2017 SUBARU IMPREZA Navigation Manual

3. When this screen is displayed, search for the device
name displayed on this screen on the screen of your
Bluetooth phone/device.

7. Check that the following pop-up screen is displayed
when the connection is complete.

4. Check that “Connected” is displayed next to the
Bluetooth phone/device when the connection is
complete.

DELETING Bluetooth PHONES/DEVICES
1. Display the phone settings screen. (
WP.55)
2. Select the desired Bluetooth phone/device.
3. Select Delete (Delete).
4. Select Delete (Delete) when the con

SETTING THE AUTOMATIC CONNECTION
PRIORITY
The automatic connection priority of the registered Bluetooth
phones/devices can be changed.
1. Display the phone settings screen. (
WP.55)
2. Select the Bluetooth phone/device to be set.
3. Select (Reorder).
4. Select next to the desired Bluetooth phone/device,
and then drag it to the desired position.
Settings
3
Bluetooth® SETTINGS
61
Settings
3
docstructure.indb 612016/10/27 15:27:44

OTHER SETTINGS
GENERAL SETTINGS
1. Press .
2. Select Settings (Settings).
3. Select General (General).
4. Select the items to be set.
GENERAL SETTINGS SCREEN
OTHER SETTINGS
62
docstructure.indb 622016/10/27 15:27:45

No.FunctionPage
Select to set the driver pro

No.FunctionPage
Select to change the language.When
(Synchronized Language Settings) is selected, the language setting in the system is synced to the language setting in the meter cluster.
-
Select to change the unit of measure for distance.
When (Units
synchronized) is selected, the unit of measure setting in the system is synced to the unit of measure setting in the meter cluster.
-
Select to set the length of time that the camera image remains displayed when the shift lever/select lever is shifted from “R” to “D”.-
Select to update system software versions. 70
Select to turn the available new system software version check on/off.70
Select to turn the automatic downloading of updates on/off.70
Select to display the system information.-
Select to change the Bluetooth system name. -
No.FunctionPage
Select to reset all setup items.The audio system restarts automatically after resetting factory data. To complete the reset process, turn the ignition switch to the “LOCK”/“OFF” position after the audio system has restarted, and then turn to the “ACC” or “ON” position after approximately 3 minutes.
-
*2Select to automatically adjust Daylight Saving Time.-
Select to display the software license.-
*1: 8-inch with Navi system/8-inch system only
*2: Only for 8-inch with Navi system. It may be available depending on the software version.
SETTING THE DRIVER PROFILE
ADDING A NEW PROFILE
1. Display the general settings screen. (
WP.62)
2. Select (Driver Pro