2017 VOLVO XC90 TWIN ENGINE HYBRID ECO mode

||
CLIMATE
200

Climate view
Tap the center button on the climate bar toaccess Climate view, which is divided into the fol-lowing tabs: Main climate, Rear climate andParking climate Toggle between the tabs byswiping the screen from left to right and by tap-ping the respective headings.

Main climate settings
In addition to the climate bar's functions, otherprimary climate system functions can also becontrolled from the Main climate tab.
Max, Electric, Rear: controls for defrostingwindows and door mirrors.
AC: air conditioning controls.
Recirc: recirculation controls.
Air distribution controls.
Blower control for the front seats.
AUTO: climate system Auto mode.
Rear climate
All of the climate system functions for the rearseat can be controlled from the Rear climatetab.
2nd row climate: Blower control and cli-mate system functions for the second row ofseats.
3rd row climate: Blower control and climatesystem functions for the third row of seats.

CLIMATE
}}
* Option/accessory, for more information, see Introduction.207

From the center display's Climate view
Activate/deactivate max. defroster
Max. defroster button in Climate view
1. Go to Climate view in the center display.
2.Tap Max.
>Max. defroster is activated (button lightsup)/deactivated (button is off).
Max. defroster overrides automatic climatecontrol and recirculation, and activates theair conditioning, changes blower speed to
55 and the temperature to HI5.
When max. defroster is deactivated, theclimate system returns to the previoussettings.
Activating/deactivating windshield heating *
Windshield heating button in Climate view
1. Go to Climate view in the center display.
2.Tap Electric.
>Windshield heating is activated (buttonlights up)/deactivated (button is off).

NOTE
•Triangular areas at the far sides of thewindshield are not heated electrically andwill take slightly longer to defrost/de-ice.
•The heated windshield may affect theperformance/range of e.g., transpondersused to automatically pay highway tolls orother communication equipment.
Activating/deactivating rear window and
door mirror heating
Rear window/door mirror heating button in Climate view
1. Go to Climate view in the center display.
2.Tap Rear.
>Rear window/door mirror heating is acti-vated (button lights up)/deactivated (but-ton is off).

Automatically activating/deactivating
the defrosting function when the engine
is started
The rear window/door mirror/windshield heating*can be set to start automatically when the engineis started.
1.Tap Settings in the center display's Topview and select Climate.
5In models with the 4-zone climate system*, front seats only.

||
LOADING AND STORAGE
* Option/accessory, for more information, see Introduction.222

Using the glove compartment as a
cooler
The glove compartment can be used to cooldrinks or food and the cooling feature functionswhen the climate system is active (i.e., when theignition is in mode II or when the engine is run-ning).
Cooling activated
Cooling deactivated
–Activate/deactivate cooling by moving thecontrol as far as possible toward the passen-ger compartment/glove compartment.

Related information
•Passenger compartment storage spaces(p. 220)
•Private (valet) locking (p. 253)
Tunnel console
The tunnel console, located between the frontseats, contains a 12-volt electrical socket, cupholders and storage spaces, etc.
Storage space*. Press the handle to openthe cover.
Storage space with cup holders for the driverand passenger and a 12-volt socket
Storage space and USB/AUX sockets underthe armrest
Climate control panel for the rear seats*
NOTE
One of the alarm sensors, which is sensitiveto metallic objects, is located under the tunnelconsole cup holders. Avoid leaving coins,keys, etc., in the cup holders because theymay inadvertently trigger the alarm.

Related information
•Passenger compartment storage spaces(p. 220)
•Electrical sockets (p. 230)
•Alarm (p. 256)
•Rear climate system controls on the tunnelconsole (p. 201)

LOADING AND STORAGE
}}
* Option/accessory, for more information, see Introduction.225
Steel cargo grid*
Your vehicle can be equipped with a steel gridthat helps prevent objects in the cargo area frommoving forward into the passenger compart-ment.
The steel grid is made up of the grid itself andtwo separate mounting brackets.
Each of the brackets has a screw cover and thereare two plastic sleeves for the grid.

