2017 VOLVO V90 display

||
MAINTENANCE AND SERVICE
* Option/accessory.
508 The appointment request contains vehicle data when it is sent from your car to the workshop viayour Internet connection. This information facili-tates planning for the workshop.
Accept the appointment suggestion
The car will retrieve appointment suggestions via your Internet connection when it is available.When the car has received an appointment sug-gestion, a message will be shown at the top ofthe centre display.
1. Tap the message.
2. If the suggested booking is acceptable, tap
on the
Accept button. Otherwise press
either of the Send new proposal orDecline buttons.
When an appointment suggestion is accepted, the reply will be sent to the workshop via yourInternet connection.
Sending vehicle data
You can send vehicle data at any time from your car, e.g. if you book a workshop visit directly viathe My Volvo owner's portal, and will help yourworkshop with better basic information. The vehicle data sent is the last saved (last time the car was running).
1. Open the Car status app from the app view
in the centre display.
2. Press the
Appointments button.
3. Press the
Send car data button.
> A message that vehicle data are being sent is shown at the top of the centre dis- play. You can cancel data transmission bytapping the X in the activity indicator. The vehicle data are sent via your Internet connection.
See workshop information
1. Open the Car status app from the app view
in the centre display.
2. Press the
Appointments button. 3.
Press the
Workshop information button.
> A pop-up window with information on your dealer will open.
4. Call your dealer if you like, or tap on the address or GPS coordinates to start naviga- tion to your workshop 2
.
Booking information and vehicle dataWhen you decide to book a service or send data from your car, the booking information and vehi-cle data will be sent via you Internet connection.The vehicle data make it easier for your workshopto plan your next visit. The vehicle data consists of information in the following areas:
• service requirement
• time since last service
• function status
• fluid levels
• meter reading
• the car's vehicle identification number (VIN 4
)
• the car's software version
• the car's diagnostics data.
2
Applies to Sensus Navigation *.
4 Vehicle Identification Number.

MAINTENANCE AND SERVICE
* Option/accessory.509
Related information
•Volvo ID (p. 23)
• Online car
* (p. 463)
• Car status (p. 506)
Inspection and service of the system for vehicle gas
*5
The system for vehicle gas must be inspected regularly by an authorised workshop - an author-ised Volvo workshop is recommended.
WARNING
The gas is compressed to high pressure. This system must only be serviced and repaired byan authorised workshop. Never attempt to disassemble or adjust the gas system or its component parts yourself-risk of serious personal injury.
Remote updates Several of the car's systems can be updated from the centre display with an online car.
The Download Centre app is
started from app view in the centre display and enables:
• searching for and updating system software
• updating map data for Sensus Navigation
*
• downloading, updating and uninstalling apps.
Related information
•
System updates (p. 510)
• Downloading, updating and uninstalling apps (p. 468)
5
Applies to the Bi-Fuel model variant.

MAINTENANCE AND SERVICE
* Option/accessory.
510
System updates
System updates are intended for the Internet- connected and infotainment components of thecar. If system software updates are available, theupdates can be made all at once or one at atime.
System updates are handled via the Download Centre app
in the centre display's applica- tion view. A tap on the buttonstarts a download application inthe home view's bottom sub-view. If no search for available
updates has been performed since the last timethe infotainment system was started, a search isperformed. No search is performed if a softwareinstallation is in progress. An icon in the down- load application's button
System updatesshows how many updates are available. A tap on the button shows a list of updates that can beinstalled in the car. For more information andanswers to common questions regarding functionand to download certain system updates, go in tosupport.volvocars.com. For system updates to be possible, the car must be connected to the Internet, see section "Onlinecar".
Searching for software updates is activated when the car is supplied from the factory.
NOTE
Data download may affect other services that transmit data, e.g. Internet radio. If the effecton other services is experienced as disruptivethen the download can be interrupted. Alter-natively, it may be appropriate to switch off orinterrupt other services.
NOTE
An update can be interrupted when the igni- tion is switched off and the car is left. However, the update does not have to be completed before the car is left, this isbecause the update is resumed the next timethe car is used.
Update all system software
–Select Install all at the bottom of the list.
If no list is desired, then
Install all can be
selected at the System updates button instead.
Update individual system software
programs
–Select Install for the software required.
Cancelling the download
–Tap on X in the activity indicator that has replaced the button Install at the start of the
download. Note that only the download can be cancelled, when the installation phase has started, this can-not be cancelled.
Background search for software
updates
The function can be deactivated via the centredisplay: 1. Press
Settings in the top view.
2. Press
SystemDownload Centre.
3. Deselect
Auto Software Update.
If an update is available, the message
New
software updates available is shown in the
centre display's status bar. A tap on the message starts a download application in the home view'sbottom subview. As soon as the download appli-cation has started, an icon in the download appli- cation's button
System updates shows how
many updates are available.
Related information
• Online car
* (p. 463)
• Downloading, updating and uninstalling apps (p. 468)
• Remote updates (p. 509)

MAINTENANCE AND SERVICE
* Option/accessory.511
Data transmission between car and workshop6
The time required for a booked visit to a Volvo workshop can be shortened by transmitting trou-bleshooting data as soon as the car stops at theworkshop. The data can be transmitted most conveniently by selecting the option
Automatically connect
when I arrive in settings view in the centre dis-
play.
Each time the car slows to a slow enough speed it starts searching for a Wi-Fi network. If anauthorised Volvo network (at a workshop) isfound, a message is displayed or a pop-up win-dow opens in the centre display. (This does notapply when you connect manually, see the sec-tion "Connecting to a workshop manually"below).
Connecting to a workshop automatically
NOTE
To avoid the driver being disturbed by unwan- ted connection inquiries (for example, if thecar is often parked in the neighbourhood of aworkshop with an authorised Volvo network),the connection mode will change to manual ifthe driver declines connection twice within aperiod of 5 days.
Without driver confirmation
This option provides the most convenient way of transmitting troubleshooting data. The car con-nects without the need for the driver to confirm. If the car stops at the workshop and is switched off with the start knob, a message is shown atthe top in the centre display. The car will connectautomatically when the driver

