2017 TOYOTA YARIS iA change time

34
PAIRING BLUETOOTH® PHONE FOR THE FIRST TIME
Yaris iA Display Audio and Display Audio with Navigation1
To use the hands-free3 features of the Yaris iA Display Audio system, it
is necessary to first pair a compatible Bluetooth®2 mobile device to the
vehicle. This operation cannot be performed while driving.
You can pair up to 7 devices.
1. Activate the Bluetooth
®2
connection setting of your mobile
device. [See Figures 1 & 2]
2. Using the remote commander
knob or touchscreen, select
"Settings
" from the home
screen of the vehicle display (far
right circle)
3. Within "Settings", you will see
tabs on the top. Hit the >> arrow
until the "Devices" tab is available.
Select "Devices". [See Figure 3]
5. Within the "Bluetooth
®" menu,
select "Add New Device". [See
Figure 4] 7. Verify the PIN. Select "Pair" on
your device and select "Yes" on the
head unit. [See Figure 5]
6. On your mobile device, find and
select "My Toyota" or your vehicle
within the Bluetooth
® device list. iPhone
4: Select the icon next to
the paired vehicle on your phone,
and switch the "Show Notifications"
toggle to on. [See Figure 6]
Android: Your device might pop up
two messages asking to allow the
vehicle head unit to access your
contacts and messages. You may
choose to select "Yes" to both.
[See Figure 7] 8. To enable text message notification
on your mobile device, follow the
appropriate directions below:
4. Within the "Devices" tab, select
"Bluetooth
®".[See Figure 3]
1. Availability & accuracy of the information provided by the navigation sys\
tem is dependent upon many factors. Use common sense when
relying on information provided. Services & programming subject to change. Services not available
in every city or roadway. Updates may be available from your dealer at an additional cost. See O\
wner’s Manual for details.
2. The Bluetooth® word mark and logos are registered trademarks owned by\
Bluetooth® SIG, Inc. and any use of
such marks by Toyota is under license. A compatible Bluetooth® enabled phone must fi\
rst be paired. Phone performance depends on soft-
ware, coverage & carrier.
3. Concentrating on the road should always be your first priority while dr\
iving. Do not use the hands-free phone system if it will distract you. 4. iPhone® is not included. iPhone® is registered trademarks of Apple\
, Inc.
Figure 3 Figure 1: iOS
Figure 6: iOS
Figure 2: Android
Figure 7: Android
Figure 4 Figure 5

56
SWITCHING AUDIO SOURCE
1. Press HOME button on the
Commander swtich.
2. Using touch or the Commander
switch to select
.
• The audio system displays the
current audio source screen or
displays the audio source selection
screen.
3. Touch the music note icon and
select the desired audio source. 1. Press HOME button on the
Commander swtich.
2. Using touch or the Commander
switch to select .
3. Select the
tab and select
the sound setting you would like to
change.
PRESETTING A STATION AUDIO SOUND SETTINGS
1. To save a radio preset, tune to
your favorite radio channel.
2. Press the "Favorites" icon

3. At the favorites screen select Add/
Edit Radio Favorites
4. Touch add
Radio mode has a preset function, which can store up to 50 stations
from any of the AM or FM stations.
NAVIGATION: BEFORE USING THE SYSTEM
To use the navigation system (if equipped), the SD card containing the
map information needs to be inserted in the SD card slot.
Please see the Owner's Manual for the location of SD card slot.
Be sure to obey traffic regulations and maintain awareness of road and traffic conditions at all times.

78
NAVIGATION: DESTINATION INPUT BY ADDRESSNAVIGATION: DESTINATION INPUT BY ADDRESS
CONT.
2. Select "Find Address".
3. Select "City or Zip code".
• By default, the navigation system
proposes the country and city where you
are.
4. Enter the Street Name.
5. Select the street from the list. 6. Enter house number then select the
three horizontal line icon on bottom
right
.7. The system shows the destination.
Select "Navigate to"
8. Select "Start" to start the
navigation.
NAVIGATION: SETTING HOME DESTINATION
2. Scroll to the navigation tab on the
top right and select Home.
1. If it's hidden, show the navigation
menu by selecting
, then select
.
3. Complete the fields with your
home address and press the
bottom right icon
.
5. Press "Ok" to confirm.
4. On the navigation verification
screen, select "Set as Home" 1. Press the favorites button on your remote commander
.
You can add any location to Favorites, the list of frequently used
destinations. Your home address can be registered/changed by selecting
"Home" within the Favorites menu.
NOTE: We suggest using a location
near your home as your home
destination, rather than your actual
home address.
Be sure to obey traffic regulations and maintain awareness of road and traffic conditions at all times.