4
Instrument Panel
1 Multi-function control touch-screen / RearView Monitor display / Around View® Monitor
(AVM) display (if so equipped)
2 Climate control panel
• H eater and air conditioning (automatic)
•
F
ront/Rear window defroster
3 Navigation control panel
4 Audio control panel
5 Shift lever
6 Push-button ignition system (behind the steering wheel)
7 Adaptive Front Lighting system switch (behind the steering wheel)
8 Tilt/Telescopic steering wheel switch (behind the steering wheel)
9 Parking brake
10 Hood latch release
11 Lower switch bank
• Vehicle Dynamic Control (VDC)
OFF switch
•
T
runk release • R
ear sunshade switch (if so equipped)
• W arning Systems switch (if so equipped)
•
H
eated steering wheel switch (if so equipped)
2917603_18a_Q70_US_pQRG_051717.indd 45/17/17 2:25 PM
8
5
6
Cruise Control
3
2
1
4
3
2 1
CONVENTIONAL CRUISE CONTROL (if so equipped)
SETTING A CRUISING SPEED
•
Press the CRUISE ON/OFF switch 1 to turn on the system.
•
With the
vehicle at the desired speed, push down the switch
2 to COAST/SET to
enable cruise control.
•
The cruising speed c
an be adjusted to a higher or lower speed by toggling the
control switch
2 up or down.
CANCELING THE PRESET SPEED
•
Push the CANCEL switch
3 or tap the brake pedal.
INTELLIGENT CRUISE CONTROL (ICC) (if so equipped)
The ICC system is designed to maintain a selected distance from the vehicle in front of
you and reduce the speed to match a slower vehicle ahead.
•
T
o increase the distance to the vehicle ahead to be maintained by the ICC system,
push the distance switch
4 until the display shows the desired set distance, which
is shown by the number of lines on the set distance indicator
5.
•
When a
vehicle is detected ahead, a car icon will illuminate on the vehicle ahead
detection indicator
6 and your vehicle will reduce the speed to match the
slower vehicle.
To use Conventional (fixed speed) Cruise Control mode (if so equipped):
•
While cruise c
ontrol is off, push and hold the CRUISE ON/OFF switch
1 for more
than 1.5 seconds. The CRUISE indicator light will illuminate.
•
A
ccelerate to the desired speed.
•
Push the swit
ch
2 down toward COAST/SET and release it. The SET indicator
light will illuminate.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and
feature information.
INTELLIGENT CRUISE CONTROL (ICC) (if so equipped)
2917603_18a_Q70_US_pQRG_051717.indd 85/17/17 2:25 PM