WARNING
•No one should ever be allowed to remainin the cargo compartment when the vehi-cle is moving.
•The steel grid may only be used in therear position described in this article. Theceiling attachment points above the frontseats are not intended to anchor thesteel grid.
•The third row of seats (7-seat models*only): these seats must be folded downwhen the steel grid is mounted in thevehicle.
•After being mounted, be sure that thesteel grid is securely anchored in place.
Mounting
1. Fold down the rear seats (second row ofseats in 7-seat models) and lift in the steelgrid through one of the rear doors or the tail-gate. The curved (convex) side of the gridshould face toward the cargo compartmentand the hooks on each side of the gridshould face upward. The mounting bracketsand plastic sleeves are not needed in thisstep.
2. Press one of the grid's hooks into the largerpart of the opening in the ceiling attachmentpoint (1) as shown in the illustration.
3.Grasp the grid near the hook and move ittoward the smaller opening (2).
> This secures the hook in the attachmentpoint.
4. Repeat steps 2 and 3 for the hook on theopposite side of the grid.
5. Attach the mounting bracket's hook throughthe cargo anchoring eyelet near the floor ofthe cargo compartment and insert the threa-ded section of the bracket through the grid'slower attachment hole (1).
6.Slide the plastic sleeve onto the threadedsection of the of the mounting bracket withthe sleeve's flange turned upward and pressit down through the hole. Screw the screwcover into place until its underside is approx.0.2 in. (5 mm) from the grid (2).
7. Repeat steps 5 and 6 for the opposite side.
8. Center the grid and tighten both mountingbrackets alternately until the grid is heldsecurely in place.

Removing
Perform the steps above in reverse order.
The hooks can be removed before the plasticsleeves are removed from the holes in the grid.

LOADING AND STORAGE
* Option/accessory, for more information, see Introduction.230
Electrical sockets
There are two 12-volt sockets in the tunnel con-sole, a 120-volt socket on the rear side of thetunnel console, and one 12-volt socket in thecargo area*.

120-volt socket in the tunnel console 3
120-volt socket in the tunnel console for the secondrow of seats
This socket is intended for 120-volt devices suchas laptops, chargers, etc.
The max. current provided is 150W.
Using the sockets
1. Remove or pull down the cover over thesocket and plug in the device.
> The socket's indicator light will indicate itsstatus. The socket can only provide elec-trical current when the light is green.
2. Disconnect the device by pulling its plug, notits cord.
Pull up the cover over the socket when it is not inuse.

CAUTION
•Do not connect devices with large orheavy plugs that could come loose whiledriving.
•Do not use devices that can cause inter-ference with the vehicle's radio receiveror electrical system.
WARNING
•Be sure to place any devices connectedto the socket safely so that they do notbecome projectiles in the event of a sud-den stop and injure the occupants of thevehicle.
•Be aware that connected devices maygenerate heat and become very hot.
•Only connect devices that function cor-rectly and are free from defects. Thesedevices should be intended for use in a120-volt, 60Hz socket with a plugintended for the socket in the vehicle andbe UL-approved (or the equivalentthereof).
•Never let the device, its plug or thesocket itself come in contact with fluidsof any kind. Never touch or use thesocket if it appears to be damaged orwet.
•Never connect multiple plugs, adapters orextension cords to the socket. This couldoverride the socket's safety functions.
•Never let children play or tamper with thesocket, or attempt to insert any objectsinto it. Never leave children unattended inthe vehicle when the socket is active.
•Never try to modify or repair the 120-voltsocket. This should only be done by a

3
Certain models only.

||
LOADING AND STORAGE
232

12-volt socket in the tunnel console
12-volt socket in the tunnel console for the front seats
12-volt socket in the tunnel console for the second rowof seats
The electrical sockets can be used for 12-voltdevices such as monitors, MP3 players and cell
phones. For the sockets to provide electrical cur-rent, the ignition must be in at least mode I.

WARNING
Always keep the sockets covered when not inuse.

NOTE
Options and accessories such as monitors,MP3 players and cell phones that are con-nected to the 12-volt sockets may be acti-vated by the climate system even if the igni-tion is completely switched off or when thevehicle is locked if preconditioning is startedby a timer.
For this reason, disconnect these devicesfrom the sockets when they are not in use tohelp avoid battery drain.

CAUTION
Max. current provided is 10 A (120 W) if onesocket is used at a time. If both of the sock-ets in the tunnel console are used at thesame time, the max. current provided persocket is 7.5 A (90 W)
If a tire sealing system's compressor is beingused, no other device should be connected toany of the other sockets while the compres-sor is operating.
12-volt socket in the cargo area
12-volt socket in the cargo area
Fold down the cover to access the socket. Max.current provided is 10 A (120 W).

NOTE
The 12-volt socket in the cargo area provideselectrical current even when the ignition isswitched off. Using the socket while theengine is not running will drain the battery.

Related information
•Passenger compartment storage spaces(p. 220)
•Ignition modes (p. 400)

LOCKS AND ALARM
* Option/accessory, for more information, see Introduction.234
Locks and remote keys
The vehicle can be locked and unlocked in vari-ous ways and there are several types of remotekeys that can be used.

