen
3to move the
target parking frame (blue). Use the
clockwise and counterclockwise keys on
the screen
4to rotate the target park-
ing frame (blue).
LHA4335LHA4330LHA4336
4-16Monitor, climate, audio, phone and voice recognition systems

6. If the target parking space is narrow,select “Narrow Mode”
5. In this mode,
the target parking frame will turn yellow
and the space between the target park-
ing frame and the clearance guidelines
will become narrower. In this mode,
switching will be required. Select “Start”.
7. The starting position frame for backingup will be displayed in green
1. The
starting position frame is displayed in the
bird’s-eye view.
∙ A green frame indicates the recom- mended position.
∙ A yellow frame indicates that switch- ing will be required.
∙ A red frame indicates that parking is not possible. 8. While the vehicle is stationary, turn the
steering wheel until the starting position
frame turns green and then begin to
move forward into the starting position
frame
2.
9. Keep the steering wheel in its current position and move the vehicle slowly for-
ward. A chime will sound when the ve-
hicle fits into the frame.
LHA4337
Monitor, climate, audio, phone and voice recognition systems4-17

10. Stop the vehicle and place the shift leverin the R (Reverse) position. 11. Predicted course lines (orange)1and
target predicted course lines (green)
2
will be displayed on the screen. While the
vehicle is stationary, turn the steering
wheel until the predicted course lines (or-
ange) and target predicted course lines
(green) are overlapping. A chime will
sound when the two lines overlap. 12. Keep the steering wheel in its current
position and move the vehicle slowly
backward toward the position switch
frame
1(green). A chime will sound
when the vehicle fits into the orange
frame.
13. Stop the vehicle. Predicted course lines (orange) and target predicted course
lines (green) are displayed.
LHA4338LHA4339LHA4340
4-18Monitor, climate, audio, phone and voice recognition systems

14. When the vehicle is stationary, turn thesteering wheel until the predicted course
lines (orange) and target predicted
course lines (green)
1are overlapping. A
chime will sound when the two lines
overlap.
15. Back the vehicle up to the target parking frame (blue)
2.
16. Keep the steering wheel position in its current position and move the vehicle
slowly backward toward the blue frame.
A chime will sound when the vehicle fits
into the orange frame.
17. Stop the vehicle.
AROUND VIEW® MONITOR
SETTINGS
To set up the Around View® Monitor to your
preferred settings, press the SETTING but-
ton, select the “Camera/Sonar” key. For ad-
ditional information about the Sonar, refer to
“Camera aiding parking sensor (sonar)” in this
section. For information about the Display
screen adjustment, refer to “Adjusting the
screen” in this section.
Predicted Course Lines:
When this item is turned to ON, the predicted
course lines are displayed in the front view,
rear view and bird’s-eye view. Camera View Priority:
The view shown on the screen at the begin-
ning of the Around View® Monitor operation
can be selected in order of priority.
Non-viewable Area Reminder:
With this item turned to ON, the non-
viewable area is highlighted in yellow for
seven seconds after the bird’s-eye view is
displayed. It will only be shown the first time
after the ignition switch is placed in the ON
position.
LHA4341LHA4265LHA4266
Monitor, climate, audio, phone and voice recognition systems4-19

Start the engine and operate the controls to
activate the air conditioner.
NOTE:∙ Odors from inside and outside the vehicle can build up in the air conditioner unit.
Odor can enter the passenger compart-
ment through the vents.
∙ When parking, set the heater and air con- ditioner controls to turn off air recircula-
tion to allow fresh air into the passenger
compartment. This should help reduce
odors inside the vehicle.
AUTOMATIC OPERATION
Cooling and/or dehumidified
heating (AUTO)
This mode may be used all year round as the
system automatically works to keep a con-
stant temperature. Air flow distribution, in-
take air control and fan speed are also con-
trolled automatically.
1. Press the AUTO button on. (The indica- tor on the button will illuminate and
AUTO will be displayed.) 2. Operate the driver’s side temperature
control buttons.
∙ Adjust the temperature display to about 24°C (75°F) for normal operation.
∙ The temperature of the passenger com- partment will be maintained automati-
cally. Air flow distribution, intake air con-
trol and fan speed are also controlled
automatically.
∙ A visible mist may be seen coming from the ventilators in hot, humid conditions as
the air is cooled rapidly. This does not
indicate a malfunction.
Dehumidified defogging
1. Press thefront defogger button
on. (The indicator light on the button will
come on.)
2. Operate the temperature control but- tons to set the desired temperature.
∙ To quickly remove ice from the outside of the windows, use the
fan speed
control buttons to set the fan speed to
maximum. ∙ As soon as possible after the windshield
is clean, press the AUTO button to return
to the automatic mode.
∙ When the
front defogger button is
pressed, the air conditioner will automatically
be turned on at outside temperatures above
2°C (36°F). The air recirculate mode auto-
matically turns off, allowing outside air to be
drawn into the passenger compartment to
further improve the defogging performance.
Remote Engine Start with
Intelligent Climate Control
(if so equipped)
Vehicles equipped with automatic climate
controls and Remote Engine Start function
may go into automatic heating or cooling
mode when Remote Engine Start is activated
depending on outside and cabin tempera-
tures. During this period, the climate control
display and buttons will be inoperable until
the ignition switch is turned on. In Remote
Engine Start defogging mode, the rear win-
dow defogger and heated steering wheel (if
so equipped) may be activated automatically.
4-34Monitor, climate, audio, phone and voice recognition systems