2017 Seat Leon SC Appendix Digital Cockpit

Instruments and control lampspossible that adjustments cannot be per-
formed and information cannot be displayed
as described. In this case, go to a specialised
workshop and request the repair of the
faults.
Fuel gauge
Fig. 3
Fuel gauge in the SEAT Digital Cockpit.
Fuel tank almost empty

The control lamp turns yellowThe fuel in the reserve is being used (red mark) ››› .Refuel as soon as possible.
Presence of water in the fuel

The control lamp turns yellowSwitch the engine off and seek professional assistance.WARNINGIf a vehicle is driven with too low a fuel level,
it could stop in traffic and accidents and seri- ous injuries could occur.●
If the level of the fuel tank is too low, the
fuel could reach the engine irregularly, espe- cially when going up or down slopes.
●
The steering and the driver and braking as-
sist systems do not work if the engine runs ir- regularly or if it switches itself off due to lack
of fuel or its irregular topping up.
●
Refuel as long as there is only a quarter of
fuel left in the tank to prevent the vehicle
from stopping due to lack of fuel.
CAUTIONNever run the fuel tank completely dry. If the
fuel is not topped up regularly, it may cause
faulty combustion and unburnt fuel could
reach the exhaust system. The catalytic con-
verter or the particle filter could be damaged!NoteThe small arrow on the fuel gauge next to the
fuel dispenser symbol points to the side of
the vehicle where the fuel tank flap is loca-
ted.Engine coolant temperature displayFig. 4
Engine coolant temperature display in
the SEAT Digital Cockpit.
Cold area. The engine has not yet
reached the operating temperature. Avoid
high engine speeds and subjecting the
engine to high stress as long as it has not
reached the operating temperature.
Normal area
Warning area. If the engine is subjected
to high stress, especially at high exterior
temperatures, the light emitting diodes
can light up in the warning area.
Engine coolant

The control lamp lights up and thecentral warning light flashes red.The engine coolant level is not correct or there is a faultin the coolant system. Do not carry on driving!
»ABC7

Operating the instrument panel●Stop the vehicle, switch off the engine and
let it cool.●
Check the engine coolant level.
●
If the warning lamp does not go out even if
the coolant level is correct, seek professional
assistance.
Operating the instrument panel
Topic introduction
Some menu options can only be opened
when the vehicle is at a standstill.
WARNINGDistracting the driver in any way can lead to
an accident and cause injuries.●
Never use the menus on the instrument
panel display while driving.
NoteAfter charging or changing the 12-volt bat-
tery, check the system settings. In case of in-
terruption of the power supply, the system
settings may have changed or been deleted.Operation with the multifunction
steering wheelFig. 5
Right side of the multifunction steering
wheel: buttons to use the menus and infor-
mative displays of the instrument panel.
As long as there is a priority 1 warning
››› page 6
, no menu can be accessed. Some
warnings can be confirmed and hidden with
the 
button of the multifunction steering
wheel ››› Fig. 5
.
Select a menu or an informative display
●
Switch the ignition on.
●
If a message or vehicle symbol is dis-
played, press the 
››› Fig. 5
button; several
times if required.
●
To switch menus use the 
 or 
››› Fig. 5
buttons.
●
To open the menu or the informative dis-
play that appears, press the 
››› Fig. 5
but-
ton or wait a few seconds until the menu or
informative display opens automatically.
Adjust menu settings●
In the displayed menu, turn the right
thumbwheel of the multifunction steering
wheel ››› Fig. 5 until the desired menu option
is selected. The option is highlighted.
●
Press the 
››› Fig. 5 button for the desired
modifications. When the function or system
in question are highlighted, it means they
are enabled.
Return to menu selection
Press the button 

or 

››› Fig. 5
.
NoteIf, when the ignition is switched on, warnings
about existing faults are displayed, it is pos-
sible that adjustments cannot be performed
and information cannot be displayed as de-
scribed. In this case, go to a specialised
workshop and request the repair of the
faults.8

Multifunction steering wheel*Multifunction steering wheel*Operating audio, telephone and navigation with voice control
3 Valid for vehicles with SEAT Digital Cockpit (digital panel).
Fig. 6
Controls on the steering wheel.
The steering wheel includes multifunction
modules from where it is possible to controlthe audio, telephone and radio/navigation
functions without needing to distract the
driver.ButtonRadioMedia (except AUX)AUXTelephonea)Navigationa)ATurnTurn volume up/down. You donot need to be in audio mode(radio).Turn volume up/down. You donot need to be in audio mode(media).Turn volume up/down. You donot need to be in audio mode(media).Turn volume up/down. You donot need to be in telephonemode.Turn announcement volumeup/down. You do not need tobe in navigation mode butthere has to be an announce-ment active when you adjustthe volume.APressMute volume.Mute volume.Mute volume.Mute an incoming call.Mute the current navigation an-nouncement.Ba)Enable/disable voice controlb).This function can be performed from any mode, except if there is an active call.
»9

Operating audio, telephone and navigation with voice controlButtonRadioMedia (except AUX)AUXTelephonea)Navigationa)C/DSearch for the previous/nextstationc).Short press: Switch to the pre-vious/next song. Hold down: Fast rewind/for-wardd).No function– No active call: Radio/Mediafunctionality (except AUX) – Active call: no functionNo function for the othermodes (navigation, assistants,vehicle status, lap timer*, driv-ing data).E/Fa)Change menu on instrument panel.b)GShort press: change view Classic Info - Digital Maps - Advanced Info b).Hold down: access the setting view of the “Customised Profiles”b).HTurnList of available functions (au-dio/media).List of available functions (au-dio/media).No function– There is no active call: List oflast calls. – Active calls: access the calloptions list (call on hold, hangup, mute microphone, privatenumber, etc.).– Navi System Plus: Zoomin/out (with and without activeroute). – Navi System: If there is a mapin the Digital Panel: Zoomin/out (with and without activeroute). If there is no map in theDigital Panel: transfer the mapto the Digital Panel (with andwithout active route).HPressNo functionNo functionNo functionNo functionAuto Zoom/Manual Zoom if themap is in the Digital Panel.a)Depending on the vehicle's equipment package.b)This function can be used from any mode (audio, media, navigation, assistants, vehicle status, lap timer*, driving data).c)This action can be performed when you are listening to the radio; there is no need to be in audio-radio mode.d)These actions can be performed when you are listening to media; there is no need to be in audio-media mode.10

SEAT S.A. is permanently concerned about continuous development of its t\�ypes and models. For this reason we ask you to under-stand, that at any given time, changes regarding shape, equipment and te\�chnique may take place on the car delivered. For this reason no right at all may derive based on the data, drawings and descriptions \�in this current handbook.
All texts, illustrations and standards in this handbook are based on the\� status of information at the time of printing. Except for error or omission, the information included in the current handbook is valid a\�s of the date of closing print.
Re-printing, copying or translating, whether total or partial is not all\�owed unless SEAT allows it in written form.
SEAT reserves all rights in accordance with the “Copyright” Act.
All rights on changes are reserved.
❀This paper has been manufactured using bleached non-chlorine cellulose.
© SEAT S.A.

5F0012720FS
Inglés
5F0012720FS
(01.18)