Quick Reference Guide I 27
26 I Quick Reference Guide
Elantra GT HYUNDAI
MULTIMEDIA
Your vehicle is equipped with Voice Recognition technology which allows drivers to
operate their phones without having to take their eyes off the road to minimize
distractions.
Voice recognition performance may be affected if driving with windows
and sun roof open; when the heating-cooling system is on; when driving in
a tunnel or when driving on rugged and uneven roads.
Quick reference on using voice commands
To start voice command, press the
key, the following commands are
available:
Command FunctionCall Displays downloaded Contacts.
Call Calls saved in Contacts.
Dial Number Displays a screen where you can say a phone number to dial.
Dial You can directly say the number to call.
ex) Dial 111 555 1234
RedialCalls the number you last dialed.
Call History Displays your Call History.
1. Press the PHONE( ) button in the head unit or CALL( ) button
in the steering wheel remote control.
2. Pair your car after your mobile phone detects the Bluetooth
device.
3. Enter the passkey or accept the authorization popup.
4. Connect Bluetooth.Phone setup (pairing phone) with Audio
NOTE:
Vehicle must be parked to complete pairing process.
VOICE RECOGNITION TIPS
BLUETOOTH
® PHONE OPERATION
Phone setup (pairing phone) with Navigation1. Press the CALL( ) button in the steering wheel remote control.
2. Pair your car after your mobile phone detects the Bluetooth device.
3. Enter the passkey or accept the authorization popup.
4. Connect Bluetooth.NOTE:
Vehicle must be parked to complete pairing process.
Quick Reference Guide I 39
38 I Quick Reference Guide
Elantra GT HYUNDAI
DRIVING
ESC automatically selects the ON
position when the engine is started.To turn off Traction ControlPress the ESC OFF button once.To turn off Traction & Stability
ControlPress the ESC OFF button for more
than 3 seconds.The ESC system is an electronic
system designed to help the driver
maintain vehicle control under
adverse conditions.
LANE KEEPING ASSIST SYSTEM (LKAS)
The Lane Keeping Assist System
detects lane markers on the road,
and assist the driver's steering to
help keep the vehicle between lanes.
• To turn on the LKAS, press the
LKAS switch.
• To turn off the LKAS, press the
switch again.
LKAS opearates only while the
vehicle speed is over 40mph and
below 110mph.
For more detailed information, please
refer to Section 5 of the Owner's
Manual.
ELECTRONIC STABILITY CONTROL (ESC)
2
The Blind Spot Detection system uses
radar sensors to monitor and warn the
driver of an approaching vehicle in the
driver's blind spot area.1 Blind Spot Detection (BSD)2 Lane Change Assist (LCA)3 Rear Cross Traffic Alert (RCTA)
• To turn on the BSD, press the BSD
button (indicator illuminated).
• BSD and LCA operate in D (Drive)
over appx. 20mph.
• RCTA operates in R (Reverse)
under appx. 6mph.
• To turn off the BSD, press the BSD
button again.
When the vehicle is in R (Reverse), the system provides an alert if a
vehicle or pedestrian is approaching from the sides.Rear Cross Traffic Alert
3
1AUTOMATIC EMERGENCY BRAKING (AEB)The Automatic Emergency Braking (AEB) system is designed to help
detect and monitor the vehicle ahead or detect a pedestrian in the
roadway through radar signals and camera recognition to warn the
driver that a collision is imminent, and if necessary, apply emergency
braking.To activate or deactivate the AEB system, select or deselect:
“User Settings
Driving Assist
Automatic Emergency Braking”
The AEB deactivates when system setting is deselected. A warning
light
will illuminate on the LCD display when the AEB system is
deactivated. Please refer to the Owner’s Manual for more information.
Caution: Do not try to test the AEB system.
BLIND SPOT DETECTION SYSTEM (BSD)
