2018 HONDA ACCORD SEDAN ECO mode

100
uuIndicators u
Instrument Panel
*1:Models without adaptive damper system
*2:Models with adaptive damper system
IndicatorNameOn/BlinkingExplanationMessage
ECON Mode
Indicator
•Comes on when you press the
ECON button.
2ECON Button P. 475
*1
*2
18 ACCORD HYBRID-31TWA6000.book 100 ページ ２０１８年１月３０日　火曜日　午後７時３８分

108
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
Driver Information Interface Warning and Information Messages
The following messages appear only on the driver information interface. Press the (home) button, select Warnings , then press the left
selector wheel to see the message again with the system message indicator on.
MessageConditionExplanation
•Appears when the vehicle is no longer able to run
due to a malfunction.•Immediately stop in a safe place.
• Have your vehicle checked by a dealer immediately.
• Appears when there is a risk that the vehicle will
move unexpectedly after you have stopped due to a
malfunction with the vehicle.•While the vehicle is stoppe d, apply the parking brake.
• Have your vehicle checked by a dealer.
• Appears when you set the power mode to ON again
and the vehicle is able to run.
2 Turning on the Power P. 458
18 ACCORD HYBRID-31TWA6000.book 108 ページ ２０１８年１月３０日　火曜日　午後７時３８分

110
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
MessageConditionExplanation
•Appears when the engine oil pressure is low.•Appears while driving - Immediately stop in a safe
place.
2 If the Low Oil Pressure Symbol Appears P. 644
•Appears if there is a problem with the shutter grille,
and the radiator coolant temperature is too high.•Power output will be reduced, so you may not be able
to accelerate or maintain yo ur current speed. Have your
vehicle checked by a dealer.
• Appears when the washer fluid is low.
•Refill the washer fluid.
2 Refilling Window Washer Fluid P. 588
•Appears when the scheduled maintenance is due
soon.
• Consequently, Maintenance Due Now and
Maintenance Past Due follow.
2Maintenance Minder Messages on the Driver
Information Interface P. 571
Canadian models
18 ACCORD HYBRID-31TWA6000.book 110 ページ ２０１８年１月３０日　火曜日　午後７時３８分

113
uuIndicators uDriver Information Interface Wa rning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
•Appears when the parking brake is applied
automatically while it is in operation.
2 Automatic Brake Hold P. 544
2 Parking Brake P. 539
•Appears when the electric parking brake switch is
pressed without depressing the brake pedal while
the electric parking brake is in operation.• Press the electric parking brake switch with the brake
pedal depressed.
2 Parking Brake P. 539
•Appears after you set the power mode to
ACCESSORY or ON.
• Appears after you unlock and open the driver’s
door.
2 Turning on the Power P. 458Canadian models
18 ACCORD HYBRID-31TWA6000.book 113 ページ ２０１８年１月３０日　火曜日　午後７時３８分

114
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
MessageConditionExplanation
•Appears when the power mode is in ACCESSORY.
—
•Appears after the driver’s door is opened when the
power mode is in ACCESSORY.• Press the POWER button twice with your foot off the
brake pedal to change the power mode to VEHICLE
OFF.
• Appears when you close the door with the power
mode in ON without the smart entry remote inside
the vehicle.•Disappears when you bring the smart entry remote
back inside the vehicle and close the door.
2 Smart Entry Remote Reminder P. 190
•Appears when the smart entry remote battery
becomes weak.•Replace the battery as soon as possible.
2 Replacing the Button Battery P. 611
18 ACCORD HYBRID-31TWA6000.book 114 ページ ２０１８年１月３０日　火曜日　午後７時３８分

115
uuIndicators uDriver Information Interface Wa rning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
•Appears if the smart entry remote battery is too
weak to turn on the power system or the key is not
within operating range to turn on the power system.
A beeper sounds six times.• Bring the smart entry remote in front of the POWER
button to be touched with.
2 If the Smart Entry Remote Battery is Weak P. 637
•Appears as soon as a problem is detected in the
smart entry system or push button starting system.•Appears constantly - Have your vehicle checked by a
dealer.
• Appears if you press the POWER button while the
vehicle is moving.• The message will disappear after six seconds or when
the power mode is set to VEHICLE OFF.
18 ACCORD HYBRID-31TWA6000.book 115 ページ ２０１８年１月３０日　火曜日　午後７時３８分

117
uuIndicators uDriver Information Interface Wa rning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
•Appears when you set the power mode to OFF while
driving.•Immediately stop in a safe place, set the parking brake,
then restart the power system. If the message
disappears, continue driving.
• Appears if the vehicle is stopped and the driver’s seat
belt is unfastened, as there is a possibility that the
vehicle may roll.•When the vehicle is idling or when you are parking or
exiting the vehicle, put the transmission into
(P before
releasing the brake pedal.
2 Shift Operation P. 467
•Appears when you put the transmission into (N,
then release the
(N button.
2 If you want to keep the transmission in (N
position [car wash mode] P. 469
18 ACCORD HYBRID-31TWA6000.book 117 ページ ２０１８年１月３０日　火曜日　午後７時３８分

118
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
MessageConditionExplanation
•Appears when you try to change the shift position
without releasing your foot off the accelerator pedal.•Release your foot off the acce lerator pedal, then select
a shift button.
• Appears when the (P button is pressed while the
vehicle is moving.
• Appears if you put th e transmission into
(R while
the vehicle is moving forward, or into
(D while the
vehicle is reversing.
• Make sure that the vehicle comes to a stop before
operating the select button.
• Appears when you set the power mode to ON
without fastening the driver’s seat belt.
• Appears when you change the shift position after
(P has been automatically selected with the driver’s
door open, the driver’s seat belt unfastened, then
the brake pedal is released.
• Fasten the seat belt properly before you start to drive.
2 Shift Operation P. 467
•Appears when you try to change the shift position
without depressing the brake pedal.•Depress the brake pedal, then select a shift button.
18 ACCORD HYBRID-31TWA6000.book 118 ページ ２０１８年１月３０日　火曜日　午後７時３８分