2017 VOLVO XC90 TWIN ENGINE HYBRID heating

INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.165
Steering wheel keypads and paddles*
Driver support system controls15
Paddles for manually shifting gears*
Keypad for voice controls, adjusting thehead-up display*accessing menus and mes-sages, and handling phone calls

Horn
The horn is located in the steering wheel hub.

Related information
•Adjusting the steering wheel (p. 166)
•Turning steering wheel heating* on and off(p. 208)
•Cruise Control (CC) (p. 274)
•Speed limiter (SL)* (p. 267)
•Adaptive Cruise Control (ACC)* (p. 281)
•Distance Alert* (p. 279)
•Pilot Assist-2* (p. 305)
•Steering wheel paddles* (p. 427)
•Voice control (p. 125)
•Head-up display (HUD)* (p. 122)
•Using the instrument panel App menu(p. 160)
•Phone (p. 448)
15Cruise control*, Speed limiter *, Adaptive cruise control*, Distance alert* and Pilot Assist*.

INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.167
•Moving the second row seats forward/rear-ward (p. 176)
•Adjusting the second row backrest tilt(p. 177)
Manually operated front seats
The front seats can be adjusted in a number ofways to help provide the most comfortable seat-ing position.
Raise/lower the front edge of seat cushionby pumping up/down
Move the seat forward/rearward by pullingthe bar upward and moving the seat.
Change lumbar support by pressing the but-ton*
Raise/lower the seat by moving the controlup/down
Change backrest tilt by turning the wheel

WARNING
•Do not adjust the seat while driving. Theseat should be adjusted so that the brakepedal can be depressed fully. In addition,position the seat as far rearward as com-fort and control allow.
•Check that the seat is securely lockedinto position after adjusting.

Related information
•Turning seat heating* on and off (p. 210)
•Power front seats* (p. 168)
•Multifunctional front seats* (p. 170)
•Seat belts (p. 66)

INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.168
Power front seats*
The power front seats offer a number of adjust-ment possibilities to help maximize comfort andergonomics.
The power seats have an overload protector thatactivates if a seat is blocked by any object. If thisoccurs, put the ignition in mode I or 0 and waitfor a short period before operating the seatagain.
The power seat(s) can be adjusted for a shortperiod after unlocking the door with the remotekey without switching the ignition on. Seat adjust-ment can always be made when the engine isrunning.

Related information
•Multifunctional front seats* (p. 170)
•Adjusting power front seats* (p. 168)
•Using the power seat memory function*(p. 169)
•Manually operated front seats (p. 167)
•Turning seat heating* on and off (p. 210)
•Turning front seat ventilation* on and off(p. 211)
•Easy access to and from the driver seat(p. 174)
Adjusting power front seats*
The power front seat(s) can be adjusted to manypositions to help improve comfort and ergonom-ics.
Adjust lumbar support by pressing the con-trol up/down/forward/rearward
Raise/lower the front edge of the seat cush-ion by moving the control up/down
Raise/lower the seat by moving the controlup/down
Move the seat forward/rearward by movingthe control forward/rearward
Change backrest tilt by moving the controlforward/rearward
Only one of the power seat's controls can beused at the same time.
The front seat backrests can be folded downcompletely.
Related information
•Power front seats* (p. 168)
•Using the power seat memory function*(p. 169)
•Multifunctional front seats* (p. 170)
•Seat belts (p. 66)

INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.171
center of the display. If both seats are adjusted,the settings for the driver seat are shown on theupper half of the screen and the ones made forthe passenger seat are on the lower half.
Press the Home button on the center console toexit the seat adjustment setting view.

Related information
•Power front seats* (p. 168)
•Adjusting function settings in the multifunc-tional front seats* (p. 171)
•Turning seat heating* on and off (p. 210)
Adjusting function settings in the
multifunctional front seats*
The multifunction controls on the side of the seatas well as the center display can be used tomake seat adjustments. The adjustment settingsare shown in the center display*.
Multifunction control on the side of the seat
Turn the control up or down to activate.

Front seat massage settings *
The front seat backrests have a massage func-tion. Air-filled cushions provide the massagingaction and a number of settings are available.
The massage function can only be used whenthe engine is running.
Massage view in the center display
1. Activate the multifunction control by turningit up or down. Seat settings will be displayedin the center display.
2.Tap Massage in the seat settings view.

INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.175
Rear seats
Your vehicle has three rows of seats. The sec-ond row of seats has three individual seatingpositions and the third row of seats has two indi-vidual seating positions.

Related information
•Adjusting the second row backrest tilt(p. 177)
•Adjusting the second row head restraints(p. 175)
•Folding the second row backrests (p. 178)
•Folding the third row backrests (p. 180)
•Getting into and out of the third row of seats(p. 179)
•Moving the second row seats forward/rear-ward (p. 176)
•Turning seat heating* on and off (p. 210)
Adjusting the second row headrestraints
The center head restraint in the second row ofseats can be adjusted to suit the height of theseat's occupant. The outboard head restraintscan be folded down* for a better rear view.

