2018 INFINITI QX30 key

•[Direct Tune]
Touch to display the keypad to enter the
frequency and directly tune to the channel.
See "Radio operation" earlier in this section
•[Scan]
Touch to scan tune the channels.
See "Radio operation" earlier in this section
•[Instant Replay]
Up to 30 minutes of the broadcast of the
channel that has been tuned in to can be
replayed.
Touch to select from
,,,,
and
•[Tag]
Touch to register the tag information for
iTunes Tagging. If an iPod is plugged in
after the registration, the tag information
can be stored in an iPod and be use to
purchase the songs via iTunes.
•[Other]-[Favorite Artists]
Touch to set a favorite artists alert notifi-
cation. Up to 8 artists can be registered.
While a song of your favorite artist is play-
ing, touch the list and touch [Add]/
[Update]. To receive the alert notification,
select [Turn ALL Alerts ON].
•[Other]-[Favorite Songs]
Touch to set a favorite songs alert notifi-
cation. Up to 8 songs can be registered.
While a song of your favorite artist is play-
ing, touch the list and touch [Add]/
[Update]. To receive the alert notification,
select [Turn ALL Alerts ON].
•[Other]-[Customize Channel List]
Touch to customize the channel list. Only
the selected channels will be tuned in to
when you seek or scan the channels. You
can select each item or [Select All]/
[Deselect All].
•[Other]-[Favorite Artists Now Playing]
Touch to display the artist list for an alert
notice.
•[Other]-[Favorite Songs Now Playing]
Touch to display the song list for an alert
notice.
•[Other]-[Favorite Alert Settings]
Touch to turn on/off the alert notice for
the registered favorite artists and songs.
•[Other]-[Channel Locking Settings]
Touch to select or unselect the channel
that you wish to lock out. A passcode is
required to change the settings. The de-
fault passcode is 1234.
4-70Display screen, heater and air conditioner, and audio system

PHONE
Connecting Bluetooth®
Hands-Free Phone
The cellular phone must be connected to the
Bluetooth® Hands-Free Phone System be-
fore commencing operation. Up to 5 cellular
phones can be connected to the system.
See "Connecting Bluetooth® device" later in
this section
Phone selection
Select one of the connected devices for op-
eration.
1. Push

Available itemAction
[To] [Keypad] Type in the address of the recipient using the keypad. Touch
[OK] to confirm the address.
[Phonebook] Select a recipient from the phonebook and touch [OK] to confirm.
[Template] Select from list Select an item from the message list. The selected text will be added to the message to be sent.
[Edit Text Message
Replies] Select an item in the message list to be edited. Use the keypad
to edit the text and touch [OK] to complete editing.
[Send] Touch to send the message.PHONE AND TEXT MESSAGE
SETTINGS
Phone settings
The Bluetooth® Hands-Free Phone System
can be set in detail according to the user's
preference.
1. Push

BLUETOOTH® INFORMATION
Information about the connected
Bluetooth® device can be viewed.
1. Push

Setting itemResult
[Navigation]* Display the Navigation setting screen.
Refer to the Navigation Owner's Manual for details.
[Audio] Display the Audio settings screen.
See "Audio settings" earlier in this section
[Screen] Set the screen display to the preferred settings.
See "Screen settings" earlier in this section
[Volume Adjustment] Set the volume for each item. See "Volume settings" earlier in this section
[Clock] Set the Clock to your preferred settings.
See "Clock settings" earlier in this section
[InTouch Services] Set INFINITI InTouch
TMServices.
Refer to the Navigation Owner's Manual for details.
[Voice recognition] Set Minimize Voice Feedback to on/off and the audio setting for voice
recognition use.
[Camera/Sonar] Set the camera and parking sensor (sonar) to the preferred settings.
See "Around View Monitor setting" earlier in this section
[Other] [Language] Set the language to the preferred settings.
See "Language settings" earlier in this section
[Keyboard Type] Set the Keyboard Type to [QWERTY] or [ABC].
[Low on Fuel Alert] Set the fuel low notification to on/off.
[Software information] Display the software information.
* : Models with navigation system.
NOTE
•The displayed items vary depending on the vehicle model and equipped options.•The order of displayed items can be sorted.
Display screen, heater and air conditioner, and audio system4-123

5 Starting and driving
Precautions when starting and driving.........5-4
Exhaust gas (carbon monoxide) ...........5-4
Three-way catalyst (if equipped) ..........5-4
Tire Pressure Monitoring System (TPMS) .....5-5
On pavement and off-road driving
precautions ...................... .5-10
Avoiding collision and rollover ...........5-10
Off-road recovery .................. .5-11
Rapid air pressure loss ................5-11
Drinking alcohol/drugs and driving ........5-12
Driving safety precautions .............5-12
All-wheel drive (AWD) driving safety
precautions (if so equipped) .............5-14
Infiniti Vehicle Immobilizer system ...........5-14
Ignition switch ...................... .5-15
Steering lock ..................... .5-15
Key positions ..................... .5-15
Push-button ignition switch (if equipped) ......5-16
Key positions with the push-button ignition
switch ......................... .5-17
Removing the start/stop button ..........5-17
Emergency engine shut off .............5-18
Before starting engine ................. .5-18
Starting engine ...................... .5-18
Starting procedure with the key ..........5-18
Starting procedure using the push-button
ignition switch (if equipped) .............5-19Driving the vehicle
................... .5-20
Driving with Automatic Transmission ......5-20
Parking brake ....................... .5-27
Applying/releasing manually ............5-27
Applying automatically (vehicles with
automatic transmission) ...............5-28
Releasing automatically ...............5-28
Emergency braking ................. .5-28
Idle Stop/Start System (if equipped) .........5-29
Automatic engine switch-off ............5-29
Automatic engine start ...............5-30
Deactivating/activating the Idle Stop/Start
function ........................
.5-30
Lane

