2
Cockpit Overview
1 Dynamic Driver Assistance (DDA) switch (if so equipped)
2 Intelligent Cruise Control (ICC) switches (if so equipped)
3 Wiper and washer switch
4 Trip computer controls and reset button (behind the steering wheel)
5 Vehicle information display
6 Paddle shifters
7 Vehicle information display brightness controls (behind the steering wheel)
8 Combined turn signal / headlight control switch
9 Menu control switches and audio control switches
10 Bluetooth® control switches and audio control switches
2917603_18a_Q70_US_pQRG_051717.indd 25/17/17 2:24 PM
4
Instrument Panel
1 Multi-function control touch-screen / RearView Monitor display / Around View® Monitor
(AVM) display (if so equipped)
2 Climate control panel
• H eater and air conditioning (automatic)
•
F
ront/Rear window defroster
3 Navigation control panel
4 Audio control panel
5 Shift lever
6 Push-button ignition system (behind the steering wheel)
7 Adaptive Front Lighting system switch (behind the steering wheel)
8 Tilt/Telescopic steering wheel switch (behind the steering wheel)
9 Parking brake
10 Hood latch release
11 Lower switch bank
• Vehicle Dynamic Control (VDC)
OFF switch
•
T
runk release • R
ear sunshade switch (if so equipped)
• W arning Systems switch (if so equipped)
•
H
eated steering wheel switch (if so equipped)
2917603_18a_Q70_US_pQRG_051717.indd 45/17/17 2:25 PM
14
Move the lever 1 up or down to one of
the following positions to operate the
windshield wipers:
MIST
One sw
eep operation
OFF
Wipers ar
e OFF
AUTO
R
ain-sensing automatic wipe
LO
C
ontinuous wipe, slow
HI
C
ontinuous wipe, fast
To adjust the wiper sensitivity for the AUTO
setting, twist the control ring
2.
Pull the lever
1 toward you operate the
windshield washer.
To turn the rain-sensing automatic wiper
system off, push up the lever to the OFF
position, or pull down the lever to the LO or
HI position.
Wiper and Washer Switch
1
2
SYSTEM OPERATING TIPS •
The in terior of the vehicle should be as quiet
as possible.
•
Speak
naturally. Speaking too fast, too slow, too
soft, or too loud makes voice recognition
more difficult.
•
C
onfirm that the correct voice commands are
being used. Glance at the screen to see the currently
available commands.
USING THE VOICE RECOGNITION SYSTEM
•
Press the
button 1 on the steering wheel, and a
list of commands will appear on the screen.
•
A
fter the tone sounds, speak the command.
•
T
o skip the voice prompt and give the command
immediately, press the
button 1 on the steering
wheel to interrupt the system. Speak the next
command after the tone sounds.
•
T
o cancel the command, press and hold the
button 1 on the steering wheel.
Please see your Owner’s Manual for important safety information, system
limitations, and additional operating and feature information.
Voice Recognition
1
PULLING UP THE WIPER ARM
The wiper arm should be in the UP
position when replacing the wiper.
•
With the shift le
ver in the
P (PARK) position, place
the ignition switch in the
OFF position.
•
Within 1 minut
e, push the
wiper switch to the MIST
position twice. The wiper
operation stops in mid-
operation and the wiper arm
can be pulled up.
•
T
o return the wiper arm, place
the wiper arm in the DOWN
position and operate the wiper
switch once.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating
and feature information.
2917603_18a_Q70_US_pQRG_051717.indd 145/17/17 2:27 PM
