2017 TOYOTA AURIS stop start

881-2. Theft deterrent system
UK AURIS_HB_EE (OM12K97E)
Do one of the following to deactivate or stop the alarm:
●Unlock the doors using the entry function (if equipped) or wireless
remote control.
●Start the engine. (The alarm will be deactivated or stopped after a
few seconds.)
■System maintenance
The vehicle has a maintenance-free type alarm system.
■Items to check before locking the vehicle
To prevent unexpected triggering of the alarm and vehicle theft, make sure of
the following:
●Nobody is in the vehicle.
●The windows are closed before the alarm is set.
●No valuables or other personal items are left in the vehicle.
Deactivating or stopping the alarm
UK AURIS_HB_OM_Europe_OM12K97E.book 88 ページ ２０１６年６月２７日　月曜日　午後５時４２分

932. Instrument cluster
UK AURIS_HB_EE (OM12K97E)
2
Instrument cluster
Warning lights inform the driver of malfunctions in the indicated vehi-
cle’s systems.
Warning lights
*1Brake system warning
light (P. 541)
(Yellow)
(if equipped)
Speed limiter indicator
(P. 542)
*1
(if equipped)
Charging system warn-
ing light (P. 541)*1
Slip indicator (P. 543)
*1
(if equipped)
Low engine oil pressure
warning light (P. 541)*1, 2
(if equipped)
PCS warning light
(P. 543)
*1
(if equipped)
High engine coolant
temperature warning
light (P. 541)*1, 2
(if equipped)
Stop & Start cancel indi-
cator (P. 543)
*1
Malfunction indicator
lamp (P. 542)*1
(if equipped)
Fuel filter warning light
(P. 544)
*1
SRS warning light
(P. 542)*1
(if equipped)
Low engine oil level
warning light (P. 544)
*1
ABS warning light
(P. 542)*1
(if equipped)
Engine oil change
reminder light (P. 544)
*1Electric power steering
system warning light
(P. 542)*1
(if equipped)
DPF system warning
light (P. 544)
(Yellow)
(if equipped)
Cruise control indicator
(P. 542)
(if equipped)
Open door warning light
(P. 545)
UK AURIS_HB_OM_Europe_OM12K97E.book 93 ページ ２０１６年６月２７日　月曜日　午後５時４２分

952. Instrument cluster
UK AURIS_HB_EE (OM12K97E)
2
Instrument cluster
The indicators inform the driver of the operating state of the vehicle’s
various systems.
Indicators
Turn signal indicator
(P. 233)
(if equipped)
LDA (Lane Departure
Alert) indicator
(P. 271)
(if equipped)
Tail light indicator
(P. 235)
(if equipped)
Toyota parking
assist-sensor indicator
(P. 308)
Headlight high beam
indicator (P. 235)
(if equipped)
Simple-IPA indicator
(P. 315)
*1
(if equipped)
Automatic High Beam
indicator (P. 276)*1
(if equipped)
“TRC OFF” indicator
(P. 333)
(if equipped)
Front fog light indicator
(P. 241)*1, 2Slip indicator
(P. 333)
Rear fog light indicator
(P. 241)
*1VSC OFF indicator
(P. 333)
(Green)
(if equipped)
Cruise control indicator
(P. 299)*1
(if equipped)
PCS warning light
(P. 258)
(if equipped)
Cruise control “SET”
indicator (P. 299)*1
(if equipped)
Stop & Start indicator
(P. 286)
(Green)
(if equipped)
Speed limiter indicator
(P. 304)*1
(if equipped)
Stop & Start cancel indi-
cator (P. 286)
UK AURIS_HB_OM_Europe_OM12K97E.book 95 ページ ２０１６年６月２７日　月曜日　午後５時４２分

1002. Instrument cluster
UK AURIS_HB_EE (OM12K97E)
■The meters and display illuminate when
Vehicles without a smart entry & start system
The engine switch is in the “ON” position.
Vehicles with a smart entry & start system
The engine switch is in IGNITION ON mode.
■Outside temperature display
●In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change.
• When stopped, or driving at low speeds (less than 15 km/h [9 mph])
• When the outside temperature has changed suddenly (at the entrance/
exit of a garage, tunnel, etc.)
●If “ ” is displayed continuously, the system may be malfunctioning. Take
your vehicle to any authorized Toyota dealer or repairer, or another duly
qualified and equipped professional.
NOTICE
■To prevent damage to the engine and its components
●Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
●In the following situations, the engine may be overheating. In this case,
immediately stop the vehicle in a safe place, and check the engine after it
has cooled completely. (P. 600)
• 3-ring meter: The high engine coolant temperature warning light comes
on
• 2-ring meter: The engine coolant temperature gauge enters the red
zone
UK AURIS_HB_OM_Europe_OM12K97E.book 100 ページ ２０１６年６月２７日　月曜日　午後５時４２分

