2018 INFINITI QX30 air condition

The iPod touch® may not respond quickly
with the system in some cases.
Make sure that the iPod® firmware is up-
dated.
The Lightning
TMconnector works with
iPhone® 5, iPhone® 5S, iPhone® 6, iPhone®
6 Plus, iPod touch® (5th generation), and
iPod nano® (7th generation).
The 30-pin connector works with iPhone®
4S, iPhone® 4, iPhone® 3GS, iPhone® 3G,
iPhone®, iPod touch® (1st through 4th gen-
eration), iPod classic®, and iPod nano® (1st
through 6th generation).
USB works with iPhone® 5, iPhone® 4S,
iPhone® 4, iPhone® 3GS, iPhone® 3G,
iPhone®, iPod touch® (1st through 5th gen-
eration), iPod classi®c, and iPod nano ® (1st
through 7th generation).
4-76Display screen, heater and air conditioner, and audio system

How to view iPod operation screen
1Search condition indicator:
This indicates the current search
condition.
2[Source]:
Touch to switch to the source list screen.
Selecting audio source page 4-65
3Play time:
The play time of the track is displayed.
4Track information:
Track information such as the song title,
artist name and album name is displayed.
5Audio source indicator:
This indicates that iPod is currently se-
lected among other sources.
6Album artwork (if equipped):
An image of the album artwork is dis-
played when available.
7Track number:
This indicates the track number and the
total number of tracks.
8Shuffle mode indicator:
Touch to change the shuffle mode.
Mode Screen display
Shuffle albums
Albums
All Songs
Songs
Shuffle Off
OFF
9[]/[]:
Touch to play/pause the track.
10iPod menu:
- [Previous List]
- [Playlists]
- [Artists]
- [Songs]
- [Albums]
- [Genres]
- [Composers]
- [Podcasts]NAA1633
Display screen, heater and air conditioner, and audio system4-77

- [Audiobooks]
- [Shuffle]
- [Repeat]
11Repeat mode indicator:
Touch to change the repeat mode.
Mode Screen display
All Track Repeat
All
1 Track Repeat
1 Track
Repeat Off
OFF
iPod player operation
Activation and playing:
Inserting the iPod cable into the connector
will activate the iPod mode.
iPod can also be selected from the audio
sources list and the source bar by touch panel
operation or by pushing .
Selecting audio source page 4-65
Main audio buttons page 4-64
To play and pause the iPod, touch [Play]/
[Pause] in the iPod menu.
Selecting search method:
A list of search methods is displayed in the
iPod menu. Touch and select an item to play
the iPod in your preferred settings. Fast-forwarding/rewinding:
Push and hold
to fast-
forward or rewind the song. Release •CAT•TRACK> to play the song at normal
speed.
Changing play mode:
Touch [Shuffle] or [Repeat] from the iPod
menu to select the play mode.
Skipping songs:
Push to skip to the
next or previous song.
Even when iPods or iPhones are inserted into
both of the two USB connectors, the system
recognizes only one of the connected iPods
or iPhones at a time.
BLUETOOTH® STREAMING
AUDIO
Your vehicle is equipped with Bluetooth®
Streaming Audio.
If you have a compatible Bluetooth® device
with streaming audio (A2DP profile), you can
set up a wireless connection between your
Bluetooth® device and the in-vehicle audio
system. This connection allows you to listen
to the audio from the Bluetooth® device us-
ing your vehicle speakers. It may also allow
basic control of the device for playing and skipping audio files using the AVRCP
Bluetooth® profile. Not all Bluetooth® de-
vices have the same level of controls for
AVRCP. Please consult the manual for your
Bluetooth® device for more details.
Wireless LAN (Wi-Fi) and the Bluetooth®
functions share the same frequency band
(2.4 GHz). Using the Bluetooth® and the
wireless LAN functions at the same time may
slow down or disconnect the communication
and cause undesired noise. It is recom-
mended that you turn off the wireless LAN
(Wi-Fi) when using the Bluetooth® functions.
Regulatory Information
FCC Regulatory information:
FCC ID : HYQDNNS075
NOTE: This device complies with part 15 of
the FCC Rules. Operation is subject to the
following two conditions: (1) This device may
not cause harmful interference, and (2) this
device must accept any interference received,
including interference that may cause unde-
sired operation.
FCC WARNING: Changes or modifications
not expressly approved by the party respon-
sible for compliance could void the user’s au-
thority to operate the equipment.
CAUTION : Radio Frequency Radiation Ex-
posure
4-78Display screen, heater and air conditioner, and audio system

