2017 VOLVO V90 CROSS COUNTRY wheel bolts

3

Top tether anchors80
Integrated booster cushion *
81
Raising the integrated booster cushion *
83
Stowing the integrated booster cushion *
85
PRACTICAL INFORMATION
Passenger compartment storage spaces
88
Engine compartment overview 89
Using the glove compartment 90
Tunnel console 91
Sun visors 91
Loading 92
Grocery bag holder 94
Cargo net 94
Steel cargo grid *
96
Load anchoring eyelets 97
Cargo compartment cover *
98
Automatically arming/disarming the alarm 100
Octane rating 100
Opening/closing the fuel filler door 101
Tires 102
Tire sidewall designations 104
Wheel (rim) designations 106
Tire terminology 106
Tire direction of rotation 107
Tread wear indicator 108
Loading specifications 108
Uniform Tire Quality Grading 109
Snow tires and chains 110

Checking tire inflation pressure110
Changing tires 112
Tools 112
Jack 113
Spare tire 113
Wheel bolts 115
Removing a wheel 115
Installing a wheel 117
Tire Pressure Monitoring System (TPMS) 117
Checking tire inflation pressure 119
Reinflating tires equipped with the Tire Pressure Monitoring System (TPMS) 120
Calibrating the Tire PressureMonitoring System (TPMS) 121
Tire sealing system 122
Using the tire sealing system 124
Inflating a tire with the tire sealingsystem compressor 127
Electrical sockets 129
Replacing bulbs 132
Removing the rectangular headlightcover 134
Replacing low beam headlight bulbs 135
Replacing High Beam headlight bulbs 135
Replacing front parking light bulbs 136
Replacing front turn signal bulbs 137

PRACTICAL INFORMATION
* Option/accessory.
112
NOTE
• If you overfill the tire, release air by push- ing on the metal stem in the center of thevalve. Then recheck the pressure withyour tire gauge.
• Some spare tires require higher inflationpressure than the other tires. Consult thetire inflation pressure table or the inflationpressure placard.
Changing tires
When changing wheels to another dimension, always follow Volvo's instructions.
When changing to tires of another
dimension
If you mount tires with a dimension other thanthe factory-installed tires, contact an authorizedVolvo retailer to update the vehicle's software.This may also be necessary when changing fromsummer to winter tires, or vice versa.
Related information
• Snow tires and chains (p. 110)
• Spare tire (p. 113)
• Installing a wheel (p. 117)
• Removing a wheel (p. 115)
Tools
Tools for e.g., changing wheels, etc., are located under the cargo compartment floor.
Generic illustration - the appearance and location of the foam block may vary from model to model
The foam block under the cargo compartment floor contains the towing eyelet, the tool for removing plastic wheel bolt covers, the jack * and
the lug wrench *. There is also a storage space for
the tool used to remove locking wheel bolts.
Related information
• Jack (p. 113)
• Changing tires (p. 112)

||
PRACTICAL INFORMATION
114
WARNING
Current legislation prohibits the use of the "Temporary Spare" tire other than as a tem-porary replacement for a punctured tire. Itmust be replaced as soon as possible by astandard tire. Road holding and handling maybe affected with the "Temporary Spare" inuse. Do not exceed 50 mph (80 km/h).
CAUTION
The vehicle must not be driven with wheels of different dimensions or with a spare tire otherthan the one that came with the vehicle. Theuse of different size wheels can seriouslydamage your car's transmission.
CAUTION
The vehicle must never be driven with more than one temporary spare wheel.
The spare tire is located under the floor of the cargo compartment. A retaining bolt holds thespare tire and foam block containing tools inplace.
Accessing the spare tire
1. Lift the rear edge of the cargo compartmentfloor.
2. Unscrew the retaining bolt.
3. Lift out the foam block holding the tools.
4. Lift out the spare tire.
Stowing a flat tire1. Take out the package containing a wheel bag from the foam block and put the wheel in the bag.
2. Return the tools to the foam block and put the foam block bag in the vehicle.
3. 4.
Related information
• Changing tires (p. 112)
• Removing a wheel (p. 115)
• Wheel bolts (p. 115)
• Checking tire inflation pressure (p. 110)