1012. Instrument cluster
UK AURIS_HB_EE (OM12K97E)
2
Instrument cluster
The multi-information display presents the driver with a variety of driv-
ing-related data, such as the current outside temperature.
●Engine coolant temperature
gauge (P. 98)
●Outside temperature (P. 9 8 )
●Shift position and gear position
indicator (if equipped)
(P. 223)
●Trip information/Drive informa-
tion/Meter light control
(P. 102)
Displays the following items:
•Odometer
•Trip meter
• Stop & Start system operation time (if equipped)
• Stop & Start system total operation time (if equipped)
• Average fuel consumption
• Driving range
• Meter light control
●Display customization (P. 104)
• Eco Driving Indicator Light (if equipped)
• Stop & Start system operation time (if equipped)
Multi-information display (3-ring meter)
Display content
UK AURIS_HB_OM_Europe_OM12K97E.book 101 ページ ２０１６年６月２７日　月曜日　午後５時４２分

1022. Instrument cluster
UK AURIS_HB_EE (OM12K97E)
◆Changing the display
To change the displayed item,
press the display change switch
or the “DISP” switch.
Each time the switch is pressed,
the displayed item will be
changed.
◆Display items
■Odometer
“ ” will be displayed.
Displays the total distance the vehicle has been driven.
■Trip meter A/trip meter B
“ ”/“ ” will be displayed.
Displays the distance the vehicle has been driven since the meter
was last reset. Trip meters A and B can be used to record and dis-
play different distances independently.
To reset, display the desired trip meter and press and hold the display
change switch or the “DISP” switch.
■
Stop & Start system operation time (if equipped)
“ ” will be displayed.
Displays the amount of time the engine was stopped due to the
operation of the Stop & Start system during the current trip (from
when the engine was started until it is turned off).
■Stop & Start system total operation time (if equipped)
“ ” will be displayed.
Displays the total amount of time that the engine has been stopped
due to the operation of the Stop & Start system since the meter was
last reset.
To reset, display the Stop & Start system total operation time and press
and hold the display change switch or the “DISP” switch.
Trip information/Drive information/Meter light control
UK AURIS_HB_OM_Europe_OM12K97E.book 102 ページ ２０１６年６月２７日　月曜日　午後５時４２分

1042. Instrument cluster
UK AURIS_HB_EE (OM12K97E)
The following display items can be customized:
◆Customizable items
■Eco Driving Indicator Light (if equipped)
Can be enabled or disabled
■Stop & Start system operation time pop-up display (if
equipped)
Current Stop & Start system operation time can be enabled or dis-
abled.
◆Customizing the display
To change to the customizing mode screen, display the odometer
and then press and hold the display change switch or the “DISP”
switch for 5 seconds or more.
To change the setting, press the display change switch or the
“DISP” switch.
Each time the switch is pressed, the setting will be changed.
After customization, press the display change switch or “DISP”
switch for 2 seconds or more to return to the odometer.
Display customization
1
2
UK AURIS_HB_OM_Europe_OM12K97E.book 104 ページ ２０１６年６月２７日　月曜日　午後５時４２分

1052. Instrument cluster
UK AURIS_HB_EE (OM12K97E)
2
Instrument cluster
■Eco Driving Indicator (if equipped)
Eco Driving Indicator will not operate under the following conditions:
●The shift lever is in any position other than D.
●A paddle shift switch (if equipped) is operated.
●Sport mode is selected.
●The vehicle speed is approximately 130 km/h (80 mph) or higher.
■Stop & Start system operation time pop-up display (if equipped)
When enabled (P. 104), the current Stop & Start system operation time will
be displayed on the multi-information display.Eco Driving Indicator Light
During Eco-friendly acceleration (Eco
driving), the Eco Driving Indicator Light
will turn on. When the acceleration
exceeds the Zone of Eco driving, or
when the vehicle is stopped, the light
turns off.
Eco Driving Indicator Zone Display
Suggests the Zone of Eco driving with
current Eco driving ratio based on
acceleration.
Eco driving ratio based on acceleration
If the acceleration exceeds the Zone of Eco driving, the right side of the
Eco Driving Indicator Zone Display blinks and the Eco Driving Indicator
light will turn off.
Zone of Eco driving
1
2
3
4
UK AURIS_HB_OM_Europe_OM12K97E.book 105 ページ ２０１６年６月２７日　月曜日　午後５時４２分