Page 49 of 224
REAR VIEW CAMERA
49
Basic Function
2
NOTE
lIf you shift to the “R” range shortly after turning on the ignition switch, the warning message “Check Surroundings Before Backing Up” may not be displayed. Wait for several seconds or more after turning on the ignition switch before shifting to the “R” range. Then the warning message will be displayed.
DIFFERENCE BETWEEN SCREEN IMAGE AND
ACTUAL ROAD
The distance markers show the distance for a level road
when the vehicle is not loaded. It may be different from the
actual distance depending on the loading conditions or road
conditions.
XWhen there is an upward slope at the back
3 feet (1 m)
Page 56 of 224
XWhen setting the Bluetooth phone/device
4. Select the desired Bluetooth phone/device.
5. Select the item to be set.
No.FunctionPage
Connecting or disconnecting Bluetooth phones/devices58
Deleting Bluetooth phones/devices60
Setting phonebook download60
Setting the automatic connection priority 61
NOTE
lThe phone settings screen can also be displayed by selecting
(Change Device) on the phone overview
s c r e e n (W P . 7 6 ) o r B l u e t o o t h a u d i o o p e r a t i o n s c r e e n (W P . 1 4 4 ) .
REGISTERING A Bluetooth PHONE/DEVICE
Up to 5 Bluetooth phones/devices can be registered.
Bluetooth compatible phones (HFP) and devices (AVP) can
be registered simultaneously.
This operation cannot be performed while driving.
1. D i s p l a y t h e p h o n e s e t t i n g s s c r e e n . (W P . 5 5 )
2. Select (Add Device).
Page 57 of 224
3. When this screen is displayed, search for the device
name displayed on this screen on the screen of your
Bluetooth phone/device.
Page 58 of 224
7. Check that the following pop-up screen is displayed
when the connection is complete.
Page 59 of 224
4. Check that “Connected” is displayed next to the
Bluetooth phone/device when the connection is
complete.
Page 64 of 224

No.FunctionPage
Select to change the language.When
(Synchronized Language Settings) is selected, the language setting in the system is synced to the language setting in the meter cluster.
-
Select to change the unit of measure for distance.
When (Units
synchronized) is selected, the unit of measure setting in the system is synced to the unit of measure setting in the meter cluster.
-
Select to set the length of time that the camera image remains displayed when the shift lever/select lever is shifted from “R” to “D”.-
Select to update system software versions. 70
Select to turn the available new system software version check on/off.70
Select to turn the automatic downloading of updates on/off.70
Select to display the system information.-
Select to change the Bluetooth system name. -
No.FunctionPage
Select to reset all setup items.The audio system restarts automatically after resetting factory data. To complete the reset process, turn the ignition switch to the “LOCK”/“OFF” position after the audio system has restarted, and then turn to the “ACC” or “ON” position after approximately 3 minutes.
-
*2Select to automatically adjust Daylight Saving Time.-
Select to display the software license.-
*1: 8-inch with Navi system/8-inch system only
*2: Only for 8-inch with Navi system. It may be available depending on the software version.
SETTING THE DRIVER PROFILE
ADDING A NEW PROFILE
1. D i s p l a y t h e g e n e r a l s e t t i n g s s c r e e n . (W P . 6 2 )
2. Select ( D r i v e r P r o
Page 69 of 224