PRACTICAL INFORMATION
}}
* Option/accessory.115
Wheel bolts
The wheel bolts hold the wheel in place.
CAUTION
Wheel bolts should be tightened to 103 ft. lbs. (140 Nm). Over-tightening could damagethe threads.
Only use wheels/rims that have been tested and approved by Volvo and are included in Volvo'sproduct range. Use a torque wrench to check that the wheel bolts are tightened correctly. Never lubricate the wheel bolts' threads.
Locking wheel bolts *A tool for removing locking wheel bolts can be found in the foam block under the cargo com-partment floor.
Related information
•Changing tires (p. 112)
• Installing a wheel (p. 117)
Removing a wheel
Wheel changes should always be carried out correctly.
1. Turn on the hazard warning flashers if the wheel change has to be done near passing traffic.
2. Apply the parking brake and put the gear selector in P.
CAUTION
Models with suspension and level con- trol *:
Turn this function off before raising the vehi- cle. To do so, go to
SettingsVehicleDeactivate Suspension & Leveling Controlin the center display's Top view.
WARNING
• The jack must correctly engage the jack attachment.
• Be sure the jack is on a firm, level, non-slippery surface.
• Never allow any part of your body to beextended under a vehicle supported by ajack.
• Use the jack intended for the vehicle whenchanging a tire. For any other job, usestands to support the vehicle.
• Apply the parking brake and put the gear selector in the Park (
P) position.
• Block the wheels standing on the ground, use rigid wooden blocks or large stones.
• The jack should be kept well-greased andclean, and should not be damaged.
• No objects should be placed between thebase of jack and the ground, or betweenthe jack and the attachment bar on thevehicle.

PRACTICAL INFORMATION
}}
117
Installing a wheel
It is important to install wheels properly.
1. Clean the contact surfaces on the wheel and hub.
2. Lift the wheel and place it on the hub.
3. Install the wheel bolts and tighten hand-tight. Using the lug wrench, tighten crosswise until all bolts are snug.
4. Lower the vehicle to the ground and alter- nately tighten the bolts crosswise to103 ft. lbs. (140 Nm).
5. Press the plastic covers onto the wheel bolts.
CAUTION
• After inflating the tires, always reinstall the valve cap to help avoid damage to thevalve from dirt, gravel, etc.
• Use plastic valve caps only. Metal capscould corrode and become difficult toremove.
Related information
•Wheel bolts (p. 115)
• Jack (p. 113)
Tire Pressure Monitoring System (TPMS) TPMS provides a warning if inflation pressure in one or more tires is too low. It also uses a sym-bol (called a telltale) that will flash for60 seconds and then glow steadily if there is asystem malfunction.
TPMS uses the rotational speed of the tires in combination with signal analysis of the ABS sen-sor signals to determine if they are properly infla-ted. When a tire is under-inflated, its diameter(and consequently also its rotational speed)changes. By comparing the individual tires witheach other it is possible to determine if one ormore tires are under inflated. If inflation pressureis too low, an indicator symbol will illuminate inthe instrument panel and a text message will bedisplayed.
Symbol
Explanation
The symbol illuminates to indicate low tire inflation pressure. If a malfunction occurs in the sys- tem, the tire pressure warning sym-bol will flash for approximately1 minute and then remain illumi-nated.
Each tire, including the spare (if provided), should be checked monthly when cold and inflated to

INDEX
180
T
Technician certification 47
Temporary spare tire 113
Tire inflation pressure 174
Tire Pressure Monitoring System 117, 120calibrating 121
Tire Pressure Monitoring System (TPMS) 121
Tires 102, 112 changing 112
changing from summer to winter 107
glossary of terms 106
improving economy 102
inflation pressure 110
inflation pressure table 174installing (mounting) a wheel on the
vehicle 117
rotation 103
snow 110
spare 113
specifications 104
storing 103
studded 110
tire pressure monitoring system 117, 120
tire sealing system 122, 124, 127
tread wear indicator 108
uniform tire quality grading 109
wheel bolts 115
Tire sealing system 122, 124, 127
Top tether anchors (child restraint sys- tems) 80
Towbar 144 Towing a trailer trailer hitch 144
Trailer hitch 144Trailer towing trailer hitch 144
Transmission oil 175
Tread wear indicator 108Turn signals changing bulbs 137
U
Uniform Tire Quality Grading 109
V
Vehicle Event Data 20
Vehicle information 8
Vehicle loading 92, 108
Vehicle weights 167
Volvo and the environment 9
Volvo ID 21
Volvo On Call Roadside Assistance 8
Volvo programs 8
W
Washer fluid 142 Wheels
changing 112, 115
storing 103
Whiplash Protection System 53 Windows laminated glass 47
Windshield washer fluid reservoir 142
Windshield wiper blades 139Windshield wipers service position 140
Wiper blades replacing 139, 140