Locking/unlocking/opening/closing
The vehicle can be locked/unlocked from thepassenger compartment, using the buttons onthe remote key or by using the optional PassiveEntry system where it is only necessary to have akey in your possession to lock or unlock thedoors.
On models equipped with a power tailgate*, it canalso be opened/closed by moving your footunder a sensor* beneath the rear bumper.
If for any reason a remote key does not functionproperly, it may be necessary to replace its bat-teries but the vehicle can always be locked orunlocked manually using the remote key'sdetachable key blade.

Remote key
The remote key does not have to be physicallyhandled in order to start the engine because thevehicle is equipped with the standard PassiveStart system (the key only needs to be in thefront part of the passenger compartment). If thevehicle is equipped with the optional PassiveEntry system that enables keyless entry and start,the key can be anywhere in the vehicle when theengine is started.
Models with Passive Entry* also have an extra,smaller key without buttons called a Key Tag.
Additional keys can be ordered from a Volvoretailer.
Related information
•Immobilizer (p. 234)
•Alarm (p. 256)
•Child safety locks (p. 257)
•Remote key (p. 238)
•Foot movement tailgate operation* (p. 243)
•Locking/unlocking from inside the vehicle(p. 246)
•Locking/unlocking from outside the vehicle(p. 244)
•Locking/unlocking the tailgate (p. 249)
•Starting the engine (p. 402)
Immobilizer
The immobilizer is a start inhibitor that helps pre-vent unauthorized persons from starting theengine.
Each of the keys supplied with your vehicle con-tains a unique coded transponder. The vehiclecode in the key is transmitted to the vehicle'signition system where it is compared to the codestored in the start inhibitor module.
The following message (which may appear in theinstrument panel) is related to the immobilizer:
SymbolMessageExplanation
Vehicle keynot found
SeeOwner'smanual
Remote key notrecognized duringstart. Place theremote key on thekey symbol in thetunnel console cupholder and try tostart the vehicleagain.

Related information
•Remote key's range (p. 240)
•Remote key (p. 238)

||
LOCKS AND ALARM
* Option/accessory, for more information, see Introduction.252
–Press the button14 on the lower edge ofthe tailgate.
>The tailgate will close automatically butwill not be locked.
–Press the button14 on the lower edge ofthe tailgate.
>The tailgate will close automatically. Thetailgate and doors will also be locked andthe alarm will be armed.
If the remote key is not close enough to the tail-gate, automatic locking/unlocking/opening/clos-ing will not be possible. Three short audible sig-nals will sound.

Interrupting opening/closing
–This can be done in five ways:
•Press the button on the lighting panel
•Press the button on the remote key
•Press either of the buttons on the loweredge of the tailgate
•Press lightly on the rubber-covered buttonunder the tailgate's outside handle
•Move your foot under a sensor beneaththe rear bumper*
>The tailgate will stop moving
Programming the tailgate's maximum
opening angle
The tailgate's maximum opening angle can beprogrammed, for example, if the tailgate has to beopened in a garage with a low ceiling.
Programming the opening angle:
–Open the tailgate manually to the desiredangle and press and hold the closing buttonon the tailgate's lower edge for at least 3seconds. Release the tailgate.
>Two audible signals will sound to indicatethat the selected opening angle has beenstored.
Erasing tailgate programming
–Open the tailgate manually to its highestposition and press and hold the closing but-ton on the tailgate's lower edge for at least 3seconds. Release the tailgate.
>Two audible signals will sound to indicatethat the programmed opening angle hasbeen erased.
NOTE
If the tailgate has been opened and closedcontinuously too long, the automatic functionwill be deactivated to avoid overloading theelectrical system. The automatic function canbe used again after approximately 2 minutes.
If the vehicle's battery has been discharged ordisconnected, or if the tailgate has been openfor more than 24 hours, the tailgate must beopened and closed once manually to resetthe system.

Pinch protection
If the tailgate is obstructed when being opened/closed, a pinch protection mechanism is acti-vated.
•While opening: the tailgate will stop movingand an audible signal will sound.
•While closing: the tailgate will stop andreturn to the currently programmed maximumopening position. An audible signal willsound.

WARNING
Pay attention to the risk of injury when open-ing/ closing the tailgate. Before opening/closing: Make sure that no one is in the pathof the tailgate as an injury could occur.
14Models equipped with the optional Passive Entry system have a button to close the tailgate and a button to close and lock the tailgate.