2017 TOYOTA LAND CRUISER check engine

4
OVERVIEWInstrument cluster
For details, refer to “Indicators and warning lights,” Section 2-2\
, 2017 Owner’s
Manual.
Engine oil pressure gauge Tachometer
Multi-Information Display (MID)
Speedometer
Voltmeter
Fuel gauge
Odometer and trip meter display
Shift position and range display
Odometer/trip meter display change button
Instrument panel light control dial
Engine coolant temperature gauge
Vehicles with a monochrome display
Charging system warning Low engine oil pressure warning
Low Tire Pressure Warning
Malfunction/Check Engine indicator
2
Master warning1,2
Driver seat belt reminder
(alarm will sound if speed is over 12 mph)
Open door warning
Front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
Airbag SRS warning1
Indicator symbols
Service indicators and reminders

8
OVERVIEW
NOTE: Tighten until one click is
heard. If the cap is not tightened
enough, Check Engine “
”
indicator may
illuminate.
Pull
Turn to open
Store
Pull up latch and
raise hood
Pull
Fuel tank door release and cap
Hood release

24
Crawl Control
Multi-terrain Monitor
FEATURES & OPERATIONS
Speed selection switch
LoHi(1)
(2)
Med
Lo-MedMed-Hi
Speed modes
Press “” switch while the engine switch is in IGNITION ON mode to check
vehicle surroundings.
Note: The amount of time that the screen is displayed changes according to
the vehicle speed at the time the VIEW switch was pressed. Speeds exceeding
approximately 7 mph (12 km/h) will cancel monitor viewing.
Refer to the Owner‘s Manual for limitations and more details on this \
system before
attempting to use it.
Crawl Control allows travel on extremely rough off-road surfaces at a fi\
xed low
speed without pressing the accelerator or brake pedal. Operating status \
displays
on the MID.
Lo to Lo-Med - Rock, mogul (downhill) and gravel (downhill)
Lo-Med to Med - Mogul (uphill)
Med-Hi - Snow, mud, gravel (uphill), sand, dirt, mogul (uphill) and grass