2018 AUDI A5 COUPE display

System settings
Short dialog : when this function is switched on
~ ' a shorter form of the prompts is used.
Command during voice output*1>: this function
is switched on at the factory. When this function
is switched
on~' you can say new commands
during announcements . You do not need to wait
for the signal tone (beep) during an announce ­
ment. When the function is switched off
0, you
need to wait for the signal tone (beep) to say a
new command.
Volume: you can adjust the volume of the
prompts by turning the control knob.
Individual speech training (on ly when the vehi­
cle is stationary): you can adapt the voice recog­
n ition system to yo ur voice or pronunciat ion in
order to improve the system's ability to recognize
your speech. Individual train ing is comprised of
20 speech entries that consist of commands and
sequences of numbers . You can delete the pro­
grammed voice tra ining w ith the
Reset individu·
al speech training
function.
Display brightness
You can adjust the brightness of the Infotain­
ment system display by turning the control knob .
Factory settings
The following functions can be reset to the facto­
ry default settings:
-Sound settings
- Radio
- Media settings
- Jukebox*
- Directory
- Telephone
- Bluetooth and Wi-Fi *
- Navigation settings*
- Navigation and online memory*
- Voice recognition system *
- Shortcut keys
- Message settings*
- Apps*
- Tool tips
1
> Please note that this func tion is not available in Cab rio­
lets.
252
- Audi connect*
- Audi smartphone interface*
You can select the desired functions individually
or a ll at once with the option
Select all entries .
Select and confirm Restore factory settings.
(D Tips
Make sure that not only the settings were de­
leted but also the stored data, if applicable.
Connection manager
Introduction
The connection manager gives you an overview
of your connected devices and their network sta­
tus .
Fig. 225 Connection manager
.,. Select: !MENUI button> Settings > left control
button >
MMI settings > Connection manager.
.,. Select and confirm a menu item.
If a mobile device was already connected and you
select and confirm the corresponding menu item,
the device name and connection mode are dis­
played under the menu
item¢ fig. 225.
You can individually Connect(~) or Disconnect
(0) a paired device.
Primary phone
App lies to: vehicles wi th telepho ne
- Connect new device: search for and connect a
cell phone.
- List of devices already paired : select your cell
phone from the list of all the dev ices that are
already paired.

<( a, ..... N ,....
N ..... 0 \0
3 a,
Secondary phone
Applies to: vehicles with telephone
-Connect new device: search for and connect a
cell phone.
- List of devices already paired: select your cell
phone from the list of all the devices that are
already paired.
Data connection
Applies to vehicles with Audi connect (Infotainment)
- The data connection is made using the embed­
ded SIM card
ll ¢ page 191. You do not need to
adjust any additional settings.
Always follow the information found in
¢(D in
Wi-Fi hotspot on page 197.
MMI connect app
Applies to vehicles with Aud i connect (Infotainment)
Requirement: the Audi MMI connect app must
be installed and open on your mobile device.
- Connect new device: search for and connect a
mobile device (such as a smartphone).
- List of devices already paired: select your mo­
bile device from the list of all the devices that
are already paired.
Audio player
Applies to vehicles with Bluetoot h or Wi-F i a udio player
Bluetooth player*
Requirement : the Bluetooth function and visibili­
ty must be switched on in the MMI
¢ page 254
and on the cell phone.
-Connect new device: press the control knob.
Select
Bluetooth audio player . Search for and
connect a mobile device.
- List of devices already paired: select a Blue­
tooth device from the list of all the devices that
are already paired.
l) S IM card inst alle d in the v ehicle at th e fac to ry .
System settings
Wi-Fi audio player*
Requirement: the Wi-Fi hotspot on the MMI
¢
page 197 and on your cell phone must be
switched on.
- Connect new device: press the control knob.
Search for and connect a Wi-Fi capable device.
-Disconnect Wi-Fi audio player: deactivate the
Wi-Fi on your Wi-Fi capable device. The device
will be automatically removed from the list.
(Q) Note
Always follow the information found in ¢Q) in
Wi-Fi hotspot on page 197.
Directory
Applies to: vehicles with telephone
Display contacts from a cell phone (or an addi­
tional cell phone).
Requirement: no cell phones can be connected to
the MMI using the
Handsfree profile.
-Connect new device: search for and connect a
new cell phone .
-List of devices already paired : select your cell
phone from the list of all the cell phones that
are already paired .
