2017 TOYOTA PRIUS PLUG-IN HYBRID power steering

3
1
9
8
7
6
5
4
2
PRIUS PHV_OM_OM47A89E_(EE)
3
3. Instrument cluster
Combination meter ............190
Warning lights and
indicators .........................199
Main display .......................207
Multi-information display ....215
Head-up display .................249
Energy monitor/
consumption screen ........256
4-1. Key information
Keys ...................................264
4-2. Opening, closing and
locking the doors
Side doors..........................269
Back door...........................274
Smart entry & start
system .............................279
4-3. Adjusting the seats
Front seats .........................296
Rear seats .........................297
Head restraints ..................299
4-4. Adjusting the steering
wheel and mirrors
Steering wheel .................. 302
Inside rear view mirror....... 304
Outside rear view
mirrors ............................. 305
4-5. Opening and closing the
windows
Power windows ................. 307
5-1. Before driving
Driving the vehicle ............. 312
Cargo and luggage............ 324
Trailer towing..................... 326
5-2. Driving procedures
Power (ignition) switch ...... 327
Hybrid transmission........... 333
Turn signal lever................ 339
Parking brake .................... 340
5-3. Operating the lights
and wipers
Headlight switch ................ 341
AHS (Adaptive High-beam
System) ........................... 345
Fog light switch ................. 351
Windshield wipers and
washer ............................ 352
5-4. Refueling
Opening the fuel tank
cap .................................. 355
3Instrument cluster
4Operation of each
component
5Driving

TABLE OF CONTENTS4
PRIUS PHV_OM_OM47A89E_(EE)5-5. Using the driving
support systems
Toyota Safety Sense .........359
PCS (Pre-Crash Safety
system) ............................368
LDA (Lane Departure Alert
with steering control) .......382
RSA (Road Sign Assist).....392
Dynamic radar cruise
control with full-speed
range ...............................397
Driving mode select
switch...............................412
Speed limiter ......................414
BSM
(Blind Spot Monitor) .........417
• The Blind Spot Monitor
function ..........................423
• The Rear Crossing
Traffic Alert function.......427
Toyota parking
assist-sensor ...................432
Intelligent Clearance
Sonar ...............................443
S-IPA (Simple Intelligent
Parking Assist
System) ...........................456
Driving assist systems .......491
5-6. Driving tips
Winter driving tips ..............4986-1. Using the air conditioning
system and defogger
Automatic air conditioning
system............................. 504
Remote Air Conditioning
System ............................ 516
Seat heaters ...................... 520
6-2. Using the interior lights
Interior lights list ................ 522
• Front interior light .......... 523
• Front personal lights ..... 523
• Rear interior light .......... 524
6-3. Using the storage features
List of storage features...... 525
• Glove box ...................... 526
• Console box .................. 526
• Cup holders .................. 527
• Bottle holders/
door pockets ................. 528
• Auxiliary boxes .............. 529
Luggage compartment
features ........................... 530
6-4. Using the other interior
features
Other interior features ....... 535
• Sun visors ..................... 535
• Vanity mirrors ................ 535
• Power outlets ................ 536
• Wireless charger ........... 537
• Coat hooks .................... 543
• Assist grips ................... 543
6Interior features

841-3. Theft deterrent system
PRIUS PHV_OM_OM47A89E_(EE)
The intrusion sensor detects intruders or movement in the vehicle.
This system is designed to deter and prevent vehicle theft but does
not guarantee absolute security against all intrusions.
■Setting the intrusion sensor
The intrusion sensor will be set automatically when the alarm is set.
( P. 8 1 )
■Canceling the intrusion sensor
If you are leaving pets or other moving things inside the vehicle,
make sure to disable the intrusion sensor before setting the alarm,
as they will respond to movement inside the vehicle.
Turn the power switch off.
A message is displayed on the multi-information display for approxi-
mately 4 seconds asking if you wish to cancel the intrusion sensor.
Press or of the
meter control switch on the
steering wheel, select “Yes”
and then press .
If an operation is not performed
for approximately 5 seconds,
the message will be automati-
cally extinguished and the intru-
sion sensor will not be canceled.
The intrusion sensor will revert to on each time the power switch is
turned to ON mode.
Intrusion sensor (if equipped)
1
2

