2017 TOYOTA PRIUS PLUG-IN HYBRID lock

1842-2. Charging
PRIUS PHV_OM_OM47A89E_(EE)
When the hybrid system is started
after charging, a message is dis-
played in the multi-information dis-
play.
When this occurs, follow the
instructions displayed on the
screen.
When charging-related message is displayed
Likely causeCorrection procedure
If “Charging Stopped Connect Plug to Charge” is shown
Charging connector is not securely
connected
Check the connection status of the
charging connector.
If charging cannot be carried out,
even though the proper procedures
were followed, have the vehicle
inspected by any authorized Toyota
dealer or repairer, or another duly
qualified and equipped professional.
Charging connector was unlocked
while charging
When the charging connector is
unlocked while charging, charging
stops. To continue charging, recon-
nect the charging connector.
If “Charging Complete Limited Due to Battery Temp” is shown
Charging was stopped to protect the
hybrid battery (traction battery) as it
continued to remain hot for a certain
period of time.Allow the hybrid battery (traction
battery) to cool down and perform
charging again if the charging
amount has not reached the desired
amount.

1903. Instrument cluster
PRIUS PHV_OM_OM47A89E_(EE)
Combination meter
The units used on the display may differ depending on the target region.
Main display (P. 207)
The main display shows basic information related to driving, such as the
vehicle speed and remaining fuel amount.
Multi-information display (P. 215)
The multi-information display shows information which makes the vehicle
convenient-to-use, such as the hybrid system operation condition, electric-
ity consumption and fuel consumption history. Also, the operation contents
of the driving support systems and the combination meter display settings
can be changed by switching to the settings screen.
Warning lights and indicators (P. 199)
The warning lights and indicators comes on or flashes to indicate problems
with the vehicle or to show the operation status of the vehicle’s systems.
Clock (P. 196)
The large meter uses 2 liquid crystal displays to display informa-
tion such as the vehicle condition, driving status, electricity con-
sumption and fuel consumption.
Combination meter layout
1
2
3
4

1953. Instrument cluster
3
Instrument cluster
PRIUS PHV_OM_OM47A89E_(EE)
Score for each Eco score items (P. 225, 239)
Eco score result and advice
Driving time since the hybrid system started
Distance traveled since the hybrid system started
Average fuel consumption after the hybrid system started
Information for next charge schedule
*2
On/off setting for “Charge Now” (P. 171)
The setting can be switched each time is pressed.
*1: The screen will be turned off immediately if the doors are locked.
*2: It can be displayed when the charge schedules are registered.
(P. 163)
●A check screen for “Traction Battery Cooler” may be displayed
when the hybrid system is stopped. (if equipped) (P. 142)
1
2
3
4
5
6
7

1963. Instrument cluster
PRIUS PHV_OM_OM47A89E_(EE)
To adjust the time, perform operations on the screen (P. 242)
of the multi-information display.
■Adjusting the time
Press or of the meter control switches on the
screen and select .
Press to display the cursor.
Press or of the
meter control switches to
adjust the cursor position,
and then press or to
change the setting.
When the 12-hour display is
selected, “12H” is displayed,
and when the 24-hour display is
selected, “24H” is displayed.
When adjusting minutes, operation automatically starts from 00 sec-
onds.
After changing the settings, press to return to the previous screen.
■
Resetting the minutes display
Press or of the
meter control switches on the
screen and select
.
Press .
The minutes display switches to “00”.*
*
: e.g. 1:00 to 1:29  1:00
1:30 to 1:59  2:00
Clock adjustment
1
2
3
1
2

1973. Instrument cluster
3
Instrument cluster
PRIUS PHV_OM_OM47A89E_(EE)
■The meters and display illuminate when
The power switch is in ON mode.
■Adjusting the instrument cluster brightness (P. 192)
●The brightness levels that can be selected differ depending on whether the
tail lights are on and surrounding brightness levels, as shown in the table
below.
*: 22 levels of the brightness are displayed on the setting screen. However,
the brightness setting will be the brightest when other than 1st level (the
darkest) is selected. If other than 1st or 22nd level is selected, when the
tail lights are turned on in a dark place, the instrument cluster brightness
setting will be the selected level.
●If the taillights are illuminated in a dark environment, the instrument cluster
light dims. However, when the brightness of the instrument cluster is set to
minimum or maximum (1st or 22nd level of the instrument cluster bright-
ness), even if the taillights are illuminated, the instrument cluster light will
not dim.
■When disconnecting and reconnecting 12-volt battery terminals
The settings of the clock will be reset.
■Calendar settings
●Until the calendar settings are set, the check screen is displayed every time
the power switch is turned to ON mode.
●After the calendar information is set, it can be changed in the “Meter Custo-
mize” settings. (P. 245)
The tail lights are offThe tail lights are on
In a bright place2 levels*2 levels*
In a dark place22 levels
If calendar recording is interrupted due to
replacement of the 12-volt battery or 12-
volt battery discharge, etc., when the
power switch is turned to ON mode after
maintenance, the calendar settings check
screen is automatically displayed on the
multi-information display.
●If date information is not set, the electric-
ity and fuel consumption record cannot
be stored correctly. When the calendar
settings check screen is displayed,
make sure to always set the settings.
(P. 242)

2203. Instrument cluster
PRIUS PHV_OM_OM47A89E_(EE)■
While the solar charging system is operating (if equipped)
The current approximate solar power generation level is displayed
on the energy monitor. (The display changes in 5 levels.)
Indicates that solar power
generation is not being per-
formed
Indicates that the amount of
solar power generation is
near the maximum
■When the charging connector is locked (P. 154)
■When the solar charging system is malfunctioning (if equipped)
1
2
is displayed in the charging connector
display portion on the energy monitor.
The mark indicating a malfunction is dis-
played in the solar roof display portion on
the energy monitor. If the mark is dis-
played, have the vehicle inspected by any
authorized Toyota dealer or repairer, or
another duly qualified and equipped pro-
fessional immediately.

2443. Instrument cluster
PRIUS PHV_OM_OM47A89E_(EE)
*1: If equipped
*2: Right-hand drive vehicles only
Clock setting
Adjusts the clock. (P. 196)
Sets the minutes to “00”. (P. 196)
“Meter Customize” settings: P. 245
“Vehicle Settings” settings: P. 708
ItemSettingsSetting result

263
4
Operation of
each component
PRIUS PHV_OM_OM47A89E_(EE)4-1. Key information
Keys ................................... 264
4-2. Opening, closing and
locking the doors
Side doors.......................... 269
Back door........................... 274
Smart entry & start
system ............................. 279
4-3. Adjusting the seats
Front seats ......................... 296
Rear seats ......................... 297
Head restraints .................. 299
4-4. Adjusting the steering
wheel and mirrors
Steering wheel ................... 302
Inside rear view mirror ....... 304
Outside rear view
mirrors ............................. 305
4-5. Opening and closing the
windows
Power windows .................. 307