2018 DODGE CHARGER SRT service

[x] Cancel search: service

Page 284 of 490

DODGE CHARGER SRT 2018  Owners Manual 3. Once a connection between the vehicle and a SOSoperator is made, the SOS Call system may transmit the
following important vehicle information to a SOS op-
erator:
• Indication that the occupant p

Page 285 of 490

DODGE CHARGER SRT 2018  Owners Manual WARNING!(Continued)
Emergency Services Agent. All occupants should exit
the vehicle immediately and move to a safe location.
• Never place anything on or near the vehicle’s oper-
able network and

Page 286 of 490

DODGE CHARGER SRT 2018  Owners Manual WARNING!
•Ignoring the Rearview Mirror light could mean you
will not have SOS Call services. If the Rearview
Mirror light is illuminated, have an authorized
dealer service the SOS Call system immedi

Page 288 of 490

DODGE CHARGER SRT 2018  Owners Manual Bulb Number
Glove Compartment
Lamp – If Equipped 194
Door Courtesy 562
Shift Indicator Lamp JKLE14140
Center High-Mount Stop
Lamp (CHMSL) LED (Serviced At Autho-
rized Dealer)
Optional Door Map
Pock

Page 289 of 490

DODGE CHARGER SRT 2018  Owners Manual Replacing Exterior Bulbs
Front Low/High Beam Headlamp And Park/Turn
Lamp — Models With Halogen Headlamps
1. Open the hood.
NOTE:Removal of the air cleaner filter housing may be
necessary prior to re

Page 290 of 490

DODGE CHARGER SRT 2018  Owners Manual Front/Rear Side Marker Lamp
The Side Markers use LED lamps that are not serviceable
separately. The Side Markers must be replaced as an
assembly, see your authorized dealer.
Front Fog Lamp
The Front F

Page 291 of 490

DODGE CHARGER SRT 2018  Owners Manual 4. Squeeze the two tabs on the side of the bulb socket andpull straight out from the lamp assembly.
5. Disconnect the bulb from the wiring connector and install the replacement bulb.
6. Install the bu

Page 303 of 490

DODGE CHARGER SRT 2018  Owners Manual TIRE SERVICE KIT — IF EQUIPPED
Small punctures up to 1/4 inch (6 mm) in the tire tread can
be sealed with Tire Service Kit. Foreign objects (e.g., screws
or nails) should not be removed from the tir