Adaptive Cruise Control
47
●Canceling the stay-stopped function
If any of the following operations is performed, the stay-stopped function will be canceled
and the Adaptive Cruise Control will be canceled at the same time.
x The brake pedal is depressed.
x The (CRUISE) switch is pressed.
x The electronic parking brake switch is pressed to apply the Electronic Parking Brake.
●Setting Adaptive Cruise Control while the Electronic Parking Brake is applied
If the Electronic Parking Brake is applied, then before setting cruise control, release the
Electronic Parking Brake by depressing the accelerator pedal or by other specified
means. For details of how to release the electronic parking brake, refer to the Owner’s
Manual for your vehicle.
WARNING
xWhile the stay-stopped function is engaged, do not exit the vehicle.
x The stay-stopped function is not a replacement for engaging the parking
brake.
When parking, always apply brakes manually to come to a full stop, then
set the electronic parking brake.
CAUTION
The stay-stopped function of cruise control will be canceled under the follow-
ing conditions:
x The vehicle is in stay-stopped mode for approximately 2 minutes or more.
(A buzzer will sound 5 intermittent beeps and 1 long beep.)
x Any condition in which automatic cancellation is met. (A buzzer sounds 1
long beep.)
Ÿ Refer to page 49.
After the stay-stopped function has been canceled, the Electronic Parking
Brake will be automatically applied and the electronic parking brake indicator
light will illuminate. However, if any canceling condition for the Electronic
Parking Brake (i.e. the interlock system with the accelerator pedal, switch
operation of the electronic parking brake, etc.) is fulfilled, the Electronic Park-
ing Brake will not work. (For details, refer to the Owner’s Manual for your
vehicle.)
If the accelerator pedal is only slightly depressed while the stay-stopped func-
tion is activated, the stay-stopped function of cruise control may be canceled,
and the Electronic Parking Brake may not work.