Audi smartphone
Applies to: vehicles with Aud i smartphone interface
-Connect your cell phone to the Audi music in­
terface¢ page 23 7 using a USB adapter
¢page 236, fig. 217 .
-Select your cell phone from the list of cell
phones that have already been connected.
Additional options
Depending on the selected function, you can use
the right control button to access the available
additional options in the connection manager.
.,.
253

System settings
Delete Bluetooth device*
The selected cell phone/mobile device is discon ­
nected from the MMI and is removed from the
list of all devices that are already paired .
Show Bluetooth profiles*
You can Connect or Disconnect the Handsfree ,
Messages *, Dire ctory/contacts
and Bluetooth
audio player
profiles separately.
Bluetooth settings*
- Bluetooth :
select and confirm a setting for the
B luetooth connection v is ibility. Select
Visible
for the MMI to be visible to other dev ices. Se­
lect
Invisible for the MMI to not be vis ible to
other devices. Howeve r, it is still possib le to es­
tablish a Bluetooth connection with paired de­
vic es when the visibility is switched off. Select
Off to turn visibility off. Then a B luetooth con­
nection is not possible .
-Bluetooth audio player: when this function is
switched
on~' the Bluetooth audio player is
available as a source in the
Media menu .
-Bluetooth name : the MMI Bluetooth name (for
example ,,AUDI MM I
2016") is displayed and
can be changed .
Online settings*
- Data usage counter :
the amount of data pack ­
ets that are sent and received through the MMI
is disp layed. You can reset the data usage infor­
mation to zero using the
Reset data counter
option.
-Network status : the mobile network provider
for data service as well as the network status
are displayed .
Wi-Fi settings*
See <=> page 19 7, Wi-Fi hotspot.
Storing as a default telephone
Applies to: veh icles with telephone
Requirement: a cell phone must be connected to
the MMI
<=> page 178.
As soon as the cell phone is in range and the
Bluetooth function on the cell phone and in the
MMI is swit ched on, this cell phone is given pr ior­
ity ove r the other Bluetooth devices and is con-
254
nected directly to the MMI. The connected ce ll
phone is displayed first in the device list .
Network settings*
- Login :
you can chose an automatic log in to
your cell phone service provider's network, or
you can choose a
manual login from the list of
avai lab le networks .
-Network selection: available networks in the
present location can be selected under network
selection . This function is on ly availab le for the
Manual l ogin setting.
Apple CarPlay sound settings/ Android Auto
sound settings
Applies to: vehicles with Audi sma rtphone interface
See ~page255.
About Apple CarPlay/ About Android Auto
Applies to: vehicles with Audi smartphone interface
Here you wi ll find legal information regarding
the use of Apple CarPlay or Andro id Auto and in­
formation about device-specific data exchange.
Delete CarPlay device/Delete Android Auto
device
Applies to: vehicles with Audi smartphone interface
Requirement: your cell phone must not be con­
nected to the Audi music interface with a USB
adapter .
Se lect:
Audi smartphone > a device from the list
> r ight control button.
T o remove your cell phone from the list, select
and confirm
Delete CarPlay device or Delete An­
droid Auto device .
System update
"Select: !M ENUI button> Settings > left control
button >
System maintenance .
- System update:
slide the storage device with
the update data into the appropriate drive
<=> page 231 . Select and confirm the dr ive>
Start update . The length of the process de­
pends on the size of the update .
-Reset driver installation: the selected media
dr iver package is reset to the settings at the
time of delivery.

<( a, .... N ,....
N .... 0 \0
3 a,
-Version information : information on the MMI
software version and the navigation database *
software version is displayed . The
Software in­
format ion
function a lso provides information
on the software contained in the MMI and the
licensing agreement .
Sound settings
The sound distribution and volume of the MMI
can be adjusted individually . The settings depend
on vehicle equipment.
Fig. 226 Adjusti ng the balance/fader
" Se lect: I MENU I button> Sound > left contro l
button
> Entertainment .
Treble / Bass
You can adjust the Treble and Bass settings by
turning the control knob. The changed settings
only apply fo r the audio source that is act ive at
the time. This allows you to adjust the sound set­
tings for each audio source separately .
Balance/fader (Sound focus)
-Adjusting the sound distribution to the left or
right :
press the control knob. Turn the control
knob to the left or right to the desired position .
-Adjusting the sound distribution to the front
or rear:
press the control knob again. Turn the
contro l knob to the left o r right to the desired
position.
