2018 Alfa Romeo 4C Spider wheel

[x] Cancel search: wheel

Page 246 of 294

Alfa Romeo 4C Spider 2018  Owners Manual Keep dismounted tires in a cool, dry place with as little
exposure to light as possible. Protect tires from contact
with oil, grease, and gasoline.
Replacement Tires
The tires on your new vehicle prov

Page 248 of 294

Alfa Romeo 4C Spider 2018  Owners Manual WARNING!
Do not use Summer tires in snow/ice conditions.
You could lose vehicle control, resulting in severe
injury or death. Driving too fast for conditions also
creates the possibility of loss of ve

Page 249 of 294

Alfa Romeo 4C Spider 2018  Owners Manual tire rotation for your vehicle. If your vehicle has this
option, refer to an authorized tire dealer for the recom-
mended tire rotation pattern.
Compact Spare Tire — If Equipped
The compact spare is

Page 250 of 294

Alfa Romeo 4C Spider 2018  Owners Manual Inflate collapsible tire only after the wheel is properly
installed to the vehicle. Inflate the collapsible tire using
the electric air pump before lowering the vehicle.
Do not install a wheel cover o

Page 251 of 294

Alfa Romeo 4C Spider 2018  Owners Manual WARNING!(Continued)
wheel. Keep inflated to the cold tire inflation pres-
sures listed on your Tire and Loading Information
Placard located on the driver ’s side B-Pillar or the
rear edge of the dri

Page 252 of 294

Alfa Romeo 4C Spider 2018  Owners Manual CAUTION!
Do not use scouring pads, steel wool, a bristle
brush, metal polishes or oven cleaner. These prod-
ucts may damage the wheel’s protective finish.
Such damage is not covered by the New Vehic

Page 254 of 294

Alfa Romeo 4C Spider 2018  Owners Manual All passenger vehicle tires must conform to Federal
safety requirements in addition to these grades.
Treadwear
The Treadwear grade is a comparative rating, based
on the wear rate of the tire when test

Page 257 of 294

Alfa Romeo 4C Spider 2018  Owners Manual CAUTION!
•Do not use abrasive or strong cleaning materials
such as steel wool or scouring powder that will
scratch metal and painted surfaces.
• Use of power washers exceeding 1,200 psi
(8 274 kPa