KNOWING YOUR CAR
66
Media mode
This chapter describes the ways of
interacting with AUX (where provided)
and USB operation.
Change track (next/previous)
Briefly press the
»button or turn the
BROWSE ENTER button/knob
clockwise to play the next track or
briefly press the
”button or turn the
BROWSE ENTER button/knob
anticlockwise to return to the beginning
of the selected track or to the
beginning of the previous track if this
has been played for less than 3
seconds.
Fast forward/rewind tracks
Press and hold down the
»button
to fast forward the selected track or
keep the
”button pressed to fast
rewind the track.Select track (Browse)
Use this function to scroll through and
select the tracks on the active device.
The choices available depend on the
device connected.
For example, on a USB device you can
also scroll through the list of artists,
genres and albums available on the
device depending on the information
present on the tracks using the
BROWSE ENTER button/knob.
Within each alphabetical list, the
A-B-Cbutton on the front panel allows
the user to skip to the desired letter in
the list.
NOTE This button might be disabled
for some Apple®devices.
NOTE The BROWSE ENTER button
does not allow any operation on an
AUX device (where provided).
Press the BROWSE ENTER button to
activate this function on the source
being played.
Turn the BROWSE ENTER
button/knob to select the desired
category and then press the
button/knob to confirm the selection.
Press the
Nbutton to cancel the
function.Audio source selection
Press the MEDIAbutton to select the
desired audio source from those
available: AUX (where provided) or
USB.
Track information display
Press the INFObutton to select the
information displayed while playing
(Artist, Album, Genre, Name, Folder,
File name).
Press the
Nbutton to exit the screen.
Shuffle
Press the button to play the
tracks on USB in a random order.
Press again to deactivate the function.
Repeat
Press the button to activate this
function.
Press again to deactivate the function.
71
ButtonInteraction (pressure/rotation)
❒Answer incoming call
❒Answer second incoming call and put the active call on-hold
❒Show last 10 calls on the instrument panel (only with call browsing active and the phone ready)
❒Reject incoming call
❒End call in progress
❒Exit last call display on instrument panel (with call browsing active only)
❒Deactivate/reactivate microphone during a phone call
z ❒Activate/deactivate USB, Bluetooth® source Pause
❒Activate/deactivate radio Mute function
+/– Short press: turn volume up/down in single steps
Long press: turn volume up/down continuously until released
❒Activate voice recognition
} ❒Interrupt voice message in order to give a new voice command
❒Interrupt voice recognition
❒Short press (Radio mode): select next/previous station
NO ❒Long press (Radio mode): scan higher/lower frequencies until released
❒Short press (USB Bluetooth® mode): selection of previous/next track
❒Long press (USB Bluetooth® mode): fast forward/rewind until released
❒Short press (phone mode): select next/previous call (with call browsing active only)
£
£
Front panel control summary table
KNOWING YOUR CAR
72
Switching the
system on/off
The system is switched on/off by
pressing the g(ON/OFF) button/knob.
Turn the button/knob clockwise to
increase the radio volume or
anticlockwise to decrease it.
Radio mode
After the desired radio station is
selected, the following information is
shown on the display:
At the top: the list of radio stations
stored (presets) is displayed; the station
currently playing is highlighted.
In the middle: display of the name of
the current radio station and the
buttons for selecting the previous or
next radio station.
At the bottom: display of the following
buttons:
❒ “Browse”: list of the radio stations
available;
❒ “AM/FM”, “AM/DAB”, “FM/DAB”:
selection of the desired frequency
band (button reconfigurable
according to the band selected:
AM, FM or DAB);❒ “Tune”: manual radio station tuning
(not available for DAB radio);
❒ “Info”: additional information on the
source being listened to;
❒ “Audio”: access to the “Audio
setting” screen.
Audio menu
The following adjustments can be
carried out using the “Audio” menu:
❒ “Equalizer” (for versions/markets,
where provided);
❒ “Balance” (left/right audio balance
adjustment);
❒ “Volume / Speed” (speed-
dependent automatic volume
control);
❒ “Loudness” (for versions/markets,
where provided);
❒ “Auto-On Radio”;
❒ “Radio Off Delay”.
To exit the “Audio” menu, press the
/ Done graphic button.
Media mode
Audio source selection
Press the "Source" button to select the
desired audio source among those
available: AUX (where provided), USB
or Bluetooth®.
NOTE Applications used on portable
devices may be not compatible with
the Uconnect™ system.