-Adjusting the sound distribution using the
MMI touch* :
move your finger on the MMI
touch control panel in the desired direction.
Sound effects
Select and confirm a Focus sett ing:
-All : all speakers in the vehicle are active (sym­
metr ical sound distribution) .
System settings
-Front: only the speakers in the front of the ve­
hicle are active.
-Rear* : only the speakers in the rear of the vehi-
cle are active .
Select and confirm a
30 effect* setting (surro und
sound):
-Off : the 3D effect is switched off.
-Low : the 3D effect is optimized, for example
for aud io books .
-Medium : the 3D effect is optimized for all sour-
ces.
-High : the 3D effect is at the maximum .
Subwoofer*
Turn the cont rol knob to adjust the subwoofer .
Speed dependent volume control
Turn the control knob to adjust the playback vol­
ume to the noise ins ide the veh icle.
Volume settings
Adjusting the volume
The volume of an audio source or a system mes­
sage (for example, from the voice recognition
system*) can be adjusted directly while the
sound is playing using the On/Off knob.
-Increasing or decreasing the volume : turn the
On/Off knob
(D ~ page 158, fig. 162 to the
r ight or left.
-Muting or pausing: press the On/Off knob
briefly .
Or: turn the On/Off knob to the left un­
til the
symbol @~ page 168 appears. An ac­
tive audio/video source is stopped .
-Unmuting or resuming: press the On/Off knob
briefly .
Or: turn the On/Off knob to the right.
A WARNING ~
To reduce the risk of an accident, adj ust the
volume of the a udio system so that audible
signals from outside the vehicle, such as po­ lice and fire sirens, can be heard easily at all
times.
-
255

System settings
(D Tips
Volumes that are too h igh o r too low are a u­
tomatically a djuste d to a set leve l w hen the
MM I is switched on .
Adjusting the system volume
.,. Select : I MENU I button > Sound > left contro l
button .
Telephone
App lies to: ve hicles w ith t elep hone
Mute telephone: messages and ringtones are set
to mute.
Ringtone : see¢ page 188, Ringtone and volume
settings .
Ringtone volume :
you ca n adjust the volume of
the se le cte d r ing to ne by tur ning the con tro l
knob.
Me ssage volume : you ca n ad just t he volume of
the not ifi cat io n for an in comi ng tex t me ssage by
tur ning t he con trol kno b.
Microphone input level : you can adjust the call
volume du ring a phone ca ll by tu rning the co ntro l
knob.
Navigation
A pp lies to: ve hicles w ith navigation system
Voice guidance: see ¢ page 216 .
Voice guidance during phone call: see
¢ page 216.
Voice guidance volume : you can ad just the vo ice
gu idance volume by tur ning the control kno b.
Or :
you can ad just the vo ice gui dance volume during
active route g uidance by turning the On/Off
knob.
Enterta inment fader : the volume of au dio play ­
bac k can be tempo rarily lowe red w hen the pa rk­
ing system or voice g uidance is active .
Voice recognition system
Applies to: ve hicles w ith vo ice recogni tion sys te m
Command display : see ¢page 251.
Short dialog : see¢ page 251 .
256
Volume: see¢ page 251 .
Individual speech training: see ¢ page 2 51.
Parking aid*
You can adjust the vol ume of the sig na l tone by
turning the co ntro l knob.
- Adjusting the Front volume : select and con­
firm
High , Medium or Low .
- Adjusting
th e Rear volume : select a nd confirm
High , Medium or Low .
MMI touch volume*
You c an adjus t the vol ume of the prompt s for t he
M MI tou ch * by t urning the control knob .
Restarting the MM I
Fig. 22 7 Butto n co mbin at ion to res ta rt t he syste m
.,. Briefly p ress the cont rol knob and bo th bu ttons
at the same time to imm ediately open t he
m enu upward
¢fig. 227 .
Software license
information
Information on the software contained in the
MMI and the license agreement .
-Sele ct: !ME NUI but ton> Settings > left co ntr ol
bu tton >
System maintenance > Version infor ­
mation.
- Or :
onli ne a t www.audiusa. com/softwareinfo .
Information on the software contained in the head-up display and the license agreement.
- Req uiremen t: the vehicle mus t be s ta tionary .
- P ress the contro l knob to close t he i nformat io n.
Or : sta rt driv ing.

Checking and Filling
an authorized Audi dealer or authorized Audi
Service Facility for assistance .
