Page 54 of 551

uuSeat Belts uFastening a Seat Belt
52
Safe Driving
3. Position the lap part of the belt as low as 
possible across your hips, then pull up on 
the shoulder part of the belt so the lap part 
fits snugly. Th is lets your strong pelvic 
bones take the force of a crash and reduces 
the chance of internal injuries.
4. If necessary, pull up on the belt again to 
remove any slack, then  check that the belt 
rests across the center of your chest and 
over your shoulder. Th is spreads the forces 
of a crash over the strongest bones in your 
upper body.
The front seats have adjustable shoulder anchors to accommodate taller and shorter 
occupants. 1.Move the anchor up and down while 
holding the release button.
2. Position the anchor so that the belt rests 
across the center of your chest and over 
your shoulder.1Fastening a Seat Belt
To release the belt, push the red  PRESS button and 
then guide the belt by hand until it has retracted 
completely.
When exiting the vehicle, be  sure the belt is properly 
stowed so that it will not get caught in the closing 
door.
3WARNING
Improperly positioning the seat belts can 
cause serious injury or death in a crash.
Make sure all seat belts are properly 
positioned be fore driving.Lap belt 
as low as 
possible
■Adjusting the Shoulder Anchor1Adjusting the Shoulder Anchor
The shoulder anchor  height can be adjusted to four 
levels. If the belt contacts  your neck, lower the height 
one level at a time.
After an adjustment, make  sure that the shoulder 
anchor position is secure.
Push
18 CLARITY FUEL CELL PPO-31TRT6100.book  52 ページ  2017年11月21日 火曜日 午後3時3分 
     
        
        Page 177 of 551

175
uuAdjusting the Seats uHead Restraints
Controls
A passenger sitting in the center back seating 
position should adjust the height of their head 
restraint to an appropriate position before the 
vehicle begins moving.
To raise the head restraint:
Pull it upward.
To lower the head restraint:
Push it down while pressing the release 
button.
Head restraints can be removed for cleaning or repair.
To remove a head restraint:
Pull the restraint up as far as it will go. Then push the release button, and pull the 
restraint up and out.
To reinstall a head restraint:
Insert the legs back in place,  then adjust the head restraint to an appropriate height 
while pressing the release button. Pull up on  the restraint to make sure it is locked 
in position.
■Changing the Rear Center Seat Head Restraint Positions
■Removing and Reinstalling the Head Restraints
Front and rear center head restraints
1 Removing and Reinstalling the Head Restraints
3WARNING
Failure to reinstall, or  correctly reinstall, the 
head restraints can result in severe injury 
during a crash.
Always replace the he ad restraints before 
driving.
18 CLARITY FUEL CELL PPO-31TRT6100.book  175 ページ  2017年11月21日 火曜日 午後3時3分 
     
        
        Page 484 of 551

uuCleaning uInterior Care
482
Maintenance
The front and rear floor mats hook over floor 
anchors, which keep them from sliding 
forward. To remove a  mat for cleaning, turn 
the anchor knobs to the unlock position. 
When reinstalling the mat after cleaning, turn 
the knobs to the lock position.
Do not put additional  floor mats on top of 
the anchored mats.
To properly clean leather:
1. Use a vacuum or soft dry cloth first to remove any dirt or dust.
2. Clean the leather with a soft cloth dampen ed with a solution comprised of 90% 
water and 10% neutral soap.
3. Wipe away any soap residu e with a clean damp cloth.
4. Wipe away residual water and allow  leather to air dry in the shade.
■Floor Mats1Floor Mats
If you use any floor mats  that were not originally 
provided with your vehicle, make sure they are 
designed for your specific ve hicle, fit correctly, and 
are securely anchored by the floor anchors.
Position the rear seat floor mats properly. If they are 
not properly positioned, the  floor mats can interfere 
with the front seat functions.
Unlock
Lock
■Maintaining Genuine Leather1 Maintaining Genuine Leather
It is important to clean or  wipe away dirt or dust as 
soon as possible. Spills can  soak into leather resulting 
in stains. Dirt or dust ca n cause abrasions in the 
leather. In addition, pl ease note that some dark 
colored clothing can rub  onto the leather seats 
resulting in discol oration or stains.
18 CLARITY FUEL CELL PPO-31TRT6100.book  482 ページ  2017年11月21日 火曜日 午後3時3分