2018 CADILLAC ATS coolant reservoir

Cadillac XTS Owner Manual (GMNA-Localizing-U.S./Canada-12032610) -
2019 - crc - 8/22/18
VEHICLE CARE 241
1.Engine Air Cleaner/Filter 0248.
2. Power Steering Fluid Reservoir (Under Engine Cover) (If
Equipped).
See Power Steering Fluid (LF3 and
LFX with AWD) 0255 orPower
Steering Fluid (LFX with FWD)
0 255.
3. Engine Oil Fill Cap. See Engine Oil
0 244.
4. Engine Oil Dipstick (Out of View). See Engine Oil0244.
5. Engine Cover 0243.
6. Engine Cooling Fans (Out of View). See Cooling System 0250.
7. Brake Fluid Reservoir. See Brake
Fluid 0257.
8. Engine Coolant Surge Tank and Pressure Cap. See Cooling System
0 250.
9. Battery - North America 0258
(Battery Cover not Shown).
10. Remote Positive (+) Terminal (Battery Cover not Shown). See
Jump Starting - North America
0306. 11.
Engine Compartment Fuse Block
0265.
12. Remote Negative (−) Terminal (Out of View). See Jump Starting -
North America 0306.
13. Windshield Washer Fluid Reservoir. See Washer Fluid
0 256.

Cadillac XTS Owner Manual (GMNA-Localizing-U.S./Canada-12032610) -
2019 - crc - 8/22/18
VEHICLE CARE 243
1.Engine Air Cleaner/Filter 0248.
2. Power Steering Fluid Reservoir (Under Engine Cover).
See Power Steering Fluid (LF3 and
LFX with AWD) 0255 orPower
Steering Fluid (LFX with FWD)
0 255.
3. Engine Oil Fill Cap. See Engine Oil
0 244.
4. Engine Oil Dipstick. See Engine
Oil 0244.
5. Engine Cover 0243.
6. Engine Cooling Fans (Out of View). See Cooling System 0250.
7. Charged Air Coolant Bottle and Pressure Cap. See Cooling System
0 250.
8. Brake Fluid Reservoir. See Brake
Fluid 0257. 9. Engine Coolant Surge Tank and
Pressure Cap. See Cooling System
0 250.
10. Battery - North America 0258
(Battery Cover not Shown).
11. Remote Positive (+) Terminal (Battery Cover not Shown). See
Jump Starting - North America
0306.
12. Engine Compartment Fuse Block
0265.
13. Windshield Washer Fluid Reservoir. See Washer Fluid
0 256.
14. Remote Negative (−) Terminal (Out of View). See Jump Starting -
North America 0306.Engine Cover
3.6L V6 Engine
1. Engine Oil Fill Cap
2. Engine Cover Bolt
3. Engine Cover
To remove:
1. Remove the oil fill cap (1).
2. Remove the engine cover bolt (2).
3. Raise the engine cover (3) to release it from the retainers.
4. Lift and remove the engine cover.
5. Reverse Steps 1–4 to reinstall the engine cover.

Cadillac XTS Owner Manual (GMNA-Localizing-U.S./Canada-12032610) -
2019 - crc - 8/22/18
VEHICLE CARE 255
damage. In this mode, there is
significant loss in power and engine
performance.
The engine coolant temperature
warning light comes on in the
instrument cluster, to indicate the
vehicle has entered overheated engine
protection operating mode. The
temperature gauge also indicates an
overheat condition exists. Driving
extended distances and/or towing a
trailer in the overheat protection
mode should be avoided.
Power Steering Fluid
(LF3 and LFX with AWD)
The power steering fluid reservoir is
under the engine cover on the
passenger side toward the rear of the
engine compartment. SeeEngine
Compartment Overview 0240.
When to Check Power Steering
Fluid
It is not necessary to regularly check
power steering fluid unless you
suspect there is a leak in the system
or an unusual noise is heard. A fluid
loss in this system could indicate a
problem. Have the system inspected
and repaired.
How to Check Power Steering
Fluid
Check the level when the engine
is cool.
To check the power steering fluid:
1. Remove the engine cover. Refer toEngine Cover 0243.
2. Wipe the cap and the top of the reservoir clean.
3. Turn the cap counterclockwise and pull it straight up.
4. Wipe the dipstick with a clean rag.
5. Replace the cap and completely tighten it. 6. Remove the cap again and look
at the fluid level on the dipstick.
The fluid level should be
between MIN and MAX on the
dipstick.
What to Use
To determine what kind of fluid to
use, see Recommended Fluids and
Lubricants 0332. Always use the
proper fluid.
Power Steering Fluid (LFX
with FWD)
The vehicle has electric power steering
and does not use power steering fluid.

Cadillac XTS Owner Manual (GMNA-Localizing-U.S./Canada-12032610) -
2019 - crc - 8/22/18
256 VEHICLE CARE
Washer Fluid
What to Use
When windshield washer fluid is
needed, be sure to read the
manufacturer's instructions before
use. If operating the vehicle in an area
where the temperature may fall below
freezing, use a fluid that has sufficient
protection against freezing.
Adding Washer Fluid
The appropriate message will appear
in the Driver Information Center (DIC)
when the fluid level is low.
Open the cap with the washer symbol
on it. Add washer fluid until the tank
is full. SeeEngine Compartment
Overview 0240 for reservoir location.
Caution
.
Do not use washer fluid that
contains any type of water
repellent coating. This can
cause the wiper blades to
chatter or skip.
. Do not use engine coolant
(antifreeze) in the windshield
washer. It can damage the
windshield washer system
and paint.
. Do not mix water with
ready-to-use washer fluid.
Water can cause the solution
to freeze and damage the
washer fluid tank and other
parts of the washer system.
. When using concentrated
washer fluid, follow the
manufacturer instructions for
adding water.
. Fill the washer fluid tank only
three-quarters full when it is
very cold. This allows for
fluid expansion if freezing
(Continued)
Caution (Continued)
occurs, which could damage
the tank if it is
completely full.
Brakes
Disc brake pads have built-in wear
indicators that make a high-pitched
warning sound when the brake pads
are worn and new pads are needed.
The sound can come and go or can be
heard all the time when the vehicle is
moving, except when applying the
brake pedal firmly.
{Warning
The brake wear warning sound
means that soon the brakes will not
work well. That could lead to a
crash. When the brake wear
warning sound is heard, have the
vehicle serviced.