Fuel filler door emergency release
If the central locking system is faulty, the fuel
filler door can be unlocked manually.
F ig. 270 Luggage compartment: open ing the s ide tr im
panel
F ig. 271 luggage compartment: fuel fi ller door emergency
release
The emergency opening mechanism is located behind the right s ide trim panel in the luggage
compartment.
• Open the cover in the side pane l ¢fig. 270.
• Loosen the loop <=>fig . 271 from the retainer
and then pull on the loop carefully
<=> 0 . Th e
filler door is released.
• P ress on the left side of the fuel fi ller door to
open
i t¢ page 324, fig. 268 .
(D Note
Only pull on the loop until you feel resistance .
You will not hear it release. O therwise yo u
co uld damage the eme rgency re lease mecha­
nism .
326
Selective catalytic
reduction (AdBlue/DEF)
General information
Applies to: vehicles with selective catalytic reduct ion
In vehicles with selective catalytic reduction, a
urea solution (AdBlue/DE F) is injected into the
exhaust system in front of a nitrogen oxide cata­ l ytic converter to reduce nitrogen em issions. The
urea solution is known as Ad Blue or DEF (Diesel
Exhaust Flu id) . The informat ion that fo llows w ill
u se the name Ad B lue .
The Ad Blue is carried in a separate tank in the ve­
hicle. The Ad Blue usage accounts for approxi­
mately 1.0% to 4.0% of the diesel fuel that is
u sed.
When a message about refilling the AdBlue ap­ pears in the instrument cluster display, you must
refill the Ad B lue yourse lf or have it refilled by an
authorized Aud i dea ler or authorized Audi Serv ice
Fac ility<::>
page 32 7.
(0 Tips
-Th e d isp lay indicates the distance rema ining
that can be
dr iven¢ page 326. If the Ad Bl­
ue tank is comple tely emp ty, the eng ine will
not s tart again after the ign ition is switched
off.
-Ad Bl ue is required by law to ope rate th is ve­
hicle.
Messages in the instrument cluster display
App lies to: vehicles wi th selective catalyt ic reduct ion
The display indicat es if the Ad Blue level is low or
if there
is a system malfun ction.
AdBlue level low
You w ill be informed in the instrument cluster
display if the AdBlue in the tank drops below a
ce rtain level. Add at a minimum the amount of
AdBlue shown in the message:
II Refill with a t lea st x qt ( l) Ad Blu e. Range
x mi (km )

This message appears when there is only enough
Ad Blue left to drive the distance indicated in the
i nstr ument cluster . Fill the Ad Blue .
• Refill with at least x qt (l) AdBlue. No en·
gine start in
x mi (km ). See owner 's manual
This message appears when there is only eno ugh
Ad Blue lef t to d rive the distance indicated in the
i nstr ument cluster. Fill the Ad B lue. O therwise
the engine will not start again if you stop it once
the distance indicated has been driven .
• Refill with at least x qt (l) AdBlue . Engine
start n ot possibl e. See owner 's manual
This message appea rs when the Ad Blue tank is
empty. Fill the AdB lue. Otherwise you will not be
ab le to s tart the engine aga in once yo u stop it.
The AdBlue must be refilled when the amount in
the tank has reached the minimum level
¢ page 327, Preparation.
Incorrect filling /system ma lfunction
A message appears if the Ad Blue tank was filled
with a fluid other than AdBlue and the system
has detected that the tank was f illed incor rectly,
or if there is a system malfunction .
II Ad Blue: malfunct ion ! No engine start in
x mi (km ). Se e owner's manual
This message appears when it is only possible to
drive the d istance ind icated in the instrument
cluster . Drive to the nearest author ized Audi
dealer o r authorized Aud i Serv ice Facility to have
the malfunction corrected . Otherwise the engine
w ill not start again if you stop it once the d is­
tance indicated has been dr iven .
• Ad B lu e: malfunction! No engine start poss i­
ble . See owner' s manual
This message appears if the system has detected
that the tank was filled incorrectly or that there
is a malfunction . Drive immediately to the near ­
est autho rized Aud i dea ler or authorized Aud i
Service Facility to have the malfunction correct­
ed. Othe rwise you will not be able to start the en­
g ine again once you stop i t.
