3387-3. Do-it-yourself maintenance
YARIS_HV_OM_Europe_OM52G76E
WARNING
■Used engine oil 
● Used engine oil contains potentially harmful contaminants which may 
cause skin disorders such as inflammation and skin cancer, so care 
should be taken to avoid prolonged and repeated contact. To remove used 
engine oil from your skin, wash thoroughly with soap and water. 
● Dispose of used oil and filters only in a safe and acceptable manner. Do 
not dispose of used oil and filters in household trash, in sewers or onto the 
ground. 
Call any authorized Toyota dealer or repairer, or another duly qualified and 
equipped professional, service station or auto parts store for information 
concerning recycling or disposal. 
● Do not leave used engine oil within the reach of children.
NOTICE
■To prevent serious engine damage 
Check the oil level on a regular basis. 
■ When replacing the engine oil 
● Be careful not to spill engine oil on the vehicle components. 
● Avoid overfilling, or the engine could be damaged. 
● Check the oil level on the dipstick every time you refill the vehicle. 
● Be sure the engine oil filler cap is properly tightened. 
4679-1. Specifications
9
Vehicle specifications
YARIS_HV_OM_Europe_OM52G76E 
■Oil capacity (Drain and refill — reference*)
*: The engine oil capacity is a reference quantity to be used when changing 
the engine oil. Warm up the engine and turn off hybrid system, wait more 
than 5 minutes, and check the oil level on the dipstick. 
■Engine oil selection 
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota 
recommends the use of approved “Toyota Genuine Motor Oil”. 
Another motor oil of matching quality can also be used. 
Oil grade: 
0W-20, 5W-30 and 10W-30: 
API grade SL “Energy-Conserving”, SM “Energy-Conserving” or SN 
“Resource-Conserving”; or ILSAC multigrade engine oil 
15W-40: 
API grade SL, SM or SN multigrade engine oil 
Recommended viscosity (SAE): 
SAE 0W-20 is filled into your 
Toyota vehicle at manufactur- 
ing, and the best choice for 
good fuel economy and good 
starting in cold weather. 
If SAE 0W-20 oil is not avail- 
able, SAE 5W-30 oil may be 
used. However, it should be 
replaced with SAE 0W-20 at the 
next oil change. 
If you use SAE 10W-30 or a 
higher viscosity engine oil in 
extremely low temperatures, 
the engine may become difficult 
to start, so SAE 0W-20 or 
5W-30 engine oil is recom- 
mended.
Lubrication system
With filter 3.7 L (3.9 qt., 3.3 Imp.qt.)
Without filter 3.4 L (3.6 qt., 3.0 Imp.qt.)
Temperature range anticipated  
before next oil change.
Preferred