2018 Alfa Romeo Stelvio child lock

[x] Cancel search: child lock

Page 18 of 276

Alfa Romeo Stelvio 2018  Owners Manual KEYS
Key Fob
Your vehicle uses a keyless ignition
system. This system includes a key fob
and a keyless push button ignition.
The Remote Keyless Entry key fob allows
you to lock or unlock the doors and

Page 21 of 276

Alfa Romeo Stelvio 2018  Owners Manual IGNITIONSYSTEM
Operation
To activate the keyless ignition, the key
fob must be inside the vehicle.
The keyless ignition has the following
modes:
STOP: engine off, steering locked.
Some electrical devi

Page 25 of 276

Alfa Romeo Stelvio 2018  Owners Manual When the function is disabled, this is
indicated by the light on the
Volumetric/Anti-Lift Protection button
flashing for several seconds.
Any disabling of the Volumetric/Anti-Lift
Protection must be r

Page 29 of 276

Alfa Romeo Stelvio 2018  Owners Manual System Activation/Deactivation
The Passive Entry system can be
activated or deactivated using the
Information and Entertainment System.
General Information
The following regulatory statement
applies t

Page 30 of 276

Alfa Romeo Stelvio 2018  Owners Manual Unlocking The Doors With A Discharged
Battery
Proceed as follows to unlock the doors if
the vehicle battery is discharged.
1. With the doors unlocked insert the
emergency key from the key fob into the

Page 35 of 276

Alfa Romeo Stelvio 2018  Owners Manual 2. Place the seat belt so that it doesnt
impede the movement of the backrest
while tilting it.
3. Pull both seat back release levers to
fold down the backrests. They will fold
forward automatically.

Page 56 of 276

Alfa Romeo Stelvio 2018  Owners Manual POWER WINDOWS
Power Window Switches
The power window switches work with
the ignition in the ON position and for
three minutes after the ignition has been
placed in the STOP position. When one of
the f

Page 57 of 276

Alfa Romeo Stelvio 2018  Owners Manual Power Window System Initialization
If power supply is interrupted, the
electric window automatic operation
must be re-initialized.
To perform the initialization procedure,
which must be done on each d
Page:   1-8 9-16 17-24 next >