Checking and Filling
Preparation
Applies to: vehicles with selective cata lytic reduction
Fig. 272 R ight rear s ide o f th e ve hicle: removing t he Ad Bl­
u e cap
The Ad Blue tank ope ning is located near the d ie­
se l tank opening. Add at least the amount of
AdB lue shown in the instrument cluster display.
This is the minimum amount required to ensure
the system detects the refilling and to start the
engine. You can add a maximum of 6.3 gallons
(24 L).
Requirement: the request to add Ad Bl ue must
appear in the instrument cluster display.
.. Switch t he ignit ion off .
.. Open the tank filler door¢ page 324 .
.. Turn the ta nk filler neck cap to the left to re­
move
¢fig . 272.
.. Refill Ad Blue us ing a pump noz zle ¢ page 328,
a canister ¢ page 328 or a bott le ¢ page 328 .
A WARNING ,~ -Ad B lue can irritate the s kin, eyes and respira­
tory sys tem.
If th ere is contact with t he flu id,
flus h immed iate ly w ith plenty of wa ter. Con­
su lt a phys icia n if necessary .
(D Note
- Only use Ad Blue that conforms to the
standard ISO 22241-1. Do not m ix any addi­
tives with the Ad Blue and do not dilu te it
w ith wate r.
- Do not add AdBl ue to the diesel tank or add
diese l fuel to t he A d Bl ue tank. Do not s tart
t he engine un de r any c ircumst ances if th e
wrong fuel is filled in the tan k. There is a
327

<( a, .... N ,....
N .... 0 \0
3 a,
• Position the bottle on the filler tube and turn
the bottle clockwise unti l it stops turning.
• Press lightly against the bottom of the bottle
to empty it. Continue pressing the bottom of
the bottle until it is empty or until f luid stops
flowing into the tank .
• Remove the bottle and seal the filler neck
~ page 329, Completing AdBlue refill .
(D Note
Only use refill bottles that are approved for
your veh icle. Us ing other systems can cause
Ad Blue to leak.
-You can obta in refill bottles from an author­
i zed Audi dealer or author ized Audi Service
Fac ility.
- A perm itted refill bottle contains approxi­
mately 0.5 gallon ( 1.9 liters) of Ad B lue.
Completing AdBlue refill
Applies to: vehicles with selective catalytic reduction
Closing th e filler neck
• Turn the Ad Blue cap to the right on the filler
tube u ntil the cap clicks into p lace
c;> .&. in
Preparation on page 32
7, c;> (Din Preparation
on page 327 ..
• Then press on the left side of the tank door un -
ti l it latches.
After filling
The vehicle must be driven so that the system
recognizes t hat the Ad Bl ue was refilled. This can
take severa l min utes .
• If there was no Ad Blue left in the tank and a
range of O mi (0 km) was shown in the display ,
switch the ign ition on for about 3 0 seconds be­
f ore star ting the engine .
(D Tips
Ad Blue in the tank can free ze at very low tem­
pe ra tures. If this happens, the system will
no t detect t hat the Ad Bl ue was refilled and i t
wi ll continue to inform you of the low Ad Blue
Ch eck ing and Filling
level. The message t urns off as soon as the
tank thaws out again .
Emissions control
systems
Catalytic con verter
Applies to: vehicles with gasoline engines
T he vehicle may only be driven with un leaded
gasoline, otherwise the catalytic converter will be
destroyed.
Never drive until the tank is compl ete ly empty .
The irregu lar supply of fuel that resu lts from that
can cause eng ine misfires. Uncombusted fuel will
enter the exhaust system, which can cause over­
heating and damage to the catalytic converter .
Diesel particulate filt er
Applies to: vehicles with diesel engines
The diese l particu late filter filters near ly all of
the soot particles out of the exhaust. The filter
cleans itself automatically under norma l driving
condit ions. If the filter cannot clean itself (for ex­
ample, because you are only driving short distan ­
ces), the filter becomes clogged with soot and
the
1\1 i ndicato r light for the diese l part iculate
filte r tu rns on
c;> page 33.
_& WARNING
The tempera ture of the exhaus t sys tem is
high, bot h when driv ing and a fter stoppi ng
the engine.
- Never tou ch the e xhaust tail pipes once they
have become hot. This cou ld res ult in burns .
- Do not par k your veh icle over flamm ab le
materia ls such as grass or leaves because
the high temperature of the emissions con­ trol system (catalytic converter or diesel particu late filter) cou ld start a fire.
-Do not app ly underbody protectant in the
exhaust system area, beca use this increases
the risk of f ire.
329