This equipment complies with FCC radiation
exposure limits set forth for uncontrolled en-
vironment and meets the FCC radio fre-
quency (RF) Exposure Guidelines. This equip-
ment has very low levels of RF energy that it
deemed to comply without maximum permis-
sive exposure evaluation (MPE). But it is de-
sirable that it should be installed and oper-
ated with at least 20 cm and more between
the radiator and person’s body.
Co-location: This transmitter must not be co-
located or operated in conjunction with any
other antenna or transmitter.
IC Regulatory information:
The antenna cannot be removed (and
changed) by user.
NOTE: This device complies Industry Canada
license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1)
This device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause unde-
sired operation of the device.
CAUTION : Radio Frequency Radiation Ex-
posure
This equipment complies with IC radiation
exposure limits set forth for uncontrolled en-
vironment and meets RSS-102 of the IC ra-
dio frequency (RF) exposure rules. This equip-ment has very low levels of RF energy that it
deemed to comply without maximum permis-
sive exposure evaluation (MPE). But it is de-
sirable that it should be installed and oper-
ated with at least 20 cm and more between
the radiator and person’s body.
Co-location: This transmitter must not be co-
located or operated in conjunction with any
other antenna or transmitter.
This Class B digital apparatus meets all re-
quirements of the Canadian Interference
Causing Equipment Regulations.
Connecting Bluetooth® streaming
audio device
Bluetooth® streaming audio device must be
connected to the vehicle before operation.
Connecting Bluetooth® device page 4-90
Display screen, heater and air conditioner, and audio system4-79

How to view Bluetooth® streaming
audio operation screen
1[Source]:
Touch to switch to the source list screen. Selecting audio source page 4-65
2Track information:
Track information such as the song title,
artist name and folder name is displayed.
3Audio source indicator:
This indicates that Bluetooth® streaming
audio is currently selected among other
sources.
4Play time:
The play time of the track is displayed.
5[Control]:
Touch to display the control screen.
Bluetooth® streaming audio operation
page 4-82
6Track number
This indicates the track number.
7Repeat mode indicator:
Touch to change the repeat mode.
Mode Screen display
All repeat
All
1 Folder Repeat
1 Folder
1 Track Repeat
1 Track
Repeat Off
OFF
8Bluetooth® streaming audio menu:
- [Play]
- [Pause]
- [Folder/Track]
- [Repeat]
- [Random]
NAA1634
4-80Display screen, heater and air conditioner, and audio system

9Random mode indicator:
Touch to change the random mode.
Mode Screen display
All Random
All
1 Folder Random
1 Folder
Random Off
OFF
Depending on the audio device that is con-
nected to the vehicle, track information may
not be displayed.
Bluetooth® streaming audio
operation
The ability to pause, change tracks, fast-
forward, rewind, randomize and repeat music
may be different between devices. Some or
all of these functions may not be supported
on each device.
•Depending on the Bluetooth® streaming
audio device that is connected, it may not
be possible to perform audio operations.
•Depending on the Bluetooth® streaming
audio device that is connected, a time lag
may occur before music is played back.
•Depending on the application except for
the native audio application that is played
on the Bluetooth® streaming audio device,
incorrect behavior (information lacking,
timer skipping, etc.) may occur.
Activation and playing:
Bluetooth® streaming audio device can be
selected from audio sources list by touching
[Source] or by pushing .
Selecting audio source page 4-65
Main audio buttons page 4-64
To play the Bluetooth® streaming audio de-
vice, touch [Play], and to pause the
Bluetooth® streaming audio device touch
[Pause] in the Bluetooth® streaming audio
menu.
Selecting folder/track:
Touch [Folder/Track] to select a folder/
track.
Changing play mode:
Touch [Repeat] or [Random] in the
Bluetooth® streaming audio menu to change
the play mode. Fast-forwarding/rewinding:
Push and hold
to fast-
forward or rewind the song. Release •CAT•TRACK> to play the song at normal
speed.
Skipping songs/folders:
Push to skip to the next
or previous song.
To skip to the next or previous folder, Push
.
Bluetooth® streaming audio
controls
Touch [Control] on the Bluetooth® Audio
operation screen to display the control
screen.
[Select Au-
dio Device] Touch to select a different
Bluetooth® streaming audio device
from a list of registered Bluetooth®
devices.
See "Bluetooth® settings" later in
this section
[Connect
Device] Touch to connect a new
Bluetooth® device.
Display screen, heater and air conditioner, and audio system4-81

AUDIO SETTINGS
Audio settings can be adjusted or audio related functions can be turned on/off using the following procedure.
Some of the setting items may not be displayed when the audio system is turned off.
1. Push

• [Display Album Cover Art]
Turn this item on to display image files from the media device. If the media device does not contain images, no image will be displayed.
• [Radio Settings]
Setting itemsAction
[HD Mode AM] When this item is turned on, the analog and digital reception switches
automatically. When this item is turned off, the reception is fixed in the
analog mode.
[HD Mode FM]
Display screen, heater and air conditioner, and audio system4-83