2018 INFINITI Q60 COUPE brake light

4
Instrument Panel
1 Multi-function control touch-screen/RearView Monitor display/Around View® Monitor
display (if so equipped)
2 Lower display menu buttons
3 Climate control panel
• Heater and air conditioning (automatic)
• Front/Rear window defroster

4 Audio controls
5 Seat heating (if so equipped)
6 Shift lever
7 Infiniti multi-function controller
8 Drive mode switch
9 Parking brake (behind steering wheel)
10 External light switches
11 Lower switch bank
• Idle Stop/Start (ISS) OFF switch (if so equipped)
• Vehicle Dynamic Control (VDC) OFF Switch
• Trunk release switch

13
Idle Stop/Start (ISS) (if so equipped)
2
1
The ISS activates to prevent unnecessary fuel consumption, exhaust emissions
and noise.
• When the br ake pedal is depressed and the vehicle is stopped, the engine will
stop automatically.
• When you release your foot from the brake pedal, the engine will
restart automatically.
• The ISS indic ator light 1 will inform you of the ISS status.
• The system can be temporarily deactivated by pushing the Idle Stop OFF
AUTOOFF switch 2.
• There are certain conditions in which the ISS will not activate, including:
• When the br ake pedal is not firmly depressed.
• When the st eering wheel is operated or wheels are not pointed straight ahead.
• When the engine is w arming up.
• When the c abin temperature is below 68°F (20°C) or above 86° F (30°C).
• When the fr ont/rear defroster is on or fan speed is at maximum.
• Please r efer to the “Starting and driving (section 5)” of your Owner’s Manual for
the additional conditions in which the ISS will not activate.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and
feature information.

16
HomeLink® Universal Transceiver
(if so equipped)
HomeLink
To program the HomeLink® Universal Transceiver:
1 . Position the handheld transceiver 1-3 in (26-76 mm) away from
the HomeLink surface, keeping the HomeLink indicator light
in view.
2 . Press and hold the desired HomeLink button and the handheld
transmitter button simultaneously until the HomeLink indicator
light flashes slowly and then rapidly.
3. Both buttons may now be released.
4 Press and hold the HomeLink button, and a blinking light that
turns to a solid, continuous light after 2 seconds will display.
5 . At the receiver of the device press and release the program
button (this button can typically be found near the hanging
antenna wire of the device you are programing into HomeLink).
6. Press and hold the programed HomeLink button for 2 seconds
and release.Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
REMOTE ENGINE START
(if so equipped)
• The remote engine start system
must be enabled in the vehicle
settings within the lower display.
To start your vehicle remotely:
1. Press the lock button 1
to lock the vehicle.
2. Press and hold the remote start
button 2 within 5 seconds of
pressing the lock button 1 and
the engine will start.
• To start driving, depress the
brake pedal and press the ignition
switch START/STOP button.
State laws may apply; review
local laws before using.
ROLL DOWN FEATURE
The windows can be opened remotely using your Infiniti Intelligent Key.
• Press and hold the unlock button 3 to open the windows and
moonroof (if so equipped) remotely.
• If the unlock button 3 is released, the windows will stop.
To resume the roll down feature, press and hold the
unlock button
3 again.Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
Infiniti Intelligent Key System
1
2
3