
104 uu Indicators u Driver Information Interface Wa rning and Information Messages
Instrument Panel Message Condition Explanation●
Appears when there is a pr oblem with the sensor on 
the 12-volt battery. ●
Have your vehicle checked by an authorized Honda 
Clarity Plug-In Hybrid dealer. 2 Checking the 12-Volt Battery  P. 508●
Appears along with the battery charging system 
indicator when the batte ry is not charging. ●
Turn off the climate control system and rear defogger to 
reduce electricity consumption. 2 If the 12-Volt Battery Charging System Indicator 
Comes On  P. 546●
Appears when the engine  oil pressure is low. ●
Appears while driving  - Immediately stop in a safe 
place. 2 If the Low Oil Pressure Warning Appears  P. 545●
Appears when the engine coolant temperature gets 
abnormally high. 2 Overheating  P. 542●
Appears when the engine coolant temperature is 
near its upper limit. ●
Drive slowly to prevent overheating.●
Appears if there is a pr oblem with the cooling 
system. ●
Drive slowly to prevent ov erheating and have your 
vehicle checked by an author ized Honda Clarity Plug-In 
Hybrid dealer as soon as possible.●
Appears when the fuel fill cap is loose or is not 
installed. 2 Tighten Fuel Cap Message  P. 54718 CLARITY PHEV CSS-31TRW6000.book  104 ページ  2017年8月31日 木曜日 午後2時49分 

Continued
195uu Climate Control System u Using Automatic Climate Control
Controls
■ Switching the vent mode
1. Press the  CLIMATE  button.
2. Select a desired vent mode icon.
■ A/C on and off
1. Press the  CLIMATE  button.
2. Select  On  or  Off . 1 Using Automatic Climate Control
When you unlock the doors with your remote, the 
driver’s ID ( DRIVER 1  or  DRIVER 2 ) is detected, and 
the climate control settings are turned to the 
respective mode automatically when you set the 
power mode to ON.
If any icons are not select ed within several seconds 
after the display is switched, it returns to the previous 
screen. In this case, press the  CLIMATE  button again.
You can change the lengt h of time the climate 
control display stays on.
2 Customized Features  P. 306
While ECON mode is active, the climate control 
system may have reduced  cooling performance.Models with driving position memory system
All models18 CLARITY PHEV CSS-31TRW6000.book  195 ページ  2017年8月31日 木曜日 午後2時49分 

471Maintenance This chapter discusses basic maintenance.
Before Performing Maintenance
Inspection and Maintenance ............ 472
Safety When Performing Maintenance...473
Parts and Fluids Used in Maintenance 
Service ........................................... 474
Maintenance Minder TM
..................... 475
Maintenance Under the Hood
Maintenance Items Under the Hood .. 480
Opening the Hood ........................... 481
Recommended Engine Oil ................ 482
Oil Check ......................................... 483
Adding Engine Oil ............................ 484
Changing the Engine Oil and Oil Filter ...485 Engine Coolant ................................ 488
Cooling System ................................ 490
Transmission Fluid ............................ 492
Brake Fluid ....................................... 492
Refilling Window Washer Fluid......... 493
Replacing Light Bulbs ....................... 494
Checking and Maintaining Wiper 
Blades .......................................... 496
Checking and Maintaining Tires
Checking Tires ................................. 499
Tire and Loading Information Label .. 500
Tire Labeling .................................... 500
DOT Tire Quality Grading (U.S. Vehicles).. 502 Wear Indicators ............................... 504
Tire Service Life ................................ 504
Tire and Wheel Replacement ........... 505
Tire Rotation .................................... 506
Winter Tires ..................................... 507
12-Volt Battery ................................. 508
Remote Transmitter Care
Replacing the Button Battery ........... 510
Climate Control System Maintenance .. 511
Cleaning
Interior Care .................................... 513
Exterior Care.................................... 515
Accessories and Modifications ........ 51918 CLARITY PHEV CSS-31TRW6000.book  471 ページ  2017年8月31日 木曜日 午後2時49分 

488 uu Maintenance Under the Hood u Engine Coolant
Maintenance Engine Coolant This coolant is premixed with 50% antifreeze and 50% water. Do not add any 
straight antifreeze or water.
We recommend you check the engine coolan t level every time you refuel or you 
charge the High Voltage battery. Check the re serve tank first. If it is completely 
empty, also check the coolant level in  the radiator. Add the engine coolant 
accordingly.
1. Make sure the engine and radiator are 
cool.
2. Check the amount of c oolant in the reserve 
tank.
u If the coolant level is below the  MIN  
mark, add the specified coolant until it 
reaches the  MAX  mark.
3. Inspect the cooling  system for leaks.Specified coolant: Honda Long  Life Antifreeze/Coolant Type 2
■ Reserve Tank 1 Engine Coolant NOTICE
Genuine Honda engine coolan t is a 50/50 mixture of 
antifreeze and water that can withstand freezing at 
temperatures as low as about −31°F (−35°C). If your 
vehicle is consistently subjected to temperatures 
below this, the concentration of antifreeze in the 
coolant should be  increased. Consult an authorized 
Honda Clarity Plug-In Hybr id dealer for details.
If Honda antifreeze /coolant is not available, you may 
use another major brand of  non-silicate coolant as a 
temporary replacement. Check that it is a high quality 
coolant recommended for  aluminum engines. 
Continued use of any non-Honda coolant can result 
in corrosion, causing the cooling system to 
malfunction or fail. Have  the cooling system flushed 
and refilled with Honda anti freeze/coolant as soon as 
possible.
Do not add rust inhibitors  or other additives to your 
vehicle’s cooling system. They may not be compatible 
with the coolant or with the engine components.Reserve 
TankMAX
MIN18 CLARITY PHEV CSS-31TRW6000.book  488 ページ  2017年8月31日 木曜日 午後2時49分 

