2017 SKODA SUPERB Owner´s Manual

Settings
Automatic activation
The system is automatically activated when the igni-
tion is switched on.
Troubleshooting
Crew Protect Assist faulty illuminates together with
Message concerning unavailability or function-
al restriction

qO

Switch the view on/o

Area View environment overview
Usage
The area view assists the driver in parking and ma-
noeuvring by displaying the vehicle area.
Overview
General overview
A3D views:
Top view
View obliquely from above
View from the side
General overview
By moving your finger across the screen, you can
change the viewing angle.
Camera rear view
AMode for transverse parkingBMode for parallel parkingCMode for driving up to a trailer/distance moni-
toringDMode for monitoring the area behind the vehicle
(wide view)Front camera viewAMode for transverse parking
The orientation lines are used for estimating dis-
tance as well as for displaying the route, which is
controlled at the current steering angle.BMode for monitoring the area in front of the ve-
hicle (wide view)
The area right in front of the vehicle is marked
by the blue lines.CDistance monitoring mode
Side camera view
ALeft sideBRight sideCLeft and right side
The yellow line is shown at a distance of about
40 cm from the vehicle.
Operating conditions
q The ignition is switched on.
q The driving speed is lower than 15 km/h.
Operation
Switching on

ted area is highlighted on the screen by a yellow bor-
der.
Switching off

What you should be mindful of
Do not use the Park Assist in the following cases.

Getting out of a parallel parking space