2017 SUBARU FORESTER display

EyeSight malfunction and temporary stop
90
Displayed screenCauseAction
x When the EyeSight
system is starting
x When the system has
determined that the
vehicle is extremely
inclined
x When the pre-collision
secondary braking has
operated 3 times after the
engine was started
x When the engine is
stopped
x When the electronic
power steering system is
in the overheating
prevention status because
the steering wheel has
been operated while the
vehicle is at a standstill or
driving at an extremely
slow speed
x When the EyeSight
system judged a different
value due to the removal
or installation of the
steering wheel
x When wheel alignments
are deviated The system will restart once
the cause has been
eliminated. At this time, it
may take some time for the
system to restart.
If the system does not
restart, even after the
conditions have improved
and a period of time has
elapsed, contact your
SUBARU dealer for an
inspection.
NOTE
x
When the EyeSight temporary stop indicator is illuminated, no EyeSight
functions can be used except for Conventional Cruise Control.
x When the EyeSight temporary stop indicator is illuminated, the RAB
system will not operate.
S00694

Customizing functions
91
Customizing functions
The following settings can be changed on the multi information display.
■How to customize
Operations can be performed when the select
lever is in the position and the ignition
switch is in the ON position while the vehicle
is parked.
(1) Pull the / switch toward you to
display the “Change settings” screen.
Keep pulling the (Info)/SET switch to
change to the settings screen.
(2) Pull the / switch toward you, select “EyeSight”, and pull the (Info)/SET
switch to confirm.
The system will then switch to the
EyeSight settings screen.
Operate the following switches according to
what is displayed on the screen. x Select: (Return) switch/
(Send) switch
x Confirm: (Info)/SET switch Item Setting Default setting
EyeSight Warning Volume Max/Mid/Min Mid
Lead Vehicle Acquisition Sound ON/OFF ON
Lead Vehicle Moving Monitor Function ON/OFF ON
NOTE
The following settings can be restored to the factory (default) settings.
Ÿ Refer to the Owner’s Manual for your vehicle.
P

Customizing functions
92
●Warning Volume setting
The volume can be set to Max/Mid/Min.
When on the Warning Volume settings screen, if the volume is selected with the /
switch, 3 short beeps will sound.
●Lead Vehicle Acquisition Sound setting
The Lead Vehicle Acquisition Sound setting can be activated (ON) or deactivated (OFF).
●Lead Vehicle Moving Monitor Function
The Lead Vehicle Start Alert function setting can be activated (ON) or deactivated (OFF).
●Canceling the custom functions
In the following cases, the custom functions will be canceled and the “Change settings”
screen will be displayed. x When you keep pulling the (Info)/SET switch toward you
x When the engine is turned off
x When the switch is not operated for approximately 30 seconds
NOTE
When “Return” is selected, the system will return to the screen directly above
the current one.

Message screen list
93
Message screen list
If an EyeSight warning or malfunction is detected, a message will be displayed on the multi
information display. Depending on the message, a buzzer will sound at the same time.
If a message is displayed, refer to the
message list and take the appropriate action.
While the mark is illuminated, pull the
(Info)/SET switch to indicate the message
again.
A
EF
A
EF
A
EF
Normal indicatorNormal indicator
mark
Message indicator
EyeSight Off
Check Manual
S02338
S02148

Message screen list
94
■Message screen list (precautions and notices)
Item Displayed screen mark Action
Pre-Collision Braking
System None
ŸRefer to page 29.
The “brake more”
warning None
ŸRefer to page 52.
Pre-Collision Throttle
Management None
ŸRefer to page 62.
Lane Departure Warning None
ŸRefer to page 68.
Steering operation not
detected by Lane Keep
Assist None
ŸRefer to page 54.
Lane Sway Warning None
ŸRefer to page 71.
Lead vehicle Start alert None
ŸRefer to page 74.
Adaptive Cruise Con-
trol/Conventional Cruise
Control automatic can-
cellation (when the grade
of the road is very steep) None
ŸRefer to pages
49 and 83.
S00695
S00696
Keep Hands On
Steering Wheel
S01997
S00697
S00698
S02219
Cruise Control Cancelled Steep Hill

Message screen list
95
■Message screen list (malfunction, temporary stop)
Item Displayed screen mark Action
EyeSight System
Malfunction Yes
(yellow)
ŸRefer to page 88.
EyeSight system
temporary stop Yes
(white)
ŸRefer to page 89.
Yes
(white)
ŸRefer to page 89.
Yes
(white)
ŸRefer to page 90.
S00699
S00700
S00701
S00694

96
Troubleshooting
Adaptive Cruise control cannot be set.
Did you remember to press the (CRUISE) switch?
If you have not pressed the (CRUISE) switch, (Adaptive Cruise
Control) will not be shown.
Is EyeSight operation temporarily stopped?
When EyeSight is temporarily stopped, is displayed on the multi information
display.
Set cruise control again after the reason for the temporary stop has been cor-
rected.
Is displayed?
Cruise control cannot be set when is not displayed. Set cruise control when is displayed.
is not displayed.
Are the requirements for setting cruise control met?
In any of the following cases, will not be displayed. xThe brake pedal is depressed.
x The vehicle speed is over 90 MPH (145 km/h).
x The combination meter indicates a position other than . (The select
lever or paddle shift switches are manually operated.)
x The driver’s seatbelt is unfastened.
x Any door is opened (except the rear gate/trunk).
x The vehicle is on a steep grade.
x The steering wheel is turned significantly in either direction.
x Parking brake is applied.
D