Adjusting the center head restraint
The center head restraint should be adjusted upor down according to the passenger's height. Therestraint should be carefully adjusted to supportthe occupant's head.
The center rear seat head restraint should onlybe in its lowest position when this seat is NOToccupied. When the center seat is occupied, thehead restraint must be correctly adjusted to thepassenger

||
CLIMATE
* Option/accessory, for more information, see Introduction.190

Preconditioning
Preconditioning the vehicle before driving canhelp reduce wear and reduce energy consump-tion during a trip.

NOTE
Full preconditioning is only possible when thevehicle's charging cable is connected.
In other cases, the passenger compartmentcan be cooled for 3 minutes in warm weather.This function is started from the Parkingclimate tab in the center display's Climateview.
With the charging cable connected, precondition-ing can be started immediately or a timer functioncan start this procedure at a later time.
This feature utilizes several of the vehicle's sys-tems:
•The High Voltage Coolant Heater (HVCH)warms the hybrid battery and passengercompartment in cold weather.
•In warm weather, the ventilation system willattempt to cool the passenger compartmentto the current ambient temperature.
•In warm weather, the air conditioning systemwill cool the passenger compartment to acomfortable temperature.
•The electrically heated steering wheel andseats can be activated.
•Heating for the windshield, tailgate windowand door mirrors can be activated.
If preconditioning is used in warm weather, a cer-tain amount of water may condense under thevehicle, which is normal.
When preconditioning is used, this system willattempt to establish a comfortable temperature inthe passenger compartment but not necessarilythe temperature currently set in the climatesystem.

Maintaining a comfortable passenger
compartment climate
The climate in the passenger compartment canbe maintained even when the vehicle is parkedand the engine is turned off (e.g., if anyoneintends to remain in the vehicle).
This function can only be direct-started.
This function utilizes several of the vehicle's sys-tems:
•Residual heat from the engine is used helpkeep the passenger compartment warm incool temperatures.
•In warm weather, the ventilation system willattempt to cool the passenger compartmentto the current ambient temperature.
This function will not be activated if the vehicle islocked from the outside in order to avoid using
residual engine heat unnecessarily. This functionis primarily intended for use when the engine isnot running but someone remains in the vehicle.
Related information
•Starting and stopping preconditioning(p. 194)
•Activating/deactivating the climate comfortretaining function* (p. 191)
•Activating/deactivating the parking climatetimer (p. 191)
•Charging the hybrid battery (p. 413)
•Hybrid battery charging cable (p. 405)

CLIMATE
* Option/accessory, for more information, see Introduction.194
Starting and stoppingpreconditioning
Preconditioning heats/cools the passenger com-partment prior to driving. Please note that thecharging cable must be connected.

Starting/stopping from the center
display
The preconditioning button in the Parking climate tabin Climate view.
1. Open Climate view in the center display.
2.Tap Parking climate .
The window for seat/steering wheel heating in Climateview's Parking climate tab
3. Tap the boxes to select if seat/steeringwheel heating is to be activated/deactivatedwhen preconditioning starts.
4.Tap Preconditioning.
>Preconditioning starts/stops and the indi-cator lights in the buttons will be on/off.

NOTE
Full preconditioning is only possible when thevehicle's charging cable is connected.
In other cases, the passenger compartmentcan be cooled for 3 minutes in warm weather.This function is started from the Parkingclimate tab in the center display's Climateview.
The vehicle's doors and windows should beclosed during preconditioning.
Starting from a cell phone *
Starting preconditioning and checking the cur-rent settings can be done from a cell phone withthe Volvo On Call mobile app. Preconditioningheats the passenger compartment to a comforta-ble temperature or cools the compartment to thecurrent ambient temperature.
If the vehicle is equipped with the optionalEngine Remote Start (ERS), the air conditioningcan be used to pre-cool the passenger compart-ment to a comfortable temperature.

Related information
•Setting the parking climate (preconditioning)timer (p. 192)
•Activating/deactivating the parking climatetimer (p. 191)
•Hybrid battery charging cable (p. 405)

CLIMATE
}}
* Option/accessory, for more information, see Introduction.201
Rear seat temperature control.
Rear seat heating control*.

Parking climate 1
All of the parking climate functions can be con-trolled from the Parking climate tab.

Related information
•Climate system controls (p. 199)
•Defrosting windows and mirrors (p. 206)
•Air conditioning (p. 209)
•Adjusting air distribution (p. 213)
•Setting the temperature (p. 203)
•Setting the blower speed (p. 201)
•Automatic climate control (p. 198)
•Turning steering wheel heating* on and off(p. 208)
•Turning seat heating* on and off (p. 210)
Rear climate system controls on thetunnel console
The rear seat climate system functions are con-trolled from the rear side of the tunnel console.
Rear seat heating*
Rear seat blower speed
Rear seat temperature control

Related information
•Climate system controls (p. 199)
•Turning seat heating* on and off (p. 210)
•Setting the blower speed (p. 201)
•Setting the temperature (p. 203)
Setting the blower speed
The blower can be set to five different automaticspeeds plus Off and Max. The blower speedcan be set separately for the front and rearseats.
Setting blower speed for the front seats
Blower control buttons in Climate view
1. Go to the center display's Climate view.
2.Tap the desired blower speed: Off, 1–5 orMax.
>The blower speed will change and thebutton for the selected speed will light up.

1
XC90 T8 Plug-in Hybrid only.