2018 FORD FOCUS ELECTRIC service

[x] Cancel search: service

Page 220 of 375

FORD FOCUS ELECTRIC 2018  Owners Manual If you need to use a jack or hoist to service
your vehicle, make sure the lift pads do not
contact the high voltage battery or support
brace.
The high voltage battery and support brace
are very close

Page 224 of 375

FORD FOCUS ELECTRIC 2018  Owners Manual CAPACITIES AND
SPECIFICATIONS WARNING
The air conditioning refrigerant
system contains refrigerant under
high pressure. Only qualified
personnel should service the air
conditioning refrigerant system.

Page 235 of 375

FORD FOCUS ELECTRIC 2018  Owners Manual •
SOUND: Press to access the Sound
menu where you can adjust sound and
other audio settings.
• 1-6:
 Press and hold to store or press to
select an AM, FM or SIRIUS memory
preset.  See Audio System

Page 236 of 375

FORD FOCUS ELECTRIC 2018  Owners Manual •
You must pair and connect a
Bluetooth-enabled and compatible
cell phone to SYNC.
• A connected Bluetooth-enabled phone
must have the ability to make and
maintain an outgoing call at the time
of

Page 237 of 375

FORD FOCUS ELECTRIC 2018  Owners Manual •
Do not attempt to service or repair the
system.  Have an authorized dealer
check your vehicle.
• Do not operate playing devices if the
power cords or cables are broken, split
or damaged. Place c

Page 238 of 375

FORD FOCUS ELECTRIC 2018  Owners Manual Creating an Owner Account
Why do I need an owner account?
•
Essential for keeping up with the latest
software and connected features.
• Access to customer support for any
questions you may have.

Page 250 of 375

FORD FOCUS ELECTRIC 2018  Owners Manual There are two preset banks available for
AM and three banks for FM. To access
additional presets, tap the preset button.
The indicator on the preset button shows
which bank of presets you are currentl

Page 252 of 375

FORD FOCUS ELECTRIC 2018  Owners Manual Troubleshooting tips
Action
Cause
Message
No action required. This
message should disappear
shortly.
Radio requires more than two
seconds to produce audio for
the selected channel.
Acquiring Signal
If