Track selection (Browse)
With Media mode active, briefly press
the
”/ »graphic buttons to play
the previous/next track or keep the
”/ »buttons pressed to fast
rewind/forward the track.
NOTE The keyboard is not available for
languages not supported by the
system which feature special
characters (e.g. Greek). In these cases
this function will be limited.
75
Press the button to access the list of
text messages received by the mobile
phone (the list displays a
maximum of 60 messages received).
NOTE On some mobile phones, to
make the text message voice reading
function available, the text message
notification option on the phone must
be enabled. This option is usually
available on the phone, in the
Bluetooth® connections menu for a
device paired as Uconnect™. After
enabling this function on the mobile
phone, it must be disconnected and
reconnected with the Uconnect™
system in order to make it effective.
SMS message options
Default text messages are stored in the
system memory and can be sent to
answer a received message or as a
new message:
❒ Yes.
❒ No.
❒ Okay.
❒ I can't talk right now.
❒ Call me.
❒ I'll call you later.
❒ I'm on my way.
❒ Thanks.❒ I will be late.
❒ Stuck in traffic.
❒ Start without me.
❒ Where are you?
❒ Are you there yet?
❒ I need directions.
❒ I'm lost.
❒ See you later.
❒ I will be 5 (or 10, 15, 20, 25, 30, 45,
60)* minutes late.
❒ See you in 5 (or 10, 15, 20, 25, 30,
45, 60)* minutes.
* Only use the numbers listed,
otherwise the system will not take the
message.
NOTE See the dedicated section for
details on how to send a text message
using the voice commands.
APPS Mode
Introduction
Press the APPS button on the front
panel to display the following operating
settings:
❒ Outside Temp
❒ Clock
❒ Compass❒ Trip
❒ Uconnect™ LIVE
Uconnect™ LIVE
Services
Press the APPS button to access a
radio menu which shows all the
application functions of the system,
such as:
Trip computer, Settings, Compass (for
versions/markets, where provided),
Uconnect™ LIVE applications.
If there is a Uconnect™ icon, the
system is set up for the connected
services and allows the applications to
be used directly from the radio, for a
more efficient and advanced use of the
vehicle. The application functions are
present according to the vehicle
configuration and to the market.
To use the Uconnect™ LIVE services
it is necessary to:
❒ Download the Uconnect™ LIVE
App from the “App Store” or
“Google play” on your compatible
smartphone, making sure that the
data connection is enabled.
❒ Register on Uconnect™ LIVE App,
www.DriveUconnect.eu or in the
site www.fiat.it.
KNOWING YOUR CAR
78
Recording and transferring
trip data
The trip data can be stored in the
system memory and transferred using
a suitably configured USB memory
stick or by Uconnect™ LIVE app.
This allows you to display the history of
the collected data, showing the
complete analysis of the trip data and
of your driving style.
Further information is available at
www.driveuconnect.eu.
IMPORTANT Do not remove the USB
memory stick nor unpair the
smartphone and the Uconnect™ LIVE
App before the system has
downloaded the data, otherwise it
could be lost.
During the transfer of data to the
devices, messages may appear on the
radio display to guide the user
correctly through the operation; follow
these instructions. These messages
are only displayed with the ignition key
at STOP and when a delay in the
system switching off is set.
The data are automatically transferred
to the devices when the engine is
switched off. Transferred data will be
deleted from the system memory in
this manner. You can choose to store the trip data
or not, by pressing the “Settings”
button and by setting the storage
activation and the USB or Cloud
transfer mode.
REMARKS
When the USB memory stick is full, the
warning messages are shown on the
radio display.
When the eco:Drive™ data are not
transferred to USB memory stick for a
long time, the internal memory of the
Uconnect™ LIVE system may be
exhausted. Follow the instructions
given by the messages on the radio
display.
my:Car
my:Car allows you to keep the “health”
of your vehicle always under control.
my:Car can detect malfunction in real
time and inform the user about the
expiry of the servicing interval. Press
the “my:Car” button to interact with the
application.
The display will show a screen with the
“care:Index” section, which provides all
the detailed information about the
status of the vehicle. Press the “Active
warnings” button (if present) to showthe details of the vehicle’s faults which
caused a warning light to switch on.
The vehicle status can be seen both
on www.driveuconnect.eu or through
the Uconnect™ LIVE app.
Settings
Press the button on the front
panel to display the main “Settings”
menu.
NOTE The menu items displayed vary
according to the versions.