489uu Maintenance Under the Hood u Engine Coolant
Maintenance
1. Make sure the engine and radiator are 
cool.
2. Turn the radiator cap 1/8 turn counter-
clockwise and relieve any pressure in the 
cooling system.
3. Push down and turn the radiator cap 
counter-clockwise to remove it.
4. The coolant level should be up to the base 
of the filler neck. Add coolant if it is low.
5. Put the radiator cap back on, and tighten it 
fully.■ Radiator 1 Radiator
NOTICE
Pour the fluid slowly and ca refully so you do not spill 
any. Clean up any spills immediately; they can 
damage components in the engine compartment.
3
WARNING Removing the radiator cap while the 
engine is hot can cause the coolant to spray 
out, seriously scalding you.
Always let the engine and radiator cool 
down before removing  the radiator cap.Radiator Cap18 CLARITY PHEV CSS-31TRW6000.book  489 ページ  2017年8月31日 木曜日 午後2時49分 

490 uu Maintenance Under the Hood u Cooling System
Maintenance Cooling System Coolant is used to reduce the temperature  of the high voltage battery and inverter 
coolant. When checking the c oolant level, make sure to  follow the procedures listed 
below. If the coolant level is below the  MIN  mark, have your vehicle inspected by an 
authorized Honda  Clarity Plug-In Hybrid dealer.
1. Check the fluid level in the tank.
2. If the coolant level has dropped below the 
MIN  level, have your vehicle serviced at an 
authorized Honda Clarity Plug-In Hybrid 
dealer.
u Only a properly trained technician can 
refill the coolant an d check the system 
for leaks.Specified coolant: Honda Long  Life Antifreeze/Coolant Type 2
■ Checking the Inverter Coolant Level 1 Cooling System NOTICE
Genuine Honda engine coolan t is a 50/50 mixture of 
antifreeze and water that can withstand freezing at 
temperatures as low as about −31°F (−35°C). If your 
vehicle is consistently subjected to temperatures 
below this, the concentration of antifreeze in the 
coolant should be  increased. Consult an authorized 
Honda Clarity Plug-In Hybr id dealer for details.
Only use the genuine Honda coolant.
Expansion Tank MAX
MIN18 CLARITY PHEV CSS-31TRW6000.book  490 ページ  2017年8月31日 木曜日 午後2時49分 

491uu Maintenance Under the Hood u Cooling System
Maintenance
1. Check the fluid level in the tank from the 
window.
2. If the coolant level has dropped below the 
MIN  level, have your ve hicle serviced at an 
authorized Honda Clarity Plug-In Hybrid 
dealer.
u Only a properly trained technician can 
refill the coolant and check the system 
for leaks.■ Checking the Coolant Level for the High Voltage Battery 
and Related Parts MAX
MIN Window
Expansion Tank18 CLARITY PHEV CSS-31TRW6000.book  491 ページ  2017年8月31日 木曜日 午後2時49分 

uu Overheating u How to Handle Overheating
544
Handling the Unexpected ■ Next thing to do
1. Check that the cooling fan is operating and 
turn the power system off once the  Stop 
Driving When Safe. Engine 
Temperature Too Hot  message 
disappears.
u If the cooling fan is not operating, 
immediately turn the power system off.
2. Once the engine has  cooled down, inspect 
the coolant level an d check the cooling 
system components for leaks.
u If the coolant level in the reserve tank is 
low, add coolant until it reaches the 
MAX  mark.
u If there is no coolan t in the reserve tank, 
check that the radiator is cool. Cover the 
radiator cap with a heavy cloth and open 
the cap. If necessary, add coolant up to 
the base of the filler neck, and put the 
cap back on.
■ Last thing to do
Once the engine has cooled sufficiently, turn the power system on.
If the  Stop Driving When Safe. Engine Temperature Too Hot  message does not 
appear, resume driving. If it appears ag ain, contact an auth orized Honda Clarity 
Plug-In Hybrid dealer for repairs. 1 The  Stop Driving When Safe.  Engine Temperature Too 
Hot  Message Appears on the Multi-Information Display
If the coolant is leaking,  contact an authorized Honda 
Clarity Plug-In Hybrid  dealer for repairs.
Use water as an emergency/temporary measure only. 
Have an authorized Honda Clarity Plug- In Hybrid 
dealer flush the system wi th proper antifreeze as 
soon as possible.3
WARNING Removing the radiator cap while the 
engine is hot can cause the coolant to spray 
out, seriously scalding you.
Always let the engine and radiator cool 
down before removing  the radiator cap.Reserve TankMAX
MIN18 CLARITY PHEV CSS-31TRW6000.book  544 ページ  2017年8月31日 木曜日 午後2時49分