2018 CHEVROLET VOLT air condition

4
GETTING STARTED
REMOTE KEYLESS ENTRY (RKE)
The RKE transmitter performs several remote functions and must be inside\
the vehicle to
operate the Volt.
Keyless Access
With the RKE transmitter within 3 ft. (1 m) of the door, press the button on the door handle to unlock the door. Press it again within 5 seconds to unlock all doors.
Key Release
Press the button on the side of the transmitter to remove the key, which can be used to unlock the driver’s door.
Unlock
Press to unlock the driver’s door. Press again to unlock all doors.
Press and hold to lower all windows from outside the vehicle.
To turn the window feature on/off, select Settings > Vehicle > Remote Lock, Unlock, Start > Remote Window Operation.
Lock
Press to lock all doors.

Remote Start
Press the Lock button and then press and hold the button until the turn signal lamps flash to start the vehicle and condition the passenger cabin temperature from outside. The heat-ing or air conditioning system and rear window defogger (if needed) will turn on. Depending on conditions and vehicle personalization settings, the engine may start.
After entering the vehicle, press the brake pedal and then press the POWER button before driving.
Note:
• Press and hold the Remote Start button until the parking lamps turn off to cancel a remote start.
• Only two remote starts are allowed between ignition cycles.
• It’s RECOMMENDED to use this feature when the vehicle is plugged in to allow energy from the wall outlet to assist in getting the cabin to a comfortable temperature and to leave more battery energy for driving.
Panic Alarm
Press and release to locate the vehicle.
Press and hold for 3 seconds to sound the panic alarm.
See Keys, Doors and Windows in your Owner’s Manual.

5
STARTING THE VEHICLE/ON
With the vehicle in Park or Neutral, press the brake pedal and then press the POWER button. A power ON audio cue will sound.
The vehicle will not shift out of Park and a Charge Cord Connected message will display if the vehicle is still plugged in.
When ON, the instrument cluster will display a green READY READY icon on the bottom of the screen. The engine will start only if needed.
STOPPING THE VEHICLE/OFF
Shift to Park and then press the POWER button. A power OFF audio cue will sound.
CONDITIONS FOR ENGINE STARTING
When vehicle power is ON, the engine may start independent of the vehicl\
e being plugged in or completely charged. Conditions that may cause the engine t\
o start include:
GETTING STARTED
POWER BUTTON
The Volt features an electronic push-button start. The POWER button flashes when the driver’s door is opened upon entry. Once the vehicle is ON, the butto\
n illuminates.
Note: The air conditioning compressor, pumps and fan may run at any time, even when the vehicle is OFF, to cool or warm the propulsion battery.
STEERING WHEEL AND SEAT ADJUSTMENT
Before driving, adjust the steering wheel and seat to a comfortable posi\
tion.
Pull down the lever (A) to unlock the steering wheel and adjust its position.
Lift the handle (B) under the right-front side of the seat to slide the seat forward or rearward.
Ratchet the side lever (C) up or down to raise or lower the seat.
Lift the rear lever (D) to adjust the seatback.
See Seats and Restraints in your Owner’s Manual.
• Propulsion battery charge is low
• Propulsion battery temperature is hot or cold
• Cold ambient temperatures (depending on engine-assisted heating options; see Vehicle Personalization on page 10)
• Hood is open
• Engine and Fuel Maintenance Modes (occur only if the engine has had very limited operation over a long period)
See Driving and Operating in your Owner’s Manual.
B
CD
A

9
CLIMATE CONTROLS
CLIMATE SETTINGS
There are 3 climate mode settings. Each setting impacts the vehicle’s\
electric range or fuel economy. The mode settings below are listed from most to least effi\
cient.
Fan Only – Turn off the eco and MAX modes (button indicators are off). The \
air condi-tioning and electric heating are turned off.
eco – Press the eco button (green button indicator) for limited air conditioning or
electric heating, balancing comfort with energy use.
MAX – Press the MAX button (amber button indicator) to have the air conditioning or electric heating cool/heat the cabin as quickly as possible but also use\
more energy.
MAXIMUM DEFROST
To defrost the windshield and rear window as quickly as possible (uses the most energy):
1. Press MAX.
2. Press MAX MAX Defrost.
3. Press Rear Window Defogger.
AUTOMATIC OPERATION
1. Select Fan Only, eco, or MAX.
2. Press AUTO.
3. Set the temperature.
If fan speed, air delivery, or recirculation is manually adjusted, automatic operation for that function is turned off.
AUTO HEATED SEATS AND STEERING WHEEL
Use the heated seats and heated steering wheel (if equipped) to reduce\
the demand on the vehicle’s heating system and use less energy.
To turn the auto heated seats on or off, go to Settings > Vehicle > Clim\
ate and Air Quality. The auto heated seats will turn on based on the vehicle’s in\
terior temperature.
To turn the remote start auto heated seats and steering wheel on or off,\
go to Settings > Vehicle > Remote Lock, Unlock, Start.
Note: Under certain conditions, the engine will start to ensure full heat and defrost capability.
See Climate Controls in your Owner’s Manual.
Fan Control
MAX Defrost
MA X
Driver’s Heated Seat Button
Defrost
AUTO Automatic Operationeco Mode
Recirculation ModeTemperature Control
Rear Window Defogger
Air Delivery Controls
Power On/Off
MAX Mode Passenger’s Heated Seat Button