Indicatively, the menu is composed of
the following items:
❒ Display;
❒ Units;
❒ Voice commands;
❒ Clock & Date;
❒ Safety;
❒ Lights (for versions/markets, where
provided);
❒ Doors & Locks;
❒ Vehicle Off Options;
❒ Audio;
❒ Phone/ Bluetooth;
87
ButtonsInteraction
❒Answer incoming call
❒Answer second incoming call and put the active call on-hold
❒Show last 10 calls on the instrument panel (only with call browsing active and the phone ready)
❒Activate voice recognition
} ❒Interrupt voice message in order to give a new voice command
❒Interrupt voice recognition
❒Long press: interaction with Siri, Apple CarPlay and Android Auto
❒Reject incoming call
❒End call in progress
❒Exit last call display on instrument panel (with call browsing active only)
NO ❒Short press (phone mode): selection of next/previous call (only with call browsing active)
£
£
STEERING WHEEL CONTROL SUMMARY TABLE
KNOWING YOUR CAR
88
Switching the
system on/off
The system is switched on/off by
pressing the gbutton/knob.
Turn the button/knob clockwise to
increase the radio volume or
anticlockwise to decrease it. The
electronic volume adjustment control
rotates continuously (360°) in both
directions, without stop positions.
Radio mode
After the desired radio station is
selected, the following information is
shown on the display:
At the top: the list of radio stations
stored (presets) is displayed; the
station currently playing is highlighted.
In the middle: display of the name of
the current radio station and the
buttons for selecting the previous or
next radio station.
On the left: display of the “AM”, “FM”,
“DAB” buttons for selecting the desired
frequency band (reconfigurable button
depending on the selected band: AM,
FM or DAB);On the right : display of the following
buttons:
❒ “Info”: additional information on the
source being listened to;
❒ “Map”: navigation map view
(Uconnect™ 7” HD
Nav LIVEversions only).
At the bottom: display of the following
buttons:
❒ “Browse”: list of the radio stations
available;
❒
÷/ ˜: selection of the
previous/next radio station;
❒ “Tune”: manual radio station tuning;
❒ “Audio”: access to the
❒ “Audio Settings” screen.
Audio menu
To access the “Audio” menu press the
“Audio” button located at the bottom
of the display. The following adjustments can be
carried out using the “Audio” menu:
❒ “Balance & Fader” (left/right and
front/rear audio balance
adjustment);
❒ “Equalizer” (where provided);
❒ “Speed Adj Volume” (speed-
dependent automatic volume
control);
❒ “Loudness” (where provided);
❒ “AUX Volume Offset”
(where provided) (off in radio mode,
selectable only with the AUX
source active);
❒ “AutoPlay”;
❒ “Auto-On Radio”.
Media mode
Press the "Media" button to select the
desired audio source among those
available: USB, Bluetooth®, AUX
(where provided).
IMPORTANT Applications used on
portable devices may be not
compatible with the Uconnect™
system.
After Media mode is selected, the
following information is shown on the
display:
121
IMPORTANT Reverse can only be
engaged when the vehicle is
completely stationary. With the engine
running, wait for at least 2 seconds
with the clutch pedal fully pressed
before engaging reverse to prevent
damage to the gears and grating.
To engage reverse R from neutral, lift
the sliding ring A-fig. 87 under the
knob and shift the lever to the right and
back.
IMPORTANT The clutch pedal should
be used only to change gear. Do not
drive with your foot resting on the
clutch pedal, however lightly. For
versions/markets, where provided, the
electronic clutch control could cut in,
interpreting the incorrect driving style
as a fault.USING THE
DUALOGIC
GEARBOX 14)
(for versions/markets, where provided)
OPERATING MODE
The gearbox/transmission can function
in two operating modes:
❒ MANUAL the driver decides when
to shift gear;
❒ AUTO the system decides when to
shift gear.
MANUAL MODE
❒ Press the brake pedal and start the
engine.
❒ Push the gear lever A-fig. 88
towards (+) to engage the first gear
(if it is coming from N or R, simply
place the lever in the middle
position) or in R to engage reverse
gear.
❒ Release the brake pedal and press
the accelerator pedal.
❒ In driving conditions, push lever A of
the gearbox towards (+) to engage
the next gear up or towards (–) to
engage the next gear down.
AUTO MODE
❒ Press the brake pedal and start the
engine.
❒ Push the gear lever to A/M to
engage automatic mode or to R to
engage reverse gear.
❒ Release the brake pedal and press
the accelerator pedal.
88DVDF0S0192c