MAINTENANCE AND SERVICE
514
Opening and closing the bonnet
The bonnet can be opened using the handle in the passenger compartment and a handle underthe bonnet.
Open the bonnet
Pull the handle near the foot pedals to release the bonnet from its fully closed posi-tion.
Turn the handle under the bonnet anticlock- wise to release the bonnet from the lockcatches and lift the bonnet.
Warning - bonnet not closed
When the bonnet is released, the warn- ing symbol and the graphics in thedriver display will light up and anacoustic reminder will sound. If the car
starts rolling, an acoustic warning signal willrepeat. For more information on graphics, see section "Door and seatbelt reminder".
NOTE
If the warning symbol is lit or the warning sig- nal is heard despite the bonnet being closedproperly, contact an authorised Volvo work-shop.
Close the bonnet1. Push the bonnet down until it starts to fall from its own weight.
2. When the bonnet stops against the lock catch, push the bonnet to close it completely.
WARNING
Risk of crushing! Ensure that the closing path under the bonnet is not obstructed, otherwisethere is a risk of personal injury.
WARNING
Check that the bonnet locks properly when closed. The bonnet must engage at bothsides audibly.

MAINTENANCE AND SERVICE
516
Engine oil
An approved engine oil must be used in order that the recommended service intervals can beapplied.
Volvo recommends:
IMPORTANT
In order to fulfil the requirements for the engine's service intervals all engines are filledwith a specially adapted synthetic engine oilat the factory. The choice of oil has beenmade very carefully with regard to service life,starting characteristics, fuel consumption andenvironmental impact. An approved engine oil must be used in order that the recommended service intervals canbe applied. Only use a prescribed grade of oilfor both filling and oil change, otherwise thereis a risk of the service life, starting characte-ristics, fuel consumption and environmentalimpact of the car being affected. If engine oil of the prescribed grade and vis- cosity is not used, engine related componentsmay become damaged. Volvo Car Corporationdisclaims any liability for any such damage. Volvo recommends that oil changes are car- ried out at an authorised Volvo workshop.
Volvo uses different systems for warning of low/ high oil level or low oil pressure. Certain enginevariants have an oil pressure sensor, and then thedriver display's warning symbol for low oil pres- sure
is used. Other variants have an oil
level sensor, when the driver is informed via the driver display's warning symbol
and display texts. Certain variants have both systems. Contact a Volvo dealer for more information. Change the engine oil and oil filter in accordance with the intervals specified in the Service andWarranty Booklet. Using oil of a higher than specified grade is per- mitted. If the car is driven in adverse conditions,Volvo recommends using an oil of a higher gradethan the one specified.
Related information
•
Checking and filling with engine oil(p. 517)
• Adverse driving conditions for engine oil(p. 569)
• Engine oil — specifications (p. 567)

MAINTENANCE AND SERVICE
}}
517
Checking and filling with engine oil The oil level is detected with the electronic oil level sensor.
Filler pipe8
.
In some cases, oil may need to be topped up between service intervals. Action with regard to engine oil level does not need to be taken until a message is shown in thedriver display.
WARNING
If this symbol is shown together with the message Engine oil level
Service required, visit a workshop
- an authorised Volvo workshop is
recommended. The oil level may be too high.
IMPORTANT
If this symbol is shown together with a message about low oil level, such as
Engine oil level low
Refill 1 litre for example, then only
fill the volume specified, e.g. 1 litre.
WARNING
Do not spill oil onto the hot exhaust manifold due to the risk of fire.
Check the oil level
1. Open the Car status app from the app view
in the centre display.
2. Press the
Status button to show the oil
level.
Graphics for oil level in the centre display.
The oil level is checked using the electronic oil level gauge in the centre display when the engineis switched off.
NOTE
The system cannot directly detect changes when the oil is filled or drained. The car musthave been driven approx. 30 km and havebeen stationary for 5 minutes with the engineswitched off and on level ground before theoil level indication is correct.
8 Engines with electronic oil level sensor do not have a dipstick.

||
MAINTENANCE AND SERVICE
518
NOTE
If the right conditions for measuring the oil level (time after engine shutdown, the car'sinclination, outside temperature, etc.) are not met, then the message
No value availablewill be shown in the centre display. This does not mean that there is something wrong in
the car's systems.
Related information
• Engine oil (p. 516)
• Engine oil — specifications (p. 567)
• Adverse driving conditions for engine oil (p. 569)
• Ignition positions (p. 385)
• Car status (p. 506)
Topping up coolant
The coolant cools the internal combustion engine to the correct operating temperature. Theheat that is transferred from the engine to thecoolant can be used to heat the passenger com-partment.
When topping up the coolant, follow the instruc- tions on the packaging. Never top up with wateronly. The risk of freezing increases with both toolittle and too much coolant concentrate.
WARNING
Coolant can be very hot. If the coolant requires topping up when the engine is atoperating temperature, unscrew the expan-sion tank cap slowly to gently release theoverpressure.
Coolant expansion tank, left-hand drive car.
Screw off the cap in the plastic cover.
Screw off the cap on the expansion tank and top up with coolant. The coolant level must not exceed the yellow MAX mark inside the
expansion tank.
Reinstall the parts in reverse order.