2003. Instrument cluster
PRIUS PHV_OM_OM47A89E_(EE)
Warning lights inform the driver of malfunctions in any of the vehicle’s
systems.
Warning lights
Warning lightsPages
*1Brake system warning light (Red) P. 641
*1Brake system warning light (Yellow) P. 641
*1Charging system warning light P. 641
*1Low engine oil pressure warning light P. 642
*1Malfunction indicator lamp P. 642
*1SRS warning light P. 642
*1ABS warning light P. 642
*1Electric power steering system warning light
(Red/yellow) P. 642
*1, 2PCS warning light P. 643
*1Slip indicator light P. 643
*1High coolant temperature warning light P. 644
*1, 2ICS OFF indicator (if equipped) P. 644
Open door warning light P. 644
Low fuel level warning light P. 644

2053. Instrument cluster
3
Instrument cluster
PRIUS PHV_OM_OM47A89E_(EE)■
Multi-information display (symbol display*)
*: These symbols are displayed along with a message. Also, the symbol dis-
plays listed here are only an example, and different symbols may be dis-
played according to the contents of the multi-information display.
■BSM (Blind Spot Monitor) outside rear view mirror indicators
(if equipped) (P. 417)
• When the BSM function is enabled on the screen of the multi-infor-
mation display, the power switch is turned to ON mode.
If the system is functioning correctly, the BSM outside rear view mirror indi-
cators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not
turn off, there may be a malfunction in the system.
If this occurs, have the vehicle inspected by any authorized Toyota dealer
or repairer, or another duly qualified and equipped professional.
Symbol displayPages
Smart entry & start system P. 327
Brake Override System/Drive-Start Control/
Intelligent Clearance Sonar (if equipped)P. 646
LDA (Lane Departure Alert with steering con-
trol) systemP. 646
P. 646
●Indicators are also displayed on the out-
side rear view mirrors.
●In order to confirm operation, the BSM
outside rear view mirror indicators illumi-
nate in the following situations:
• When the power switch is in ON
mode, the BSM function is enabled
on the screen of the multi-infor-
mation display.

263
4
Operation of
each component
PRIUS PHV_OM_OM47A89E_(EE)4-1. Key information
Keys ................................... 264
4-2. Opening, closing and
locking the doors
Side doors.......................... 269
Back door........................... 274
Smart entry & start
system ............................. 279
4-3. Adjusting the seats
Front seats ......................... 296
Rear seats ......................... 297
Head restraints .................. 299
4-4. Adjusting the steering
wheel and mirrors
Steering wheel ................... 302
Inside rear view mirror ....... 304
Outside rear view
mirrors ............................. 305
4-5. Opening and closing the
windows
Power windows .................. 307

3044-4. Adjusting the steering wheel and mirrors
PRIUS PHV_OM_OM47A89E_(EE)
Inside rear view mirror
Responding to the level of brightness of the headlights of vehicles
behind, the reflected light is automatically reduced.
Changing automatic anti-glare
function mode
On/off
When the automatic anti-glare
function is in ON mode, the indica-
tor illuminates.
The function will set to ON mode
each time the power switch is
turned to ON mode.
Pressing the button turns the func-
tion to OFF mode. (The indicator
also turns off.)
■ To prevent sensor error
The rear view mirror’s position can be adjusted to enable suffi-
cient confirmation of the rear view.
Anti-glare function
Indicator
To ensure that the sensors operate prop-
erly, do not touch or cover them.
WARNING
Do not adjust the position of the mirror while driving.
Doing so may lead to mishandling of the vehicle and cause an accident,
resulting in death or serious injury.

3064-4. Adjusting the steering wheel and mirrors
PRIUS PHV_OM_OM47A89E_(EE)
■Mirror angle can be adjusted when
The power switch is in ACCESSORY or ON mode.
■ When the mirrors are fogged up
The outside rear view mirrors can be cleared using the mirror defoggers. Turn
on the rear window defogger to turn on the outside rear view mirror defog-
gers. ( P. 509)
■ Using automatic mode in cold weather
When automatic mode is used in cold weather, the door mirror could freeze
up and automatic stowing and return may not be possible. In this event,
remove any ice and snow from the door mirror, then either operate the mirror
using manual mode or move the mirror by hand.
■ Customization
The automatic mirror folding and extending operation can be changed.
(Customizable features: P. 708)
WARNING
■Important points while driving
Observe the following precautions while driving.
Failing to do so may result in loss of control of the vehicle and cause an
accident, resulting in death or serious injury.
● Do not adjust the mirrors while driving.
● Do not drive with the mirrors folded.
● Both the driver and passenger side mirrors must be extended and properly
adjusted before driving.
■ When a mirror is moving
To avoid personal injury and mirror malfunction, be careful not to get your
hand caught by the moving mirror.
■ When the mirror defoggers are operating
Do not touch the rear view mirror surfaces, as they can become very hot
and burn you.