2018 HONDA CLARITY PLUG IN HYBRID battery

183Continued
Controls
Interior Lights/Interior Convenience Items Interior Lights ■ ON
The interior lights come on regardless of
whether the doors are open or closed.
■ Door activated
The interior lights come on in the following
situations:
• When any of the doors are opened.
• You unlock the driver’s door.
• When the power mode is set to VEHICLE
OFF (LOCK).
■ OFF
The interior lights remain off regardless of
whether the doors are open or closed.■ Interior Light Switches 1 Interior Light Switches
In the door activated position, the interior lights fade
out and go off about 30 se conds after the doors are
closed.
The lights go off after about 30 seconds in the
following situations:
• When you unlock the driver’s door but do not open
it.
• When you set the power mode to VEHICLE OFF
(LOCK) but do not open a door.
You can change the interi or lights dimming time.
2 Customized Features P. 306
The interior lights go off i mmediately in the following
situations:
• When you lock the driver’s door.
• When you close the driver’s door in ACCESSORY
mode.
• When you set the power mode to ON.
To avoid draining the 12-vo lt battery, do not leave
the interior light on for an extended length of time
when the power system is off.
If you leave any of the doors open in VEHICLE OFF
(LOCK) mode, the interior lights go off after about 15
minutes.Off OnDoor Activated Position18 CLARITY PHEV CSS-31TRW6000.book 183 ページ ２０１７年８月３１日　木曜日　午後２時４９分

Continued
189uu Interior Lights/Interior Convenience Items u Interior Convenience Items
Controls
The accessory power sockets can be used when the power mode is in ACCESSORY
or ON.
■ Accessory power socket (console panel)
Open the cover to use it.
■ Accessory power socket (back of the
console compartment)
Open the cover to use it.■ Accessory Power Sockets 1 Accessory Power Sockets NOTICE
Do not insert an automotive type cigarette lighter
element. This can overheat the power socket.
The accessory power socket s are designed to supply
power for 12-volt DC acce ssories that are rated 180
watts (15 amps) or less.
To prevent 12-volt battery drain, only use the power
socket with the power system on.18 CLARITY PHEV CSS-31TRW6000.book 189 ページ ２０１７年８月３１日　木曜日　午後２時４９分

Continued
191uu Interior Lights/Interior Convenience Items u Interior Convenience Items
Controls
The power mode must be in ON to use the
seat heaters.
Press the seat heater button:
Once - The HI setting (three indicators on)
Twice - The MID setting (two indicators on)
Three times - The LO setting (one indicator on)
Four times - The OFF setting (no indicators on)■ Seat Heaters 1 Seat Heaters
Avoid using seat heaters when the 12-volt battery
charge is low. The vehicle may be difficult to start.
After a certain period of time, the strength setting for
the seat heaters will automatically be reduced by one
level at a time until the seat heaters shuts off. The
elapsed time varies according to the interior
environment.
When the ECON mode is active, the driver’s side seat
heater functions accordi ng to the status of the
climate control system. If you want to use only the
climate control system, press the seat heater button
to OFF.3
WARNING Heat induced burns are possible when
using seat heaters.
Persons with a diminished ability to sense
temperature (e.g., persons with diabetes,
lower-limb nerve damage, or paralysis) or
with sensitive skin should not use seat
heaters.18 CLARITY PHEV CSS-31TRW6000.book 191 ページ ２０１７年８月３１日　木曜日　午後２時４９分

Continued
199uu Climate Control System u Using Automatic Climate Control
Controls
You can operate the climate control system from outside the vehicle.
■ To turn on the system
1. Press the lock button.
u Some exterior lights flash.
2. Within about five seconds, press and hold
the climate button.
u Some exterior lights flash.
u After a few seconds, some exterior lights
flash six times and the climate control
system is turned on.
■ To turn off the system
Press and hold th e climate button.
u Some exterior lights flash and the climate
control system is turned off.■ Turning the Climate Control System On and Off with the
Remote 1 Turning the Climate Control System On and Off with the Remote
The climate control system does not operate when
any of the following conditions are met.
• A door or the hood is not closed.
• The power mode is set to any mode other than
OFF.
• The brake pedal is being depressed.
• The High Voltage battery level is low.
When you use the climate control system while the
vehicle is charging, it is recommended that you set
the charging level to 240 volt charge.3
WARNING Make sure that no one is inside the vehicle
when you use the remote climate control
system. After a certain period of time has
elapsed, the system sh uts off temporarily.
During this time, the in terior of the vehicle
may heat up or cool down depending on
ambient temperatures. If a child is left
inside the vehicle, extreme temperature
exposure can result in death or serious
injury of the child.Climate
Button Lock
Button18 CLARITY PHEV CSS-31TRW6000.book 199 ページ ２０１７年８月３１日　木曜日　午後２時４９分

uu Climate Control System u Using Automatic Climate Control
200
Controls 1 Turning the Climate Control System On and Off with the Remote
The climate control system automatically turned off
when any of the following conditions are met.
• The system has been operated for more than 30
minutes.
• The High Voltage battery level becomes low.
• A door or the hood is opened.
• The power mode is set to any mode other than
OFF.
• The brake pedal is being depressed.
If the charging connector is unplugged, the High
Voltage battery is used to power the climate control
system.18 CLARITY PHEV CSS-31TRW6000.book 200 ページ ２０１７年８月３１日　木曜日　午後２時４９分

206 uu Audio System u Audio System Theft Protection
Features Audio System Theft Protection The audio system is disabled when it is di sconnected from the power source, such as
when the 12-volt battery is disconnected or goes dead. In certain conditions, the
system may display a code entry screen. If this occurs, reactivate the audio system.
■ Reactivating the audio system
1. Set the power mode to ON.
2. Turn on the audio system.
3. Select and hold the audio system power icon for more than two seconds.
u The audio system is reac tivated when the audio co ntrol unit establishes a
connection with the vehicle control unit. If the control unit fails to recognize
the audio unit, you must go to an authorized Honda Clarity Plug-In Hybrid
dealer and have the audio unit checked.18 CLARITY PHEV CSS-31TRW6000.book 206 ページ ２０１７年８月３１日　木曜日　午後２時４９分

Continued
215uu Audio System Basic Operation u Audio/Information Screen
Features
■ Energy flow screen
The energy flow screen shows th e vehicle’s power flow, and range. 1 Energy flow screen
While the vehicle is stat ionary with the engine
running, the following may appear on the display.
Driving Range by Fuel
High Voltage Battery
Level GaugeEngine IconDriving Range by High
Voltage Battery18 CLARITY PHEV CSS-31TRW6000.book 215 ページ ２０１７年８月３１日　木曜日　午後２時４９分

uu Audio System Basic Operation u Audio/Information Screen
216
Features Shows the engine and High Voltage battery power flow, indicating what is
supplying power to the vehicle and/or charging the battery.
u The indicator for the power transmission appears in blue, and for the battery
charging operation, in green.
Display Color of
indicators Vehicle’s Condition
Blue While Driving:
Power is being supplied by the
engine.
Blue While Driving:
Power is being supplied by the
High Voltage battery.
Blue While Driving:
Power is being supplied by the
High Voltage battery and
engine. 1 Energy flow screen
While the engine provides propulsion directly to the
wheels, the icon appears in the power flow
monitor on the screen.18 CLARITY PHEV CSS-31TRW6000.book 216 ページ ２０１７年８月３１日　木曜日　午後２時４９分