departure warning (LDW) system
(if equipped) ....................... .5-31
LDW system operation ...............5-32
How to enable/disable the LDW system . . . .5-33
LDW system limitations ...............5-33
LDW system temporarily unavailable .......5-35
System malfunction ................ .5-35
System maintenance ................ .5-36
Blind Spot Warning (BSW) system (if equipped) . .5-36 BSW system operation ...............5-38
How to enable/disable the BSW system . . . .5-40
BSW system limitations ...............5-40
System temporarily unavailable ..........5-45
Radar maintenance ................. .5-46

•Whenever you drive off-road through
sand, mud or water as deep as the wheel
hub, more frequent maintenance may be
required. For additional information, re-
fer to "Maintenance schedules" in the
"9. Maintenance and Schedules"
section.
ALL-WHEEL DRIVE (AWD)
DRIVING SAFETY PRECAUTIONS
(IF SO EQUIPPED)
WARNING
•Replacing tires with those not originally
specified by INFINITI could affect the
proper operation of the TPMS.
•Always use tires of the same type, size,
brand, construction (bias, bias-belted or
radial), and tread pattern on all four
wheels. Install tire chains on the front
wheels when driving on slippery roads
and drive carefully.
•This vehicle is not designed for off-road
(rough road) use. Do not drive on sandy
or muddy roads that tires may get stuck
in.
•For AWD equipped vehicles, do not at-
tempt to raise two wheels off the
ground and shift the transmission to any
D (Drive) or R (Reverse) position with
the engine running. Doing so may result
in drivetrain damage or unexpected ve-
hicle movement which could result in se-
rious vehicle damage or personal injury
•Do not attempt to test an AWD
equipped vehicle on a 2-wheel dyna-
mometer, (such as the dynamometers
used by some states for emissions test-
ing), or similar equipment even if the
other two wheels are raised off the
ground. Make sure you inform test facil-
ity personnel that your vehicle is
equipped with AWD before it is placed
on a dynamometer. Using the wrong
test equipment may result in drivetrain
damage or unexpected vehicle move-
ment which could result in serious ve-
hicle damage or personal injury.
•When a wheel is off the ground due to an
unlevel surface, do not spin the wheel
excessively. The INFINITI Vehicle Immobilizer System will
not allow the engine to start without the use
of the registered key.
If the engine fails to start using the registered
key, it may be due to interference caused by
another registered key, an automated toll
road device or automated payment device on
the key ring. Restart the engine using the
following procedures:
1. Leave the ignition switch in the ON posi-
tion for approximately 5 seconds.
2. Turn the ignition switch to the OFF or LOCK position and wait approximately 5
seconds.
3. Repeat Step 1 and 2 again.
4. Restart the engine while holding the de- vice (which may have caused the interfer-
ence) separate from the registered key.
If the no start condition re-occurs, INFINITI
recommends placing the registered key on a
separate key ring to avoid interference from
other devices.
INFINITI VEHICLE IMMOBILIZER
SYSTEM
5-14Starting and driving

0OFF position
1ACC position
2ON position
3START position
WARNING
Never remove the key or turn the ignition
switch to the OFF position while driving.
The steering wheel will lock and could
cause the driver to lose control of the ve-
hicle. This could result in serious vehicle
damage or personal injury.
CAUTION
Use electrical accessories with the engine
running to avoid discharging the vehicle
battery. If you must use accessories while
the engine is not running, do not use them
for extended periods of time and do not use
multiple electrical accessories at the same
time.
The switch includes an anti-theft steering
lock device.
STEERING LOCK
To lock the steering wheel
1. Turn the key to the OFF position.
2. Remove the key from the ignition switch.
3. Turn the steering wheel 1/6 of a turn clockwise from the straight up position.
To unlock the steering wheel
1. Insert the key into the ignition switch.
2. Gently turn the key while rotating thesteering wheel slightly right and left.
KEY POSITIONS
OFF (Normal parking position)
0
The ignition key can only be removed when in
this position.
The steering lock can only be locked in this
position.
ACC (Accessories)/1
The engine is turned off without locking the
steering wheel. This position activates elec-
trical accessories, such as the radio, when the
engine is not running.
ON (Normal operating position)2
This position turns on the ignition system and
electrical accessories.
START3
The engine starter activates and the engine
will start. As soon as the engine has started,
release the key immediately. It will return to
the ON position.
NOTE
For vehicles fitted with Idle Stop/Start Sys-
tem:
When the engine is automatically stopped
by the Idle Stop/Start System the ignition
switch can still be operated as usual.
NPA1483
IGNITION SWITCH
Starting and driving5-15